การประเมินผลกระทบของฉนวนกันความร้อนต่อสะพานความร้อนบริเวณจุดต่อผนังคอนกรีตสำเร็จรูปในอาคารที่พักอาศัย

Sirun  Hongyot; Withaya  Puangsombut; Jirasak  Pukdum

Authors

Sirun Hongyot Doctoral student, Doctor of Philosophy Program, Smart Energy and Environment Management Program, Rattanakosin College for Sustainable Energy and Environment, Rajamangala University of Technology Rattanakosin
Withaya Puangsombut Assistant Professor, Smart Energy and Environment Management Program, Rattanakosin College for Sustainable Energy and Environment, Rajamangala University of Technology Rattanakosin
Jirasak Pukdum Lecturer, Construction Management and Building Innovation Program, Faculty of Architecture and Design, Rajamangala University of Technology Rattanakosin

Keywords:

Thermal bridge, Thermal insulation, Precast concrete walls

Abstract

The study aims to compare the linear thermal transmittance of precast concrete wall connection in residential buildings, both insulated and non-insulated conditions, using Physibel-SOLIDO in accordance with ISO 10211. The insulation case decreased linear thermal transmittance by 9.46% and total heat transfer reduction by 4.76%. Furthermore, insulation reduced heat accumulation at connection and stabilized interior temperature, significantly enhancing energy efficiency for buildings in tropical regions.

References

International Energy Agency. Energy efficiency 2022 [Internet]. Paris: IEA; 2022 [cited 2025 Mar 16]. Available from: https://www.iea.org/reports/energy-efficiency-2022

Theodosiou TG, Papadopoulos AM. The impact of thermal bridges on the energy demand of buildings with double brick wall constructions. Energy Build. 2008;40(11):2083-9.

Ge H, Baba F. Dynamic effect of thermal bridges on the energy performance of a low-rise residential building. Energy Build. 2015;106:149-57.

Zhang X, Jung GJ, Rhee KN. Performance evaluation of thermal bridge reduction method for balcony in apartment buildings. Buildings. 2022;12(1):63.

Kim H, Yeo M. Thermal bridge modeling and a dynamic analysis method using the analogy of a steady-state thermal bridge analysis and system identification process for building energy simulation: Methodology and validation. Energies. 2020;13(17):4422.

Chen G, Hou Y, Ge H, Zhang S, Liu X, Guo X, et al. Effect of thermal bridges on the energy performance of Chinese residential buildings. Energy Built Environ. 2024. Available from: https://doi.org/10.1016/j.enbenv.2024.02.003

Snp-Post Tension Co., Ltd. Primo Posto – Kaset Nawamin Road [Internet]. [cited 2025 Mar 16]. Available from: https://snp-precast.snp-post.com/precast-project/detail-project/78

Ministry of Energy. Notification of the Ministry of Energy: Criteria and calculation methods for building design by system. Bangkok: Ministry of Energy; 2009. Thai.

Physibel. Material properties and boundary conditions EN ISO 10077-2, EN ISO 10456, EN ISO 6946: Physibel software knowledge base. Maldegem (BE): Physibel; 2021.

Simões N, Prata J, Tadeu A. 3D dynamic simulation of heat conduction through a building corner using a BEM model in the frequency domain. Energies. 2019;12(23):1-27.

Iodice P, Massarotti N, Mauro A. Effects of inhomogeneities on heat and mass transport phenomena in thermal bridges. Energies. 2016;9(3):1-21.

International Organization for Standardization. ISO 10211:2017 thermal bridges in building construction—heat flows and surface temperatures—detailed calculations. Geneva: ISO; 2017.

Santos P, Mateus D. Experimental assessment of thermal break strips performance in load-bearing and non-load-bearing LSF walls. J Build Eng. 2020;32:101693.

Meteorological Development Division. Bangkok climate [Internet]. Bangkok: Thai Meteorological Department; 2023 Jan [cited 2025 Mar 15]. Available from: http://climate.tmd.go.th/data/province/