The Study of MgO and/or ZrO2 Modified Al2O3 for CO2 Adsorption
Article Sidebar
Main Article Content
Abstract
Alumina (Al2O3) is widely used as a sorbent in CO2 adsorption and as a catalyst support in CO2 utilization. For this application, the CO2 adsorption ability is the most important property to be improved. Thus, this work presents the idea to modify the surface of a commercial alumina using an Mg-Zr mixed oxide. With this material, sites for CO2 adsorption can be created by generating oxygen mobility property simultaneously with the basicity. To prove this hypothesis, alumina modified with MgO, ZrO2, or Mg-Zr mixed oxide was prepared by an incipient wetness impregnation. The physicochemical properties of the bare alumina and the alumina modified with MgO, ZrO2, or Mg-Zr mixed oxide were investigated using N2 adsorption-desorption and X-ray diffraction. The achievement of oxygen mobility creation was quantitatively evaluated by O2-temperature programmed desorption measurement. The CO2 adsorption performance with the distribution of basic site strength was determined by CO2-temperature programmed desorption measurements. According to the results, the highest oxygen mobility was found in the alumina modified with Mg-Zr mixed oxide, which is approximately 1.7 times that of the bare alumina. The alumina modified with Mg-Zr mixed oxide showed the highest CO2 capacity by approximately 1.4 times compared to the alumina. It is because the cubic ZrO2 stabilized with MgO provided the number of oxygen vacancy sites that can be filled by oxygen atoms in adsorbed CO2 corresponding to the moderate and strong basic sites.
Article Details
References
K. Adler, “Global CO2 emissions to rise by 4.9% in 2021,” 2021. [Online]. Available: https://cleanenergynews.ihsmarkit.com
R. Lindsey, “Climate change: Atmospheric carbon dioxide,” 2020 [Online]. Available: https://www. climate.gov
D. I. Ferrer, Supported Layered Double Hydroxides as CO2 Adsorbents for Sorption-Enhanced H2 Production. Switzerland: Springer International Publishing, May. 2016.
B. Acar, M. S. Başar, B. M. Eropak, B. S. Caglayan, and A. E. Aksoylu, “CO2 adsorption over modified AC samples: A new methodology for determining selectivity,” Catalysis Today, vol. 301, pp. 112– 124, Mar. 2018.
L. Li, N. Zhao, W. Wei, and Y. Sun, “A review of research progress on CO2 capture, storage, and utilization in Chinese Academy of Sciences,” Fuel, vol. 108, pp. 112–130, Jun. 2013.
F. Wang, C. Gunathilake, and M. Jaroniec, “Development of mesoporous magnesium oxidealumina composites for CO2 capture,” Journal of CO2 Utilization, vol. 13, pp. 114–118, Mar. 2016.
B. Acar, M. S. Başar, B. M. Eropak, B. S. Caglayan, and A. E. Aksoylu, “CO2 adsorption over modified AC samples: A new methodology for determining selectivity,” Catalysis Today, vol. 301, pp. 112– 124, Mar. 2018.
E.Takaluoma, T. Pikkarainen, and K. Kemppainen, “Adsorption and desorption of metals onto reusable adsorbent,” 2018. [Online]. Available: http://www.mwen.info
X.Jiao, L. Li, H. Li, F. Xiao, N. Zhao, W. Wei, and B. Zhang, “Influence of preparation parameters on the structural properties and the CO2 capture performance of Mg–Zr solid sorbent,” Materials Research Bulletin, vol. 64, pp. 163–170, Apr. 2015.
P. Tobarameekul, S. Sangsuradet, N. N. Chat, and P. Worathanakul, “Enhancement of CO2 adsorption containing zinc-ion-exchanged zeolite NaA synthesized from rice husk ash,” Applied Science and Engineering Progress, vol. 15, no. 1, Nov. 2022, Art. no. 3640, doi: 10.14416/j.asep. 2020.11.006.
