Performance Enhancement of PMSG Systems with Control of Generator-side Converter Using d-axis Stator Current Controller
Main Article Content
Abstract
This paper presents a performance enhancement of a permanent magnet synchronous generator (PMSG) system with control of generator-side converter for a wind turbine application. This method uses zero d- axis stator current control to minimize winding losses of the generator. The electromagnetic torque of the generator is correlated with the magnitude of the qaxis stator current, while the daxis stator current is regulated at zero, the control scheme decouples the dq-axis stator current control through a vector con- trol for the generator-side converter. This paper also presents mathematical analysis of the active power and stator power factor, and the maximum power point tracking (MPPT) operation. Simulation re- sults are provided to guarantee the proposed control scheme, in which the performance enhancement and eciency are evaluated.
Article Details
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
- Creative Commons Copyright License
The journal allows readers to download and share all published articles as long as they properly cite such articles; however, they cannot change them or use them commercially. This is classified as CC BY-NC-ND for the creative commons license.
- Retention of Copyright and Publishing Rights
The journal allows the authors of the published articles to hold copyrights and publishing rights without restrictions.
References
[2] J. M. Carrasco, L. G. Franquelo, J. T. B. Siewicz, E. Galvan, R. C. P. Guisado, A.M. Parts, J. I. Leon, and N. Moreno-Alfonso, "Power- electronic systems for the grid integration of renewable en-
ergy sources: A survey," IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1002-1016, Aug. 2006.
[3] A. Grauers, "Effciency of three wind energy generator systems," IEEE Trans. Energy Convers., vol. 11, no. 3, pp. 650-657, Sept. 1996.
[4] Z. Chen, and E. Spooner, "Wind turbine power converters: a comparative study," Proc. 1998 IEE Power Electron. Variable Speed Drives Seventh Int. Conf., 1998, pp. 471-476.
[5] M. Chinchilla, S. Arnaltes, and J. C. Burgos, "Control of permanent-magnet generators applied to variable-speed wind-energy systems connected to the grid," IEEE Trans. Energy Convers., vol. 21, no. 1, pp. 130-135, Mar. 2006.
[6] K. Huang, S. Huang, F. She, B. Luo, and L. Cai, "A control strategy for direct-drive permanent magnet wind-power Generator using back-to-back PWM converter," ICEMS Conf., 2008, pp. 2283-2288.
[7] S. Zhang, K. Tseng, D. M. Vilathgamuwa, and T. D. Nguyen, "Design of a robust grid interface system for PMSG-based wind turbine generators," IEEE Trans. Ind. Electron., vol. 58, no. 1, pp.
316-328, Jan. 2011.
[8] E. Koutroulis and K. Kalaitzakis, "Design of a maximum power tracking system for wind-energy-conversion applications," IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 486-494, Apr. 2006.