Investigation of the Sound Absorption and Transmission Loss Performances of Green Homogenous and Hybrid Luffa and Jute Fiber Samples

Article Sidebar

PDF
Published: Oct 7, 2021
DOI: https://doi.org/10.14416/j.asep.2021.04.005
Keywords:
Luffa Jute Hybrid fiber samples Sound absorption Transmission loss

Main Article Content

Ahmet C. Ozcan
Department of Mechanical Engineering, Istanbul Technical University, Istanbul, Turkey
Kenan Y. Sanliturk
Department of Mechanical Engineering, Istanbul Technical University, Istanbul, Turkey
Garip Genc
Department of Mechatronics Engineering, Marmara University, Istanbul, Turkey
Hasan Koruk
Department of Mechanical Engineering, MEF University, Istanbul, Turkey

Abstract

In order to promote the use of natural fibers in noise and vibration applications, the properties of these structures should be fully identified. The sound absorption coefficients (SACs) and transmission losses (TLs) of green luffa fiber samples are thoroughly investigated and their acoustic performances are compared with the acoustic performances of green homogenous jute and hybrid jute/luffa fiber samples in this study. For this purpose, green homogenous luffa and jute fiber samples and their green hybrid fiber samples with different thicknesses (10, 20, 30, and 40 mm) are produced and their SACs and TLs are determined using the impedance tube method. First, the methods for the experimental identification of acoustic properties are presented and the variations in the measured acoustic properties are identified. After that, the effects of sample thickness on the acoustic performances of homogenous luffa as well as jute samples and their hybrid fiber samples as a function of frequency are explored. The thickness-dependent tendencies of the SACs and TLs of homogenous and hybrid luffa and jute fiber samples for low, medium and high frequency ranges are determined. Then, the acoustic performances of the homogenous and hybrid luffa and jute samples are compared and evaluated. The results and analyses for the acoustic properties of homogeneous luffa and jute fiber samples and their hybrid fiber samples for a variety of thicknesses and different frequencies presented here can be used to design homogenous as well as hybrid luffa and jute fiber structures in practical applications.

Article Details

How to Cite
Ozcan, A. C., Sanliturk, K. Y., Genc, G., & Koruk, H. (2021). Investigation of the Sound Absorption and Transmission Loss Performances of Green Homogenous and Hybrid Luffa and Jute Fiber Samples. Applied Science and Engineering Progress, 14(4), 668–679. https://doi.org/10.14416/j.asep.2021.04.005
Issue
Vol. 14 No. 4 (2021): Special Issue
Section
Research Articles

References

[1] S. M. K. Thiagamani, S. Krishnasamy, and S. Siengchin, “Challenges of biodegradable polymers: An environmental perspective,” Applied Science and Engineering Progress, vol.12, no. 3, p. 149, 2019, doi: 10.14416/j.asep.2019.03.002.

[2] C. I. Perumal, “A review on characteristic of polymer composites with natural fiber used as a reinforcement material,” International Journal for Research in Applied Science and Engineering Technology, vol. 6, no. 1, pp. 1213–1217, 2013.

[3] H. Koruk and G. Genc, “Acoustic and mechanical properties of luffa fiber-reinforced biocomposites,” in Mechanical and Physical Testing of Biocomposites, Fibre-reinforced Composites and Hybrid Composites. Cambridge, UK:Woodhead Publishing, 2019, pp. 225–341.
[4] A. Verma, K. Joshi, A. Gaur, and V. K. Singh, “Starch-jute fiber hybrid biocomposite modified with an epoxy resin coating: Fabrication and experimental characterization,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 27, no. 5–6, 2018, Art. no. 20182006.

[5] Y. Saygili, G. Genc, K. Y. Sanliturk, and H. Koruk, “Investigation of the acoustic and mechanical properties of homogenous and hybrid jute and luffa bio composites,” Journal of Natural Fibers, May, 2020, doi: 10.1080/15440478.2020.1764446.

[6] S. M. Rangappa, S. Siengchin, and H. N. Dhakal, “Green-composites: Ecofriendly and sustainability,” Applied Science and Engineering Progress, vol. 13, no. 3, pp. 183–184, 2020, doi: 10.14416/j.asep. 2020.06.001.