J. Foungchuen, N. Pairin, and C. Phalakornkule, “Impregnation of chitosan onto activated carbon for adsorption selectivity towards CO2: Biohydrogen purification,” KMUTNB: International Journal of Applied Science and Technology, vol. 9, no. 3, pp. 197–209, Apr. 2016, doi: 10.14416/j.ijast. 2016.03.003.
F. Chen, “Aluminum coordination and Lewis acidity in transition aluminas,” Journal of Catalysis, vol. 133, no. 2, pp. 263–278, 1992.
X. Jiao, L. Li, N. Zhao, F. Xiao, and W. Wei, “Synthesis and low-temperature CO2 capture properties of a novel Mg–Zr solid sorbent,” Energy & Fuels, vol. 27, no. 9, pp. 5407–5415, Jul. 2013.
M. Haneda, K. Takamura, Y. Doi, N. Bion, and L. Vivier, “Synthesis of ordered porous zirconia containing sulfate ions and evaluation of its surface acidic properties,” Journal of Materials Science, vol. 52, no. 10, pp. 5835–5845, May 2017.
X. Wang, J. Zhao, Y. Li, S. Huang, J. An, R. Shi, and J. Ren, “Effects of surface acid–base properties of ZrO2 on the direct synthesis of DMC from CO2 and methanol: A combined DFT and experimental study,” Chemical Engineering Science, vol. 229, Jan. 2021, Art. no. 116018.
W. Sumarasingha, S. Supasitmongkol, and M. Phongaksorn, “The effect of ZrO2 as different components of Ni-Based catalysts for CO2 reforming of methane and combined steam and CO2 reforming of methane on catalytic performance with coke formation,” Catalysts, vol. 11, no. 8, Aug. 2021, Art. no. 984.
X. Liu, J. Ding, X. Lin, R. Gao, Z. Li, and W.-L. Dai, “Zr-doped CeO2 nanorods as versatile catalyst in the epoxidation of styrene with tert-butyl hydroperoxide as the oxidant,” Applied Catalysis A: General, vol. 503, pp. 117–123, Aug. 2015.
R. V. Siriwardane, C. Robinson, M. Shen, and T. Simonyi, “Novel regenerable sodium-based sorbents for CO2 capture at warm gas temperatures,” Energy and Fuels, vol. 21, no. 4, pp. 2088–2097, Jul. 2007.
H. Hayashi, J. Taniuchi, N. Furuyashiki, S. Sugiyama, S. Hirano, N. Shigemoto, and T. Nonaka, “Efficient recovery of carbon dioxide from flue gases of coal-fired power plants by cyclic fixed-bed operations over K2CO3-on- Carbon,” Industrial & Engineering Chemistry Research, vol. 37, no. 1, pp. 185–191, Jan. 1998
L. Li, X. Wen, X. Fu, F. Wang, N. Zhao, F. Xiao, W. Wei, and Y. Sun, “MgO/Al2O3 sorbent for CO2 capture,” Energy & Fuels, vol. 24, no. 10, pp. 5773–5780, Oct. 2010.
A. Zukal, J. Pastva, and J. Čejka, “MgO-modified mesoporous silicas impregnated by potassium carbonate for carbon dioxide adsorption,” Microporous and Mesoporous Materials, vol. 167, pp. 44–50, Feb. 2013.
V. Hornebecq, C. Knöfel, P. Boulet, B. Kuchta, and P. L. Llewellyn, “Adsorption of carbon dioxide on mesoporous zirconia: Microcalorimetric measurements, adsorption isotherm modeling, and density functional theory calculations,” The Journal of Physical Chemistry C, vol. 115, no. 20, pp. 10097–10103, May. 2011.
K. Piyapaka, S. Tungkamani, and M. Phongaksorn, “Effect of strong metal support interactions of supported Ni and Ni-Co catalyst on metal dispersion and catalytic activity toward dry methane reforming reaction,” KMUTNB: International Journal of Applied Science and Technology, vol. 9, no. 4, pp. 255–259, Oct. 2016, doi: 10.14416/j.ijast. 2016.10.001.
