Energy-Efficient Paddy Rice Dehumidification using a Thermosyphon System
Main Article Content
บทคัดย่อ
Efficient post-harvest drying is vital to maintain paddy rice quality, prevent spoilage, and extend storage life. This study presents a thermosyphon-based dehumidification system, tested with hot air and hot water heating at 60, 70, and 80 ◦C. The system includes a cylindrical drying chamber with automated controls for higher efficiency. Performance was evaluated using drying time, energy efficiency, and specific energy consumption (SEC). Results showed the system reduced paddy rice moisture from 26.65% to the target 14% (d.b.). Drying times with hot air were 128, 76, and 50 hours, while hot water required 104, 62, and 42 hours at 60, 70, and 80 ◦C, respectively. Hot water at 80 ◦C achieved the fastest drying, completing the process in 42 hours. Energy performance analysis revealed the lowest SEC of 89.05 kWh/kg𝑤𝑎𝑡𝑒𝑟 for hot water at 80 ◦C, whereas hot air at 60 ◦C recorded the highest SEC of 1,204 kWh/kg𝑤𝑎𝑡𝑒𝑟 . Overall, the thermosyphon system demonstrated strong potential for balancing drying speed and energy use. The study supports thermosyphon-based drying as a scalable, energy-efficient solution for post-harvest rice management, with hot water offering both rapid drying and efficiency
Article Details

อนุญาตภายใต้เงื่อนไข Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
เอกสารอ้างอิง
Muthayya S, Sugimoto JD, Montgomery S, Maberly GF. An overview of global rice production, supply, trade, and consumption. Ann N Y Acad Sci. 2014;1324(1):7–14.
Müller A, Nunes MT, Maldaner V, Coradi PC, de Moraes RS, Martens S, Leal AF, Pereira VF, Marin CK. Rice drying, storage and processing: effects of postharvest operations on grain quality. Rice
Sci. 2022;29(1):16–30.
Bharathi SM, Vasanthi R, Selvi RP, Kalpana M, Murugananthi D. Evaluation on post-harvest losses of paddy in Tiruvallur district: a study of statistical approach. Int J Plant Soil Sci. 2023;35(18):410–7.
Huey SL, Konieczynski EM, Mehta NH, Krisher JT, Bhargava A, Friesen VM, Mbuya MNN, Monterrosa EC, Nyangaresi AM, Mehta S. A systematic review of the impacts of post-harvest handling on provitamin A, iron and zinc retention in seven biofortified crops. Nat Food. 2023;4(11):978–85.
Thongdang S, Sichamnan S, Chokphoemphun S, Donmuang A, Pipatpaiboon N. Case study of design and construction of dehydration for paddy by heat exchanger rectangular two-phase closed
thermosyphon (DP-HE/RTPCT). Case Stud Therm Eng. 2024;57:103951.
Rubin BD, Mayo F, Maglasang RS. Modeling the rice self-sufficiency in the Philippines. Sci Technol Asia. 2024;29(3):197–213.
Sangiamsuk S, Boothaisong S, Dangton W. Heat pipe with wicks for paddy dehydration. J Sci Technol. 2020;39:653–63.
Chojnacka K, Mikula K, Izydorczyk G, Skrzypczak D, Witek-Krowiak A, Moustakas K, Ludwig W, Kułażyński M. Improvements in drying technologies: efficient solutions for cleaner production with higher energy efficiency and reduced emission. J Clean Prod. 2021;320:128706.
Parametthanuwat T, Pipatpaiboon N, Bhuwakietkumjohn N, Sichamnan S. Heat transfer characteristics of closedend thermosyphon (CE-TPCT). Eng Sci Technol Int J. 2022;27:101020.
Xu X, Zhao T, Ma J, Song Q, Wei Q, Sun W. Application of two-stage variable temperature drying in hot air-drying of paddy rice. Foods. 2022;11(6):888.
Wiriyaumpaiwong S, Soponronnarit S, Prachayawarakorn S. Drying and urease inactivation models of soybean using two-dimensional spouted bed technique. Dry Technol. 2006;24(12):1673–81.
Ritthong N, Thongkom S, Sawisit A, Duangsa B, Ritthong W. Optimization design of closed-loop thermosyphons: experimentation and computational fluid dynamics modeling. Energies. 2024;17(2):527.
Nimmol C, Devahastin S. Evaluation of performance and energy consumption of an impinging stream dryer for paddy. Appl Therm Eng. 2010;30(14–15):2204–12.
Ding T, Du X, Zhou Q, et al. Principles of loop thermosyphon and its application in data center cooling systems: a review. Renew Sustain Energy Rev. 2021;150:111389.
Ortiz-Rodríguez NM, AlmonacidCabrera H, Morales-Arce L, et al. Solar drying technologies: a review and future research directions with a focus on agro-industrial applications. Appl Therm Eng. 2022;215:118993.
Ghazi ZM, Rizvi SWF, Shahid WM, Abdulhameed AM, Saleem H, Zaidi SJ. An overview of water desalination systems integrated with renewable energy sources. Desalination. 2022;542:116063.
Poungthong P, Kolitawong C, Giacomin AJ. Cooling and annealing of plastic pipe. Therm Sci Eng Prog. 2021;25:100970.
Poungthong P, Kolitawong C, Saengow C, Giacomin AJ. Plastic pipe solidification in extrusion. J Polym Eng. 2018;38(6):591–603.
Poungthong P, Saengow C, Kolitawong C, Giacomin AJ. Wire coating and melt elasticity. Phys Fluids. 2024;36(5).
Fernandes L, Tavares PB. A review on solar drying devices: heat transfer, air movement, and type of chambers. Solar MDPI. 2024;1:15–42.
Pandey S, Kumar A, Sharma A. Sustainable solar drying: recent advances in materials, innovative designs, mathematical modeling, and energy storage solutions. Energy. 2024;132725.
Herrera B, Gallego A, Cacua K. Experimental evaluation of a thermosyphonbased heat exchanger working with a graphene oxide nanofluid in a cogeneration system. Therm Sci Eng Prog.
;24:100949.