Modern Applications of Polymer Composites in Structural Industries: A Review of Philosophies, Product Development, and Graphical Applications

Main Article Content

Isiaka Oluwole Oladele
Linus Nnabuike Onuh
Suchart Siengchin
Mavinkere Rangappa Sanjay
Samson Oluwagbenga Adelani

Abstract

Polymer-based materials have been discovered as the most outstanding class of material that is fast displacing other materials in all areas of human needs. The dire need for durable, aesthetic, and lightweight materials has favored the increasing demand for polymer-based materials in structural industries. The application of polymeric-based materials in all aspects of human endeavor is based on their ease of formation, lightweight, and acceptable properties. The philosophy of composite development has also contributed immensely to the production of components from polymer-based materials suitable for several structural applications. More recently, interest in green materials also encourages the use of polymer-based materials in structural applications. The suitability of a material for any selected application is justified by structural and environmental compatibility. Thus, researchers have focused on these two major areas in their investigations for product development. Despite continuous efforts in these two directions, they are still issues of great concern to researchers in satisfying the desires of users presently. Hence, this review presents the philosophies of researchers, the product developed, and areas of application for polymer-based materials in structural industries such as biomedical, building and construction, energy, and sports. The paper advanced graphical presentation of the application of developed products and strongly supports the recommendation of polymer-based composite materials as a viable alternative to other materials due to their remarkable capabilities in many application domains.

Article Details

How to Cite
Oladele, I. O., Onuh, L. N., Siengchin, S., Sanjay, M. R., & Adelani, S. O. (2024). Modern Applications of Polymer Composites in Structural Industries: A Review of Philosophies, Product Development, and Graphical Applications. Applied Science and Engineering Progress, 17(4), 6884. https://doi.org/10.14416/j.asep.2023.07.003
Section
Review Articles

References

I. O. Oladele, T. F. Omotosho, and A. A. Adediran, “Polymer-based composites: an indispensable material for present and future applications,” International Journal of Polymer Science (Hindawi), vol. 2020, 2020, Art. no. 8834518, doi: 10.1155/2020/8834518.

I. O. Oladele, T. F. Omotosho, G. S. Ogunwande, and F. A. Owa, “A review on the philosophies for the advancement of polymer-based composites: Past, present and future perspective,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 553–579, 2021, doi: 10.14416/j. asep.2021.08.003.

V. Chaudhary and F. Ahmad, “A review on plant fiber reinforced thermoset polymers for structural and frictional composites,” Polymer Testing, vol. 91, 2020, Art. no. 106792.

D. K. Rajak, D. D. Pagar, P. L. Menezes, and E. Linul, “Fiber-reinforced polymer composites: Manufacturing, properties, and applications,” Polymers, vol. 11, no. 10, 2019, doi: 10.3390/ polym11101667.

A. G. Koniuszewska and J. W. Kaczmar, “Application of polymer-based composite materials in transportation,” Progress in Rubber, Plastics and Recycling Technology, vol. 32, no. 1, 2016, doi: 10.1177/147776061603200101.

A. J. Fang, “Identification of damage mechanisms in fiber-reinforced polymer-matrix composites with acoustic emission and the challenge of assessing structural integrity and service life,” Construction and Building Materials, vol. 173, pp. 629–637, 2018.

D. Chandramohan, J. Bharanichandar, P. Karthikeyan, R. Vijayan, and B. Murali, “Progress of biomaterials in the field of Orthopedics” American Journal of Applied Sciences, vol. 11, no. 4, p. 623, 2014.

E. Edwards, C. Brantley, P. B. Ruffin, “Overview of nanotechnology in military and aerospace applications,” Nanotechnology Commercialization, pp.133–176, 2017.

W. City, “The application of composite fiber materials in sports equipment” Lei Zhang's Research Works, vol. 1, pp. 450–453, 2015.

S. A. Attaran, A. Hassan, and M. U. Wahit, “Materials for food packaging applications based on bio-based polymer nanocomposites: A review,” Journal of Thermoplastic Composite Materials, vol. 30, no. 2, pp. 143–173, 2015, doi: 10.1177/0892705715588801.

