Applications of Hybrid Composites in Railway

Article Sidebar

PDF
Published: May 27, 2022
DOI: https://doi.org/10.14416/j.asep.2022.02.009
Keywords:
-

Main Article Content

Vinod Kushvaha
Department of Civil Engineering, Indian Institute of Technology Jammu, Jammu and Kashmir, India
Sanjay Mavinkere Rangappa
Department of Materials and Production Engineering, The Sirindhorn International Thai-German Graduate School of Engineering, King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand
Suchart Siengchin
Department of Materials and Production Engineering, The Sirindhorn International Thai-German Graduate School of Engineering, King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand

Abstract

-

Article Details

How to Cite
Kushvaha, V., Rangappa, S. M., & Siengchin, S. (2022). Applications of Hybrid Composites in Railway. Applied Science and Engineering Progress, 15(2), 5768. https://doi.org/10.14416/j.asep.2022.02.009
Issue
Vol. 15 No. 2 (2022): Special Issue
Section
Editorial Corner

References

M. Jawaid and S. Siengchin, “Hybrid composites: A versatile materials for future,” Applied Science and Engineering Progress, vol. 12, no. 4, p. 223, 2019, doi: 10.14416/j.asep.2019.09.002.

A. Sharma, Y. Munde, and V. Kushvaha, “Representative volume element based micromechanical modelling of rod shaped glass filled epoxy composites,” SN Applied Sciences, vol. 3, no. 2, pp. 1–10, 2021.

P. Kongkaoroptham, M. Boonpensin, T. Siripongsakul, and P. Promdirek, “Corrosion behaviour of AISI409 stainless steel with al slurry coating in molten salt,” Applied Science and Engineering Progress, vol. 15, no. 1, 2022, Art. no. 3523, doi: 10.14416/j.asep.2021.02.002.

S. M. Senthil and M. B. Kumar, “Effect of tool rotational speed and traverse speed on friction stir welding of 3D-printed polylactic acid material,” Applied Science and Engineering Progress, vol. 15, no. 1, 2022, Art. no. 5403, doi: 10.14416/ j.asep.2021.09.002.

T. G. Y. Gowda, A. Vinod, P. Madhu, V. Kushvaha, S. M. Rangappa, and S. Siengchin, “A new study on flax‐basalt‐carbon fiber reinforced epoxy/ bioepoxy hybrid composites,” Polymer Composites, vol. 42, no. 4, pp. 1891–1900, 2021.

S. Walzer, M. Liewald, N. Simon, J. Gibmeier, H. Erdle, and T. Böhlke, “Improvement of sheet metal properties by inducing residual stresses into sheet metal components by embossing and reforming,” Applied Science and Engineering Progress, vol. 15, no. 1, 2022, Art. no. 5414, doi: 10.14416/j.asep.2021.09.006.

S. Mahesh, M. Chandrasekar, R. Asokan, Y. C. Mouli, K. Sridhar, V. V. K. Vamsi, M. D. Varma, and P. S. Venkatanarayanan, “Influence of incident energy on sisal/epoxy composite subjected to low velocity impact and damage characterization using ultrasonic C-scan,” Applied Science and Engineering Progress, vol. 15, no. 1, 2022, Art. no. 5220, doi: 10.14416/j.asep.2021.07.005.

S. M. Rangappa, S. Siengchin, and H. N. Dhakal, “Green-composites: Ecofriendly and sustainability,” Applied Science and Engineering Progress, vol. 13, no. 3, pp. 183–184, 2020, doi: 10.14416/j.asep.2020.06.001.

M. Ramesh, L. Rajeshkumar, C. Deepa, M. T. Selvan, V. Kushvaha, and M. Asrofi, “Impact of silane treatment on characterization of ipomoea staphylina plant fiber reinforced epoxy composites,” Journal of Natural Fibers, pp. 1–12, 2021, doi: 10.1080/15440478.2021.1902896.

M. Puttegowda, H. Pulikkalparambil, and S. M. Rangappa, “Trends and developments in natural fiber composites,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 543– 552, 2021, doi: 10.14416/j.asep.2021.06.006.

I. O. Oladele, T. F. Omotosho, G. S. Ogunwande, and F. A. Owa, “A review on the philosophies for the advancement of polymer-based composites: Past, present and future perspective,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 553–579, 2021, doi: 10.14416/j.asep.2021.08.003.

M. N. F. Norrrahim, R. A. Ilyas, N. M. Nurazzi, M. S. A. Rani, M. S. N. Atikah, and S. S. Shazleen, “Chemical pretreatment of lignocellulosic biomass for the production of bioproducts: An overview,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 588–605, 2021, doi: 10.14416/j.asep.2021.07.004.