G. Chavez-Esquivel, J. C. Garcia-Martinez, J. A. De Los Reyes, V. A. Suárez-Toriello, M. A. Vera-Ramirez, and L. Huerta, “The influence of Al2O3 content on Al2O3-ZrO2 composite-textural structural and morphological studies,” Materials Research Express, vol. 6, no. 10, Aug. 2019, Art. no. 105201.
T. Yan, W. Bing, M. Xu, Y. Li, Y. Yang, G.Cui, and M.Wei, “Acid–base sites synergistic catalysis over Mg–Zr–Al mixed metal oxide toward synthesis of diethyl carbonate,” RSC Advances, vol. 8, no. 9, pp. 4695–4702, Aug. 2018.
B. Zen, Z. Pan, L. Shen, D. Zhao, J. Teng, H. Hong, and H. Lin, “Effects of polysaccharides’ molecular structure on membrane fouling and the related mechanisms,” SSRN Electronic Journal, vol. 836, Aug. 2022, Art. no. 155579.
B. Chen, X. Hu, J. Wang, R. Li, L. Shen, Y. Xu, and H. Lin, “Novel catalytic self-cleaning membrane with peroxymonosulfate activation for dual-function wastewater purification: Performance and mechanism,” Journal of Cleaner Production, vol. 355, Jun. 2022, Art. no. 131858.
J. Liu, L. Shen, H. Lin, Z. Huang, H. Hong, and C. Chen, “Preparation of Ni@UiO-66 incorporated polyethersulfone (PES) membrane by magnetic field assisted strategy to improve permeability and photocatalytic self-cleaning ability,” Journal of Colloid and Interface Science, vol. 618, pp. 483–495, Jul. 2022.
Z. Pan, B. Zeng, H. Lin, J. Teng, H. Zhang, H. Hong, and M. Zhang, “Fundamental thermodynamic mechanisms of membrane fouling caused by transparent exopolymer particles (TEP) in water treatment,” SSRN Electronic Journal, vol. 802, no. 10, May 2021, Art. no.153252.
R. Zhang, Y. Xu, L. Shen, R. Li, and H. Lin, “Preparation of Nickel@Polyvinyl alcohol (PVA) conductive membranes to couple a novel electrocoagulation-membrane separation system for efficient oil-water separation,” SSRN Electronic Journal, vol. 653, Jul. 2022, Art. no. 120541.
L. Han, C. Chen, L. Shen, H. Lin, B. Li, Z. Huang, and H. Hong, “Novel membranes with extremely high permeability fabricated by 3D printing and nickel coating for oil/water separation,” Journal of Materials Chemistry A, vol. 10, no. 22, pp. 12055–12061, May. 2022.
S. Gandhi and S. Patel, “Dry reforming of methane over supported nickel catalysts promoted by zerconia, ceria and magnesia,” International Journal of Advanced Research in Engineering and Technology (IJARET), vol. 6, no. 10, pp. 131–146, Oct. 2015.
Zh. Li, Ch. Liu, X. Zhang, W. Wang, B. Wang, and X. Ma, “Effect of ZrO2 on catalyst structure and catalytic sulfur-resistant methanation performance of MoO3/ZrO2–Al2O3 catalysts,” Kinetics and Catalysis, vol. 59, no. 4, pp. 481–488, Aug. 2018.
N. I. Radishevskaya, Y. A. Nazarova, O. V. Lvov, N. G. Kasatsky, and V. D. Kitler, “Synthesis of magnesium aluminate spinel in the MgO-Al2O3- Al system using the SHS method,” Journal of Physics: Conference Series, vol. 1214, Apr. 2019, Art. no. 012019.
M. S. Lanre, A. S. Al-Fatesh, A. H. Fakeeha, S. O. Kasim, A. A. Ibrahim, A. S. Al-Awadi, and A. E. Abasaeed, “Catalytic performance of lanthanum promoted Ni/ZrO2 for carbon dioxide reforming of methane,” Processes, vol. 8, no. 11, Nov. 2020, Art. no. 1502.
