A Design Method for Simple Repetitive Controllers for Multiple-Input/Multiple-Output Time-Delay Plants
Article Sidebar
Main Article Content
Abstract
The simple repetitive control system proposed by Yamada et al. is a type of servomechanism for the periodic reference input. That is, the simple repetitive control system follows the periodic reference input with small steady state error, even if a periodic disturbance or an uncertainty exists in the plant. In addition, simple repetitive control systems make transfer functions from the periodic reference input to the output and from the disturbance to the output have finite numbers of poles. In addition, Yamada et al. clarified the parameterization of all stabilizing simple repetitive controllers. Recently, the parameterization of all stabilizing simple repetitive controllers for time-delay plants was clarified by Yamada et al. However their method cannot be applied to multiple-input/multiple-output time-delay plants. In this paper, we propose the parameterization of all stabilizing simple repetitive controllers for multipleinput/ multiple-output time-delay plants.
Article Details
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
- Creative Commons Copyright License
The journal allows readers to download and share all published articles as long as they properly cite such articles; however, they cannot change them or use them commercially. This is classified as CC BY-NC-ND for the creative commons license.
- Retention of Copyright and Publishing Rights
The journal allows the authors of the published articles to hold copyrights and publishing rights without restrictions.
References
[2] T. Inoue, S. Iwai and M. Nakano, “High Accuracy Control of Play-Back Servo System”, The Trans. of The Institute of Electrical Engineers of Japan, Vol.C101, No.4, pp.89-96, 1981.
[3] S. Hara, T. Omata and M. Nakano, “Stability Condition and Synthesis Methods for Repetitive Control System”, Trans. of the Society of Instrument and Control Engineers, Vol.22, No.1, pp.36-42, 1986.
[4] S. Hara and Y. Yamamoto, “Stability of Multivariable Repetitive Control Systems - Stability Condition and Class of Stabilizing Controllers”, Trans. of the Society of Instrument and Control Engineers, Vol.22, No.12, pp.1256-1261, 1986.
[5] Y. Yamamoto and S. Hara, “The Internal Model Principle and Stabilizability of Repetitive Control System”, Trans. of the Society of Instrument and Control Engineers, Vol.22, No.8, pp.830-834,
1987.
[6] S. Hara, Y. Yamamoto, T. Omata and M. Nakano, “Repetitive Control System: A New Type Servo System for Periodic Exogenous Signals”, IEEE Trans. on Automatic Control, Vol.AC-33, No.7, pp.659-668, 1988.
[7] T. Nakano, T. Inoue, Y. Yamamoto and S. Hara, “Repetitive Control,” SICE Publications, 1989.
[8] S. Hara, P. Trannitad and Y. Chen, “Robust stabilization for repetitive control systems,” Proceedings of the 1st Asian Control Conference, pp.541-544, 1994.
[9] G. Weiss, “Repetitive Control Systems: Old and New Ideas,” Systems and Control in the Twenty-First Century, pp.389-404, 1997.
[10] T. Omata, S. Hara and M. Nakano, “Nonlinear Repetitive Control with Application to Trajectory Control of Manipulators”, J. of Robotic Systems, Vol.4, No.5, pp.631-652, 1987.
[11] K.Watanabe and M. Yamatari, “Stabilization of Repetitive Control System-Spectral Decomposition Approach”, Trans. of the Society of Instrument and Control Engineers, Vol.22, No.5, pp. 535-541, 1986.
[12] M. Ikeda and M. Takano, “Repetitive Control for Systems with Nonzero Relative Degree”, Proc. 29th CDC, pp. 1667-1672, 1990.
[13] H. Katoh and Y. Funahashi, “A Design Method of Repetitive Controlles”, Trans. of the Society of Instrument and Control Engineers, Vol.32, No.12, pp.1601-1605, 1996.
[14] K. Yamada, H. Takenaga, Y. Saitou and K. Satoh, “Proposal for simple repetitive controllers,” ECTI Transactions on Electrical Eng., Electronics, and Communications, Vol.6, pp.64-72, 2008.
[15] K. Yamada, H. Tanaka, H. Takenaga and M. Kobayashi, “A Design Method for Simple Repetitive Controllers for Time-Delay Plants”, ECTI Transactions on Electrical Eng., Electronics, and Communications, Vol.7, No.1, pp.42-51, 2009.
[16] D.C. Youla, H.A. Jabr and J.J. Bongiorno, Modern wiener-hopf design of optimal controllers. part I, IEEE Transactions on Automatic Control, Vol.21, pp.3-13, 1976.
[17] C.A. Desoer, R.W. Liu, J. Murray and R. Saeks, Feedback system design-The fractional representation approach to analysis and synthesis, IEEE Transactions on Automatic Control, Vol.25, pp.399-412, 1980.
[18] G. Zames, Feedback and optimal sensitivity: model reference transformations, multiplicative seminorms and approximate inverse, IEEE Transactions on Automatic Control, Vol.26, pp.301-320. 1981.
[19] M. Vidyasagar, “Control System Synthesis - A factorization approach -”, MIT Press, 1985.
[20] M. Morari and E. Zafiriou, Robust Process Con- trol, Prentice Hall, 1989.
[21] J.J. Glaria and G.C. Goodwin, A parametrization for the class of all stabilizing controllers for linear minimum phase systems, IEEE Transactions on Automatic Control, Vol.39, pp.433-434, 1994.
[22] K. Zhou, J.C. Doyle and K. Glover, Robust and optimal control, Prentice Hall, 1996.
[23] K. Yamada, A parametrization for the class of all proper stabilizing controllers for linear minimum phase systems, Preprints of the 9th IFAC/IFORS/IMACS/IFIP/ Symposium on Large Scale Systems: Theory and Applications, pp.578-583, 2001.
[24] K. Yamada, K. Satoh, Y. Mei, T. Hagiwara, I. Murakami and Y. Ando, The parametrization for the class of all proper internally stabilizing controllers for multiple-input/multipleoutput minimum phase systems, ICIC Express Letters, Vol.3, No.1, pp.67-72, 2009.