A. Dasari and J. Njuguna, “Polymer Nanocomposites for Food Packaging Applications” Functional and Physical Properties of Polymers, pp. 29–59, 2017, doi: 10.1002/9781118542316.ch3.

C. M. Chang, W. B. Li, X. Guo, B. Guo, C. N. Ye, W. Y. Su, Q. P. Fan, and M. J. Zhang, “A narrow-bandgap donor polymer for highly efficient as-cast non-fullerene polymer solar cells with a high open circuit voltage,” Polymers, vol. 58, pp. 82–87, 2018.

M. Tyagi and D. Tyagi, “Polymer nanocomposites and their applications in electronics industry,” International Journal of Electrical Engineering, vol. 7, no. 6, pp. 603–608, 2014.

J. S. Chohan, K. S. Boparai, R. Singh, and M. S. J. Hashmi, “Manufacturing techniques and applications of polymer matrix composites: A brief review” Advances in Materials and Processing Technologies, vol. 1, pp. 1–11, 2020.

H. Fallahi, F. Taheri-Behrooz, and A. Asadi, “Nonlinear mechanical response of polymer matrix composites: A review” Polymer Reviews, vol. 60, no.1, pp. 42–85, 2020.

S. Begum, S. Fawzia, and M. S. J. Hashmi, “Polymer matrix composite with natural and synthetic fibers” Advances in Materials and Processing, vol. 6, no. 3, pp. 547–564, 2020.

V. Mahesh, S. Joladarashi, and S. M. Kulkarni, “A comprehensive review of material selection for polymer matrix composites subjected to impact load,” Defense Technology, vol. 17, no.1, pp. 257–277, 2021.

C. P. Singh, R. V. Patel, M. F. Hassan, A. Yadav, V. Kumar, and A. Kumar, “Fabrication and evaluation of physical and mechanical properties of jute and coconut coir reinforced polymer matrix composite” Materials Today: Proceedings, vol. 38, pp. 2572–2577, 2021.

I. O. Oladele, A. D. Akinwekomi, O. I. Ibrahim, M. H. Adegun, and S. I. Talabi, “Assessment of impact energy, wear behavior, thermal resistance and water absorption properties of hybrid bagasse Fiber/CaCO3 reinforced polypropylene composites” International Polymer Processing, vol. 36, no. 2, pp. 205–212, 2021.

T. P. Sathishkumar, J. Naveen, and S. Satheeshkum, “Glass fiber reinforced polymer composites: A review” Journal of Reinforced Plastics and Composites, vol. 33, no. 13, pp. 1258–1275, 2012

S. Yao, F. Jin, K. Y. Rhee, D. Hui, and S. Park, “Recent advances in carbon-fiber-reinforced thermoplastic composites: A review” Composites Part B: Engineering, vol. 142, pp. 241–250, 2018.

V. Dhand, G. Mittal, K. Y. Rhee, S. Park, and D. Hull, “A short review on basalt fiber reinforced polymer composites” Composites Part B: Engineering, vol. 73, pp. 166–180, 2015.

I. O. Oladele, M. A. Okoro, J. O. Ajileye, “The effect of natural rubber on the flexural properties of coconut coir (Cocos Nucifera) reinforced red sand composites,” Acta Technica Corviniensis - Bulletin of Engineering, Fascicule, vol. 2, pp. 87–92, 2015.

R. L. Quirino, K. Monroe, C. H. Fleischer, E. Biswas, and M. R. Kessler, “Thermosetting polymers from renewable sources,” Polymer International, vol. 70, no. 2, pp. 167–180, 2021.

S. Kona, L. A. Naidu, A. M. Bahubalendruni, and Raju, “A review on chemical and mechanical properties of natural fiber reinforced polymer composites” International Journal of Performability Engineering, vol. 13, pp. 189–200, 2012.

K. Li and C. W. Macosko, “Can nanoparticle toughen fiber-reinforced thermosetting polymers,” Journal of Materials Science, vol. 54, no. 6, pp. 4471–4483, 2013.

P. Morampudi, K. K. Namala, Y. K. Gajjela, M. Barath, and G. Prudhvl, “Review on glass fiber reinforced polymer composites,” Materials Today: Proceedings, vol. 43, pp. 314–319, 2021.