V. Kushvaha, S. A. Kumar, P. Madhushri, and A. Sharma, “Artificial neural network technique to predict dynamic fracture of particulate composite,” Journal of Composite Materials, vol. 54, no. 22, pp. 3099–3108, 2020.

A. Dhandapani, S. Krishnasamy, T. Ungtrakul, S. M. K. Thiagamani, R. Nagarajan, C. Muthukumar, and G. Chinnachamy, “Desirability of triboperformance of natural based thermoset and thermoplastic composites: A concise review,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 606–613, 2021, doi: 10.14416/j.asep. 2021.07.001.

B. D. S. Deeraj, K. Joseph, J. S. Jayan, and A. Saritha, “Dynamic mechanical performance of natural fiber reinforced composites: A brief review,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 614–623, 2021, doi: 10.14416/j.asep.2021.06.003.

K. Setswalo, N. Molaletsa, O. P. Oladijo, E. T. Akinlabi, S. M. Rangappa, and S. Siengchin, “The influence of fiber processing and alkaline treatment on the properties of natural fiber-reinforced composites: A review,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 632– 650, 2021, doi: 10.14416/j.asep.2021.08.005.

B. R. Isanaka, M. A. Akbar, B. P. Mishra, and V. Kushvaha, “Free vibration analysis of thin plates: Bare versus stiffened,” Engineering Research Express, vol. 2, no. 1, 2020, Art. no. 015014.

S. Chuayprakong, J. Chuchat, T. Poruksa, and M. Soccio, “Feasibility of using natural rubber (NR) latex foam as a soft robotic finger: Role of foaming agent in morphology and dynamic properties of NR latex foam,” Applied Science and Engineering Progress, vol. 14, no. 1, pp. 80– 88, 2021, doi: 10.14416/j.asep.2020.12.004.

M. Hemath, S. M. Rangappa, V. Kushvaha, H. N. Dhakal, and S. Siengchin, “A comprehensive review on mechanical, electromagnetic radiation shielding, and thermal conductivity of fibers/ inorganic fillers reinforced hybrid polymer composites,” Polymer Composites, vol. 41, no. 10, pp. 3940–3965, 2020.

A. Dogru, A. Sozen, G. Neser, and M. O. Seydibeyoglu, “Effects of aging and infill pattern on mechanical properties of hemp reinforced PLA composite produced by fused filament fabrication (FFF),” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 651–660, 2021, doi: 10.14416/j.asep. 2021.08.007.

V. Dogra, C. Kishore, A. Verma, A. K. Rana, and A. Gaur, “Fabrication and experimental testing of hybrid composite material having biodegradable bagasse fiber in a modified epoxy resin: Evaluation of mechanical and morphological behavior,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 661–667, 2021, doi: 10.14416/ j.asep.2021.06.002.

A. Vinod, T. Y. Gowda, R. Vijay, S. M. Rangappa, M. K. Gupta, M. Jamil, and S. Siengchin, “Novel muntingia calabura bark fiber reinforced green-epoxy composite: A sustainable and green material for cleaner production,” Journal of Cleaner Production, vol. 294, 2021, Art. no. 126337.

A. C. Özcan, K. Y. Şanlıtürk, G. Genc, and H. Körük, “Investigation of the sound absorption and transmission loss performances of green homogenous and hybrid luffa and jute fiber samples,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 668–679, 2021, doi: 10.14416/j.asep.2021.04.005.

N. A. Nasimudeen, S. Karounamourthy, J. Selvarathinam, S. M. K. Thiagamani, H. Pulikkalparambil, S. Krishnasamy, and C. Muthukumar, “Mechanical, absorption and swelling properties of vinyl ester based natural fibre hybrid composites,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 680– 688, 2021, doi: 10.14416/j.asep.2021.08.006.

P. K. Saha, “Aluminum extrusion research opportunity for future development,” Applied Science and Engineering Progress, vol. 12, no. 1, pp. 1–2, 2019, doi : 10.14416/j.ijast.2019.01.008.

M. E. Hoque, A. M. Rayhan, and S. I. Shaily, “Natural fiber-based green composites: Processing, properties and biomedical applications,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 689–718, 2021, doi: 10.14416/ j.asep.2021.09.005.

C. Santos, T. Santos, M. Aquino, and R. F. L. Zillio, “Statistical study of the influence of fiber content, fiber length and critical length in the mechanical behavior of polymeric composites reinforced with Carica Papaya Fibers (CPFs),” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 719– 726, 2021, doi: 10.14416/j.asep.2021.07.002.

T. P. Sathishkumar, P. Navaneethakrishnan, and P. Maheskumar, “Thermal stability and tribological behaviors of tri-fillers reinforced epoxy hybrid composites,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 727–737, 2021, doi: 10.14416/j.asep.2021.08.002.

