Continuous Para Rubber Press Machine

Article Sidebar

FULL TEXT IN THAI

Main Article Content

Banchob Orachon
King Mongkut's University of Technology Thonburi, Bangmod, Toongkru, Bangkok 10140
Anusit Anmanatarkul
King Mongkut's University of Technology Thonburi, Bangmod, Toongkru, Bangkok 10140
Thanongsak Pakdeebun
King Mongkut's University of Technology Thonburi, Bangmod, Toongkru, Bangkok 10140
Thawiwat Sangman
King Mongkut's University of Technology Thonburi, Bangmod, Toongkru, Bangkok 10140

Abstract

The project was to study and develop continuous Para Rubber Press Machine. Manual Para RubberPress composes of two sections which are smooth roller and stripe roller. The two sections of original Pararubber sheet irons are combined together to form continuous Para Rubber Press Machine. Continuous ParaRubber Press Machine was composed of three sets of smooth roller and one sets of stripe roller. These toolsmake process complete. Using AC 220 V motor operated with 4 sets of continuous rollers, save time andworkforce. The invented Continuous Para Rubber Press Machine was pre - tested with prepared latex.After adjustment of roller spacing, we had found that quality and productivity was increased. Compare tothe original Continuous Para Rubber Press Machine, Continuous Para Rubber Press Machine could pressrubber from 36 mm. to 3.2 mm. thickness. It used only 8 - 10 seconds instead of 2 minutes to produce 1rubber sheet. So, it was shown that the invented Continuous Para Rubber Press Machine could help savingtime and load of work for more than 50 percent.

Keyword : Manual Para Rubber Press

Article Details

Issue
Vol. 30 No. 1 (2007): January - March
Section
Technical Report
Author Biographies

Banchob Orachon, King Mongkut's University of Technology Thonburi, Bangmod, Toongkru, Bangkok 10140

Assistant Professor, Department of Mechanical Technology Education, Faculty of Industrial Education and Technology.

Anusit Anmanatarkul, King Mongkut's University of Technology Thonburi, Bangmod, Toongkru, Bangkok 10140

Lecturer, Department of Mechanical Technology Education, Faculty of Industrial Education and Technology.

Thanongsak Pakdeebun, King Mongkut's University of Technology Thonburi, Bangmod, Toongkru, Bangkok 10140

Undergraduate Student, Department of Mechanical Technology Education, Faculty of Industrial Education and Technology.

Thawiwat Sangman, King Mongkut's University of Technology Thonburi, Bangmod, Toongkru, Bangkok 10140

Undergraduate Student, Department of Mechanical Technology Education, Faculty of Industrial Education and Technology.