M. Z. Naser, R. A. Hawileh, and J. A. Abdalla, “Fiber-reinforced polymer composites in strengthening reinforced concrete structures: A critical review,” Engineering Structures, vol. 198, 2019, Art. no. 109542.

A. U. Shah, M. T. H. Sultan, M. Jawaid, F. Cardona, and A. R. A. Talib, “A review on the tensile properties of bamboo fiber reinforced polymer composites,” Bioresources, vol. 11, no.4, pp. 10654–10676, 2016.

H. Ku, H. Wang, N. Pattarachaiyakoop, and M. Trada, “A review on the tensile properties of natural fiber reinforced polymer composites” Composites Part B: Engineering, vol. 42, no. 4, pp. 856–873, 2011.

M. K. Gupta and R. K Srivastava, “Mechanical properties of hybrid fibers-reinforced polymer composite: A review,” Polymer-Plastics Technology and Engineering, vol. 55, no. 6, pp. 626–642, 2016.

U. S. Bongarde and V. D. Shinde, “Review on natural fiber reinforced polymer composites” International Journal of Engineering Science and Innovative Technology, vol. 3, no. 2, pp. 431–436, 2014.

F. Mahir, K. Keya, B. Sarker, K. Nahiun, and R. Khan, “A brief review on natural fiber used as a replacement of synthetic fiber in polymer composites” Materials Engineering Research, vol. 1, pp. 88–99, 2019.

R. Rahman, S. Zhafer, and F. S. Putra, “Tensile properties of natural and synthetic fiber-reinforced polymer composites,” Mechanical and Physical Testing of Biocomposites, Fiber- Reinforced Composites and Hybrid Composites, pp. 81–102, 2019.

M. K. Gupta, M. Ramesh, and S. Thomas, “Effects of hybridization on properties of natural and synthetic fiber-reinforced polymer composites (2001–2020): A review,” Polymer Composites, vol. 42 , no. 10, pp. 4981–5010, 2021.

Y. Liu, Z. Yu, B. Wang, L. Pengyun, J. Zhu, and S. Ma, “Closed-loop chemical recycling of thermosetting polymers and their application: A review” Green Chemistry, vol. 1, pp. 1–15, 2022.

D. K. Rajak, P. H. Wagh, A. Kumar, S. M. Rangappa, S. Siengchin, A. Khan, A. M. Asiri, R. Velmurugan, and N. K. Gupta, “Impact of fiber reinforced polymer composites on structural joints of tubular sections: A review” Thin-Walled Structures, vol. 180, 2022, Art. no. 109967.

J. Josmin and J. Kuruvilla, “Advances in polymer composites: Macro- and microcomposites - State of the Art, new challenges, and opportunities,” in Polymer Composites, S. Thomas, J. Kuruvilla, S. K. Malhotra, K. Goda, and M. S. Sreekala, Eds. New York: Wiley, 2022.

I. O. Oladele, J. A. Omotoyinbo, and M. P. Borisade, “Mechanical properties of Mahogany (swietenia macrophylla) and Araba (ceiba pentandra) dusts reinforced polyester composites,” Leonardo Electronic Journal of Practices and Technologies, vol. 23, pp. 1–18, 2013.

V. Verma, A. K. Pandey, and C. Sharma, “Fatigue behavior of particulate-reinforced polymer composites: A review,” in Advanced Materials and Manufacturing Processes. Florida: CRC Press, 2021, pp. 155–171.

H. T. N. Kuan, M. Y. Tan, Y. Shen, and M. Y. Yahya, “Mechanical properties of particulate organic natural filler-reinforced polymer composite: A review,” Composites and Advanced Materials, vol. 30, pp. 1–30, 2021.

A. S. Mosallam, A. Bayraktar, M. Elmikawi, S. Pul, and S. Adanur, “Polymer composites in construction: An overview,” SOJ Materials Science & Engineering, vol. 2, no. 1, p. 25, 2021.

K. D. C. Emmanuel, H. M. Herath, L. H. Jeewantha, J. A. Epaarachchi, and T. Aravinthan, “Thermomechanical and fire performance of DGEBA-based shape memory polymer composites for constructions” Construction and Building Materials, vol. 303, 2021, Art. no. 12444.

