A Method for Designing Modified PID Controllers for Time-delay Plants and Their Application
Article Sidebar
Main Article Content
Abstract
In this paper, we examine a method for designing modified proportional-integral-derivative (PID) controllers for use in stable and/or minimum-phase time-delay plants. The PID controller structure is the one used most widely in industrial applications. Recently, the parameterization of all stabilizing PID controllers has been considered. However, no method which guarantees the stability of a PID control system for any stable and/or minimum-phase time-delay plants, and in which the admissible sets of P-, I- and D-parameters are independent from each other, has been published. In this paper, we propose a method for designing modi¯ed PID controllers such that the modified PID controller makes the feedback control system for any stable and/or minimum-phase time delay plant stable and the admissible sets of P-, I- and D-parameters are independent from each other. Numerical examples and application in a heat flow experiment are shown to illustrate the effectiveness of the proposed method.
Article Details
This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.
- Creative Commons Copyright License
The journal allows readers to download and share all published articles as long as they properly cite such articles; however, they cannot change them or use them commercially. This is classified as CC BY-NC-ND for the creative commons license.
- Retention of Copyright and Publishing Rights
The journal allows the authors of the published articles to hold copyrights and publishing rights without restrictions.
References
[2] K. Astrom and T. Hagglund, PID controllers: Theory design, and tuning, Instrument Society of America, North Carolina, 1995.
[3] A. Datta, M. T. Ho and S. P. Bhattacharyya, Structure and Synthesis of PID Controllers, Springer-Verlag, London, 2000.
[4] J.G. Zieglae and N.B. Nicholes, Optimum settings for automatic controllers, Trans. ASME, 64, pp.759-768, 1942.
[5] P. Hazebroek and B.L. van derWarden, The Optimal Adjustment of Regulators, Trans. ASME, 72, pp.317-332, 1950.
[6] P. Hazebroek and B.L. van der Warden, Theoretical Considerations on the Optimal Adjustment of Regulators, Trans. ASME, 72, pp.309-315, 1950.
[7] W.A. Wolf, Controller Setting for Optimum Control, Trans. ASME, 73, pp.413-418, 1951.
[8] K.L. Chien, J.A. Hrones and J.B. Reswick, On the Automatic Control of Generalized Passive Systems, Trans. ASME, 74, pp.175-185, 1952.
[9] G.H. Cohen and G.A. Coon, Theoretical Consideration of Retarded Control, Trans. ASME, 75, pp.857-834, 1953.
[10] A.M. Lopez, J.A. Miller, C.L. Smith and P.W. Murrill, Tuning Controllers with Error-Integral Criteria, Instrumentation Technology, 14, pp.52-62, 1967.
[11] J.A. Miller, A.M. Lopez, C.L. Smith and P.W. Murrill, A Comparison of Controller Tuning Techniques, Control Engineering, 14, pp.72-75, 1967.
[12] T. Kitamori, A Method of Control System Design Based upon Partial Knowledge About Controlled process, Transactions of the Society of Instrument and Control Engineers, 15-4, pp.549-555, 1979 (in Japanese).
[13] T. Kitamori, Design Method for PID Control Systems, Journal of the Society of the Instrument and Control Engineers, 19-4, pp.382-391, 1980 (in Japanese).
[14] P. Cominos and N. Munro, PID Controllers: Recent Tuning Methods and Design to Specification, IEE Proceedings, 149, pp.46-53, 2002.
[15] F. Zheng, Q.G. Wang and T.H. Lee, On the Design of Multivariable PID Controllers via LMI Approach, Automatica, 38-3, pp.517-526, 2002.
[16] C. Lin, Q.G. Wang and T.H. Lee, An Improvement on Multivariable PID Controller Design via Iterative LMI Approach, Automatica, 40-3, pp.519-525, 2004.
[17] N. Viorel, M. Constantin, A. Dorel and C. Emil, Aspects of Pole Placement Technique in Symmetrical Optimum Method for PID Controller Design, Preprints of the 16th IFAC World Congress DVD-ROM, 2005.
[18] K. Tamura and K. Shimizu, Eigenvalue Assignment Method by PID Control for MIMO System, Transactions of The Institute of Systems, Control and Information Engineers, 19-5, pp.193-202, 2006 (in Japanese).
[19] J. Yang, Parameter Plane Control Design for a Two-tank Chemical Reactor System, Journal of the Franklin Institute, Vol.331B, pp.61-76, 1994.
[20] M. T. Ho, A. Datta and S. P. Bhattacharyya, "A linear programming characterization of all stabilizing PID controllers", Proceedings of the American Control Conference 1997, pp.3922-3928, 1997.
[21] K. Yamada and T. Moki, "A design method for PI control for minimum phase systems", Intelligent Engineering Systems Through Artificial Neural Networks, Vol.13, pp.571-576, 2003.
[22] K. Yamada, "Modified PID controllers for minimum phase systems and their practical application", Proceedings of The 2005 Electrical Engineering/Electronics, Computer, Telecommunication, and Information Technology (ECTI) International Conference, Vol.II, 2005.
[23] K. Yamada, N. Matsushima and T. Hagiwara, "A design method for modified PID controllers for stable plants", Proceedings of the 2006 Electrical Engineering/Electronics, Computer, Telecommunication, and Information Technology (ECTI) International Conference, Vol.I of II, pp.123-126, Ubon Ratchathani, Thailand, 2006.
[24] K. Yamada, N. Matsushima and T. Hagiwara, "A design method for modified PID controllers for stable plants", ECTI Transactions on Electrical Eng., Electronics, and Communications, Vol.5-1, pp.31-40, 2007.
[25] K. Yamada and N. Matsushima,"A design method for Smith predictors for minimum phase time-delay plants", ECTI Transactions on Computer and Information Technology, Vol.2-2, pp.100-107, 2005.
[26] O.J.M. Smith, "A controller to overcome deadtime", ISA Journal, Vol. 6, pp. 28-33, 1959.
[27] M. Morari and E. Zafiriou, Robust process control, PTR Prentice Hall, New Jersey, 1989.
[28] M. Vidyasagar, Control system synthesis-A factorization approach-, MIT Press, London, 1985.
[29] H. Kimura, "Is the Model a Good Controller? Perspectives on Brain Motor Control", Proceedings of CDC, 2000.