X. Jiao, L. Li, N. Zhao, F. Xiao, and W. Wei, “Synthesis and low-temperature CO2 capture properties of a novel Mg-Zr solid sorbent,” Energy & Fuels, vol. 27, no. 9, pp. 5407–5415, Aug. 2013.
Z. Qu, Z. Wang, X. Zhang, and H. Wang, “Role of different coordinated Cu and reactive oxygen species on the highly active Cu–CE–ZR mixed oxides in NH3-SCO: A combined in situ EPR and O2-TPD approach,” Catalysis Science & Technology, vol. 6, no. 12, pp. 4491–4502, Feb. 2016.
W. Liu, L. Li, X. Zhang, Z. Wang, X. Wang, and H. Peng, “Design of Ni-ZrO2@SiO2 catalyst with ultra-high sintering and coking resistance for dry reforming of methane to prepare syngas,” Journal of CO2 Utilization, vol. 27, pp. 297–307, Oct. 2018.
E. I. Kauppi, K. Honkala, A. O. I. Krause, J. M. Kanervo, and L. Lefferts, “ZrO2 Acting as a redox catalyst,” Topics in Catalysis, vol. 59, no. 8–9, pp. 823–832, Apr. 2016
N. Dharmasaroja, T. Ratana, S. Tungkamani, T. Sornchamni, D. S. A. Simakov, and M. Phongaksorn, “CO2 reforming of methane over the growth of hierarchical Ni nanosheets/Al2O3‐MgO synthesized via the ammonia vapour diffusion impregnation,” The Canadian Journal of Chemical Engineering, vol. 99, no. S1, pp. S585–S595, Oct. 2021
A. Smalenskaite, M. M. Kaba, I. Grigoraviciute- Puroniene, L. Mikoliunaite, A. Zarkov, R. Ramanauskas, and A. Kareiva, “Sol–gel synthesis and characterization of coatings of Mg-Al layered double hydroxides,” Materials, vol. 12, no. 22, Nov. 2019, Art. no. 3738.
L. Santamaria, A. Arregi, J. Alvarez, M. Artetxe, M. Amutio, G. Lopez, and M. Olazar, “Performance of a Ni/ZrO2 catalyst in the steam reforming of the volatiles derived from biomass pyrolysis,” Journal of Analytical and Applied Pyrolysis, vol. 136, pp. 222–231, Nov. 2018.
C. Xin, M. Hu, K. Wang, and X. Wang, “Significant enhancement of photocatalytic reduction of CO2 with H2O over ZnO by the formation of basic zinc carbonate,” Langmuir, vol. 33, no. 27, pp. 6667–6676, Jun. 2017.
B. Liu, C. Li, G. Zhang, X. Yao, S. S. C. Chuang, and Z. Li, “Oxygen vacancy promoting dimethyl carbonate synthesis from CO2 and methanol over Zr-doped CeO2 nanorods,” ACS Catalysis, vol. 8, no. 11, pp. 10446–10456, Oct. 2018.
S. Song, J. Wei, X. He, G. Yan, M. Jiao, W. Zeng, and M. Shi, “Oxygen vacancies generated by Sn-doped ZrO2 promoting the synthesis of dimethyl carbonate from methanol and CO2,” RSC Advances, vol. 11, no. 56, pp. 35361–35374, Nov. 2021.
X. Wan, L.Wang, S.Gao, X. Lang, L. Wang, T. Zhang, and W. Wang, “Low-temperature removal of aromatics pollutants via surface labile oxygen over Mn-based mullite catalyst SmMn2O5,” Chemical Engineering Journal, vol. 410, Apr. 2021, Art. no. 128305.
Y. Wang, A. Lafosse, and K. Jacobi, “Adsorption and reaction of CO2 on the RuO2(110) surface,” Surface Science, vol. 481, no. 1–3, pp. 113–118, Jun. 2001.