[7] M. Jawaid and S. Siengchin, “Hybrid composites: A versatile materials for future,” Applied Science and Engineering Progress, vol. 12, no. 4, p. 223, 2019, doi: 10.14416/j.asep.2019.09.002.

[8] S. V. Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, “Are natural fiber composites environmentally superior to glass fiber reinforced composites?,” Composites Part A: Applied Science and Manufacturing, vol. 35, no. 3, pp. 371–376, 2003.

[9] Y. G. Thyavihalli Girijappa, S. M. Rangappa, J. Parameswaranpillai, and S. Siengchin, “Natural fibers as sustainable and renewable resource for development of eco-friendly composites: A comprehensive review,” Frontiers in Materials, vol. 6, Art. no. 226, 2019.
[10] P. V. Bansod, T. Mittal, and A. R. Mohanty, “Study on the acoustical properties of natural jute material by theoretical and experimental methods for building acoustics applications,” Acoustics Australia, vol. 44, pp. 457–472, 2016.

[11] H. Koruk and G. Genc, “Investigation of the acoustic properties of bio luffa fiber and composite materials,” Material Letters, vol. 157, pp. 166–168, 2015.

[12] V. O. A. Tanobe, T. H. D. Sydenstricker, M. Munaro, and S. C. Amico, “A comprehensive characterization of chemically treated Brazilian sponge-gourds (luffa cylindrica),” Polymer Testing, vol. 24, no. 4, pp. 474–482, 2005.

[13] G. Genc and H. Koruk, “Identification of the dynamic characteristics of luffa fiber reinforced bio-composite plates,” BioResources, vol. 12, no. 3, pp. 1558–1568, 2017.

[14] H. Koruk, A. C. Ozcan, G. Genc, and K. Y. Sanliturk, “Jute and luffa fiber-reinforced biocomposites: Effects of sample thickness and fiber/resin ratio on sound absorption and transmission loss performance,” Journal of Natural Fibers, Apr. 2021, doi: 10.1080/ 15440478.2021.1907832.

[15] S. Fatima and A. R. Mohanty, “Acoustical and fireretardant properties of jute composite materials,” Applied Acoustics, vol. 72, no. 2–3, pp. 108–114, 2011.

[16] M. Raj, S. Fatima, and N. Tandon, “Recycled materials as a potential replacement to synthetic sound absorbers: A study on denim shoddy and waste jute fibers,” Applied Acoustics, vol. 159, 2020, Art. no. 107070.

[17] S. Sengupta, G. Basu, M. Datta, S. Debnath, and D. Nath, “Noise control material using jute (Corchorus olitorius): Effect of bulk density and thickness,” the Journal of The Textile Institute, Mar. 2020, doi: 10.1080/00405000.2020.1744222.

[18] N. P. G. Suardana, I. K. G. Sugita, and I. G. N. Wardana, “Hybrid acoustic panel: The effect of fiber volume fraction and panel thickness,” Materials Physics and Mechanics, vol. 44, pp. 77– 82, 2020.

[19] M. M. F. Tahir, M. H. Nawi, R. Zulkifli, A. K. Elwaleed, and M. S. M. Yunoh, “The effect of thickness and density on the acoustics properties of Ceiba pentandra natural fiber,” ARPN Journal of Engineering and Applied Sciences, vol. 13, no. 9, pp. 3214–3218, 2018.

[20] Z. Y. Lim, A. Putra, M. J. M. Norand, and M. Y. Yaakob, “Sound absorption performance of natural kenaf fibres,” Applied Acoustics, vol. 130, pp. 107–114, 2018.

[21] E. Taban, A. Tajpoor, M. Faridan, S. E. Samaei, and M. H. Beheshti, “Acoustic absorption characterization and prediction of natural coir fibers,” Acoustics Australia, vol. 47, pp. 67–77, 2019.

[22] H. Koruk, “Assessment of the measurement and prediction methods for the acoustic properties of natural fiber samples and evaluation of their properties,” Journal of Natural Fibers, Apr. 2021, doi: 10.1080/15440478.2021.1907835.

[23] J. P. Arenas and M. J. Crocker, “Recent trends in porous sound-absorbing materials,” Sound & Vibration, vol. 44, pp. 12–17, 2010.