A Microstrip Low-Pass Filter Design Using a Modified Radial Resonator in the Application of Aircraft Distance Measurement Equipment

Main Article Content

Hamid Radmanesh

Abstract

In this paper, the application of microstrip technology is investigated in low-pass filters. A cascade microstrip low-pass filter with a sharp frequency response and a good cut-off bandwidth is presented using a modified radial resonator. The advantages of this proposed filter include minor losses in the transit band as well as the desired return. This filter design shows consistency when compared with the results of simulation and model performance. A comparison between the parameter values of this filter and previous structures indicates that it is desirable. The proposed filter can be used in modern communication systems such as aircraft distance measurement equipment (DME) antenna.

Article Details

How to Cite
Radmanesh, H. (2021). A Microstrip Low-Pass Filter Design Using a Modified Radial Resonator in the Application of Aircraft Distance Measurement Equipment. ECTI Transactions on Electrical Engineering, Electronics, and Communications, 19(3), 260–267. https://doi.org/10.37936/ecti-eec.2021193.241039
Section
Publish Article

References

J.-S. Hong and M.J. Lancaster, Microstrip Filters for RF/Microwave Applications, NY, USA: John Wiley & Sons, 2001.

A. I. Loinaz and C. d. R. Bocio, “EBG at Microwave Frequency Range: Bragg and/or Resonant Effect?,” Microwave and Optical Technology Letters, vol. 42, no. 5, pp. 383–385, Sep. 2004.

F.-R. Yang, Y. Qian, and T. Itoh, “A novel uniplanar compact PBG structure for filter and mixer applications,” in 1999 IEEE MTT-S International Microwave Symposium Digest, vol. 3, 1999, pp. 919–922.

Y. Rao, H. J. Qian, B. Yang, R. Gómez-García, and X. Luo, “Dual-Band Bandpass Filter and Filtering Power Divider With Ultra-Wide Upper Stopband Using Hybrid Microstrip/DGS Dual-Resonance Cells,” IEEE Access, vol. 8, pp. 23624–23637, 2020.

L. H. Weng, Y.-C. Guo, X.-W. Shi, and X.-Q. Chen, “An overview on defected ground structure,” Progress In Electromagnetics Research B, vol. 7, pp. 173–189, 2008.

M. N. Jahromi, “Wide stopband compact microstrip lowpass filter using circular ring resonator and split ring resonators,” Microwave and Optical Technology Letters, vol. 53, no. 9, pp. 1961–1964, Sep. 2011.

H. Taher, “High-performance low-pass filter using complementary square split ring resonators defected ground structure,” IET Microwaves, Antennas & Propagation, vol. 5, no. 7, pp. 771–775, May 2011.

A. S. Mohra, “Microstrip low pass filter with wideband rejection using opened circuit stubs and Z-slots defected ground structures,” Microwave and Optical Technology Letters, vol. 53, no. 4, pp. 811–815, Apr. 2011.

V. K. Velidi, “Dual-Transmission-Line Microstrip Equiripple Lowpass Filter with Sharp Roll-Off,” ETRI Journal, vol. 33, no. 6, pp. 985–988, Dec. 2011.

J. Ni and J. Hong, “Compact Continuously Tunable Microstrip Low-Pass Filter,” IEEE Transactions on Microwave Theory and Techniques, vol. 61, no. 5, pp. 1793–1800, May 2013.

V. K. Velidi and S. Sanyal, “Sharp Roll-Off Lowpass Filter With Wide Stopband Using Stub-Loaded Coupled-Line Hairpin Unit,” IEEE Microwave and Wireless Components Letters, vol. 21, no. 6, pp. 301–303, Jun. 2011.

M. Hayati, F. Shama, and H. Abbasi, “Compact microstrip lowpass filter with wide stopband and sharp roll-off using tapered resonator,” International Journal of Electronics, vol. 100, no. 12, pp. 1751–1759, Dec. 2013.

K. Ma, K. S. Yeo, and W. M. Lim, “Ultra-wide rejection band lowpass cell,” Electronics Letters, vol. 48, no. 2, pp. 99–100, 19 January 2012.

J. Wang, L.-J. Xu, S. Zhao, Y.-X. Guo, and W. Wu, “Compact quasi-elliptic microstrip lowpass filter with wide stopband,” Electronics Letters, vol. 46, no. 20, pp. 1384–1385, 30 Sep. 2010.

M. Hayati, H. Asadbeigi, and A. Sheikhi, “Microstrip lowpass filter with high and wide rejection band,” Electronics Letters, vol. 48, no. 19, pp. 1217–1219, 13 Sep. 2012.