LabVIEW Applications for Optical Instruments Calibration
Article Sidebar
Main Article Content
Abstract
This paper proposes application for calibrating the light source using the LabVIEW program. A LabVIEW program is used for controlling parameters of optical measuring system (OMS-100). This program allows us to analyze the relative error and display the relation between the relative error and time, according to the consideration for standard criterion of light source equipment. Obviously, our system can obtain the high performance and reduce the error of the calibration.
Article Details
Copyright @2021 Engineering Transactions
Faculty of Engineering and Technology
Mahanakorn University of Technology
References
S. Grubb, P. Mertz, A. Kumpera, L. Dardis, J. Rahn, J. O’Connor, and M” Mitchell, “Real-Time 16QAM Transatantic Record Spectral Efficiency of 6.21 b/s/Hz Enabling 26.2 Tbps Capacuty”, Optical Fiber Communication Conference (OFC) 2019, paper M2E.6, 3-7 March 2019.
H. C. Chien, J. Yu, Y. Cai, B. Zhu, X. Xiao, Y. Xia, X. Wei, T. Wang, and Y. Chen, “Approaching Terabits Per Carrier Metro-Regional Transmission Using Beyond-100GBd Coherent Optical With Probabilistically Shaped DP-64QAM Modulation”, Journal Lightwave Technology, vol. 37, Issue 8, pp. 1751-1755, 2019.
S. Weinstein, Y. Luo, T. Wang, “Passive Optical Network”, IEEE PRESS, 2012.
D. Kiycioglu, N. Oziem Unverdi, “Applications of FTTx technology in optical communication systems”, The 26th Signal Processing and Communications Applications Conference, 2-5 May 2018.
Vicent C. Y. So, Jing Wen Jiang, James A. Cargill, Paul J. Vella, “Automation of an Optical Time Domain Reflectometer to Measure Loss and Return Loss”, Journal Lightwave Technology, vol. 8, Issue 7, pp. 1078-1083, 1990.
W. Rutzen, W. Stocklein, C. Unger, “Calibration of optical time domain reflectometers”, Optical Communications, vol. 127, pp. 343-352, 1996.
A. Zanobini, G. Iuculano, A. Ponterio, “Distance Scale Calibration of Optical Time-Domain Reflectometer with the Recirculating Delay Line Method”, IEEE Transaction on Instrumentation and Mesurement, vol. 54, no. 6, pp. 2554-2556, 2005.
A. Zanobini, A. Ponterion, G. Iuculano, “Traceability of Measurement on Optical Fiber and Calibration of Optical Reflectometer in Time Domain”, 10th IMEKO Conference on Technical Diagnostics, 2005.
A. Zgalj, E. Skajio, E. Kadusic, “Pulse width as Influencing Factor in Optical Time Domain Reflectometry Measurements”, TELFOR-2011, 2011.
สมมาตร แสงเงิน, “การพัฒนาระบบสอบเทียบเครื่องมือวัดทางแสงโอทีดีอาร์”, การประชุมวิชาการทางวิศวกรรมไฟฟ้าครั้งที่ 37 (EECON-37), หน้า 917-922, 2557.
กรีธา ไตรสนธ์ และ สมมาตร แสงเงิน, “ผลกระทบความกว้างของพัลส์แสงต่อค่าความถูกต้องระยะทางของเครื่องมือทกสอบโอทีดีอาร์”, การประชุมวิชาการทางวิศวกรรมไฟฟ้าครั้งที่ 39 (EECON-39), หน้า 697-700, 2559.
ISO/IEC 17025:2017, “General Requirements for The Competence of Testing and Calibration Laboratories”, 2017.
Stephanie Bell, “A Beginner’s Guide to Uncertainty of Measurement”, Issue 2, National Physical Laboratory (NPL), March 2001.