A. Sharma, V. C. Khan, G. Balaganesan, and V. Kushvaha, “Performance of nano-filler reinforced composite overwrap system to repair damaged pipelines subjected to quasi-static and impact loading,” Journal of Failure Analysis and Prevention, vol. 20, no. 6, pp. 2017–2028, 2020.

K. N. Bharath, P. Madhu, T. Y. Gowda, S. M. R. Rangappa, V. Kushvaha, and S. Siengchin, “Alkaline effect on characterization of discarded waste of Moringa oleifera fiber as a potential eco-friendly reinforcement for biocomposites,” Journal of Polymers and the Environment, vol. 28, no. 11, pp. 2823–2836, 2020.

A. Kengpol and C. Chanchittakarn, “The influence of vertical centrifugal casting on nickel aluminum bronze alloy for using in the Royal Thai Navy,” Applied Science and Engineering Progress, vol. 14, no. 3, pp. 503–510, 10.14416/j.asep.2020.04.005.

A. Sharma, S. A. Kumar, and V. Kushvaha, “Effect of aspect ratio on dynamic fracture toughness of particulate polymer composite using artificial neural network,” Engineering Fracture Mechanics, vol. 228, 2020, Art. no.106907.

P. E. Dim and M. Termtanun, “Treated clay mineral as adsorbent for the removal of heavy metals from aqueous solution,” Applied Science and Engineering Progress, vol. 14, no. 3, pp. 511–524, 2021, doi: 10.14416/j.asep.2021.04.002.

A. Sharma, P. Madhushri, V. Kushvaha, and A. Kumar, “Prediction of the fracture toughness of silicafilled epoxy composites using K-nearest neighbor (KNN) method,” in 2020 International Conference on Computational Performance Evaluation (ComPE), Jul. 2020, pp. 194–198.

A. Sharma and V. Kushvaha, “Predictive modelling of fracture behaviour in silica-filled polymer composite subjected to impact with varying loading rates using artificial neural network,” Engineering Fracture Mechanics, vol. 239, 2020, Art. no.107328.

V. Kushvaha, S. A Kumar, and P. Madhushri, “Dynamic fracture toughness index: A new integrated methodology for mode-I fracture behaviour of polymer composite under impact loading,” Materials Research Express, vol. 6, no. 11, 2019, Art. no.115342.

V. Kushvaha and H. Tippur, “Effect of filler shape, volume fraction and loading rate on dynamic fracture behavior of glass-filled epoxy,” Composites Part B: Engineering, vol. 64, pp. 126–137, 2014.

V. Kushvaha, A. Branch, and H. Tippur, “Effect of loading rate on dynamic fracture behavior of glass and carbon fiber modified epoxy,” in Dynamic Behavior of Materials, Volume 1. Cham: Springer, 2014, pp. 169–176.

V. Kushvaha and H. Tippur, “Effect of filler particle shape on dynamic fracture behavior of glass-filled epoxy,” in Dynamic Behavior of Materials, Volume 1. New York: Springer, 2013, pp. 513–522.

Z. Liu, J. Wang, V. Kushvaha, S. Poyraz, H. Tippur, S. Park, M. Kim, Y. Liu, J. Bar, H. Chen, and X. Zhang, “Poptube approach for ultrafast carbon nanotube growth,” Chemical Communications, vol. 47, no. 35, pp. 9912–9914, 2011.

P. Potejana and N. Seemuang, “Fabrication of metallic nano pillar arrays on substrate by sputter coating and direct imprinting processes,” Applied Science and Engineering Progress, vol. 14, no. 1, pp. 72–79, 2021, doi: 10.14416/j.asep.2019.09.001.

A. Sharma, T. Mukhopadhyay, S. M. Rangappa, S. Siengchin, and V. Kushvaha, “Advances in computational intelligence of polymer composite materials: Machine learning assisted modeling, analysis and design,” Archives of Computational Methods in Engineering, 2022, doi: 10.1007/ s11831-021-09700-9.

K. Jayappa, V. Kumar, and G. G. Purushotham, “Effect of reinforcements on mechanical properties of nickel alloy hybrid metal matrix composites processed by sand mold technique,” Applied Science and Engineering Progress, vol. 14, no. 1, pp. 44–51, 2021, doi: 10.14416/ j.asep.2020.11.001.

C. Tavichaiyuth, Y. Aue-u-Lan, and T. Hart- Rawung, “Evaluation of forging die defect by considering plastic deformation and abrasive wear in a hot forged axle shaft,” Applied Science and Engineering Progress, vol. 14, no. 1, pp. 60–71, 2021, doi: 10.14416/j.asep.2020.12.005.