Mechanical Characterization of B4C-Gr Al2618 Based Composites Synthesized by Stir Casting Method
Article Sidebar
Main Article Content
Abstract
Aerospace and automotive industries rely heavily on aluminium alloys because of their advantageous physical and mechanical properties. This paper presents studies on the performance of stir cast B4C (Boron carbide) and Gr (graphite) reinforced aluminium metal matrix composite (AMMC). Particulate reinforcement of B4C and Gr is in the ratio 2:1 (wt.%). Characterization of AMMC's mechanical properties reveals that the composite has enhanced mechanical properties compared to Al2618. Through Scanning electron microscope(SEM), it is identified that microstructure of AMMC and distribution of B4C and Gr particles in Al2618 are found to be uniform. Based on the results of the experiments, it was determined that the best AMMC mixture for improving the material's mechanical properties is a combination of B4C and Gr, with the proportions at 8:4. As a result, the automobile sector stands to benefit greatly from the use of this AMMC in the production of engine components.
Article Details
References
B. V. Ramnath, C. Elanchezhian, M. Jaivignesh, S. Rajesh, C. Parswajinan, and A. S. A. Ghias, “Evaluation of mechanical properties of aluminium alloy-alumina-boron carbide metal matrix composites,” Materials and Design, vol. 58, pp. 332–338, 2014.
K. Yu, W. Li, S. Li, and J. Zhao, “Mechanical properties and microstructure of aluminum alloy 2618 with Al3 (Sc, Zr) phases,” Materials Science and Engineering: A, vol. 368, no. 1–2, pp. 88–93, 2004.
V. V. Monikandan, M. A. Joseph, and P. K. Rajendrakumar, “Dry sliding wear studies of aluminum matrix hybrid composites,” Resource- Efficient Technologies, vol. 2, pp. S12–S24, 2016.
B. N. Sharath, C. V. Venkatesh, A. Afzal, M. A. Baig, and A. P. Kumar, “Study on effect of ceramics on dry sliding wear behaviour of Al-Cu-Mg based metal matrix composite at different temperature,” Materials Today: Proceedings, vol. 46, no. 17, pp. 8723–8733, 2021.
A. Yazdani and E. Salahinejad, “Evolution of reinforcement distribution in Al–B4C composites during accumulative roll bonding,” Materials and Design, vol. 32, no. 6, pp. 3137–3142, 2011.
B. N. Sharath and C. V. Venkatesh, “Study on effect of boron carbide, aluminium oxide and graphite on dry sliding wear behaviour of aluminium based metal matrix composite at different temperature,” Tribologia - Finnish Journal of Tribology, vol. 38, no. 1–2, pp. 35–46, 2021.
B. N. Sharath, C. V. Venkatesh, A. Afzal, N. Aslfattahi, A. Aabid, M. Baig, and B. Saleh, “Multi ceramic particles inclusion in the Aluminium matrix and wear characterization through experimental and response surfaceartificial neural networks,” Materials, vol. 14, no. 11, Jan. 2021, Art. no. 2895.
B. N. Sharath, T. P. Jeevan, M. A. Baig, H. S. Ashrith, A. Afzal, and A. R. Reddy, “Machinability studies on boron carbide and graphite reinforced aluminium hybrid composites,” Materials Today: Proceedings, vol. 46, no. 17, pp. 8734–8741, 2021.
S. C. Bergsma, X. Li, and M. E. Kassner, “Effects of thermal processing and copper additions on the mechanical properties of aluminum alloy ingot AA 2618,” Journal of Materials Engineering and Performance, vol. 5, no. 1, pp. 100–102, 1996.
G. Singh and S. Goyal, “Microstructure and mechanical behavior of AA6082-T6/SiC/ B4C-based aluminum hybrid composites,” Particulate Science and Technology, vol. 36, no. 2, pp. 154–161, 2018.
S. Narayan and A. Rajeshkannan, “Hardness, tensile and impact behaviour of hot forged aluminium metal matrix composites,” Journal of Materials Research and Technology, vol. 6, pp. 213–219, 2017.
S. C. Sharma, B. M. Satish, B. M. Girish, R. Kamath, and H. Asanuma, “Dry sliding wear of short glass fiber reinforced zinc-aluminium composites,” Tribolgy International, vol. 31, no. 4, pp. 183–188, 1998.
T. Hariprasad, K. Varatharajan, and S. Ravi, “Wear characteristics of B4C and Al2O3 reinforced with Al 5083 metal matrix based hybrid composite,” Procedia Engineering, vol. 97, pp. 925–929, 2014.
K. Kalaiselvan, N. Murugan, and S. Parameswaran, “Production and characterization of AA6061– B4C stir cast composite,” Materials and Design, vol. 32, no. 7, pp. 4004–4009, 2011.
S. Biswas, E. Dwarakadasa, and S. K. Biswas, “Bearings and wear properties of cast graphite aluminium composites,” in Proceedings of All India Seminar on Aluminium, 1979, pp. 189–196.
U. T. S. Pillai and R. K. Pandey, “Studies on mechanical behaviour of cast and forged Al-Graphite particulate composites,” Journal of Composite Materials, vol. 23, no. 2, Feb. 1989, doi: 10.1177/002199838902300201
S. Prabagaran, G. Chandramohan, and P. Shanmughasundaram, “Influence of B4C on physical and mechanical properties of AA6061- B4C-Gr metal matrix composite,” International Journal of Applied Engineering Research, vol. 9, no. 22, pp. 13193–13201, 2014.
W. D. Callister, “An Introduction,” in Materials Science and Engineering, 2nd ed. New York: John Wiley, 1991, p. 536.