A. Muftoxiddin, S. B.Tursunalievich, X. A. Ogli, G. A. A. Ogli, S. S. S Ogli, and K. K. Q. Qizi, “Prospects for the use of polymer composite fittings in building structures in the republic of Uzbekistan” The American Journal of Engineering and Technology, vol. 3, no. 6, pp. 97–100, 2021.

I. O. Oladele, S. O. Adelani, O. Agbabiaka, and M. Adegun, “Applications and disposal of polymers and polymer composites: A review” European Journal of Advances in Engineering and Technology, vol. 9, no. 3, pp. 65–89, 2022.

H. Abdullah, L. Ramli, I. Ismail, and N. Yusof, “Hydrocarbon sources for the carbon nanotubes production by chemical vapor deposition: A review” Pertanika Journal of Science and Technology, vol. 25, no. 2, pp. 379–396, 2017.

I. O. Oladele, “Development of bone ash and bone particulate reinforced polyester composites for biomedical applications” Leonardo Electronic Journal of Practices and Technologies, vol. 22, pp. 15–26, 2013.

N. I. Agbeboh, I. O. Oladele, O. O. Daramola, A. A. Adediran, O. O. Olasukanmi, and M. O. Tanimola, “Environmentally sustainable processes for the synthesis of hydroxyapatite” Heliyon, vol. 6, 2020, Art. no. e03765, doi: 10.1016/j. heliyon.2020.e03765.

J. A. Puertolas and S. M. Kurtz, “UHMWPE Matrix Composites” in UHMWPE Biomaterials Handbook, 3rd ed. New York: William Andrew, 2016, pp. 369–397.

H. Lu and T. J. Webster, “Mechanical properties of dispersed ceramic nanoparticles in polymer composites for orthopedic applications” International Journal of Nanomedicine, vol. 5, p. 299, 2020.

S. Krishnakumar and T. Senthikvelan, “Polymer composites in dentistry and orthopedic applications: A review,” Materials Today: Proceedings, vol. 46, pp. 9707–9713, 2021.

S. Ramakrishna and J. Mayer, “Wintermantel and L. K. Leong, “Biomedical applications of polymer-composite materials: A review” Composites Science and Technology, vol. 61, pp. 1189–1224, 2001.

S. Affatato, A. Ruggiero, and M. Merola, “Advanced biomaterials in hip joint arthroplasty. A review on polymer ceramics composites as alternative bearings,” Composites Part B: Engineering, vol. 83, pp. 276–283, 2015.

I. O. Oladele, L. N. Onuh, A. S. Taiwo, S. G. Borisade, N. I. Agbeboh, and S. S. Lephuthing, “Mechanical, wear and thermal conductivity characteristics of snail shell-derived hydroxyapatite reinforced epoxy bio-composites for adhesive biomaterials applications,” International Journal of Sustainable Engineering, vol. 15, no. 1, pp. 125–137, 2022.

C. Hayes, “Layers of polymer material build into a battery stack. Electronics weekly,” 2022. [Online]. Available: https://www.electronics weekly.com/market-sectors/power/layers-poly¬mer-material-build-battery-stack-2019-01/

M. Haneef, J. F. Rahman, M. Yunus, S. Zameer, S. Patil, and T. Yezdani, “Hybrid polymer matrix composites for biomedical applications,” International Journal of Modern Engineering Research (IJMER), vol. 3, no. 2, pp. 970–979, 2013.

J. F. Mano, R. A. Sousa, L. F. Boesel, N. M. Neves, and R. L. Reis, “Bioinert, biodegradable and injectable polymeric matrix composite for hard tissue replacement: State of art and recent developments,” Composites Science and Technology, vol. 64, no. 6, pp. 789–817, 2004.

R. Filippi, E. P. Tomas, A. Papageorgiou, and P. Bright, “A role for the cerebellum in the control of verbal interference: Comparison of bilingual and monolingual adults,” PLOS ONE, vol. 15, pp. 1–13, 2020, doi: 10.1371/journal.pone. 0231288.

P. K. Bajpai, I. Singh, and J. Madaan, “Development and characterization of PLA-based green composites: A review,” Journal of Thermoplastic Composite Materials, vol. 27, no. 1, pp. 52–81, 2014. doi: 10.1177/0892705712439571.

C. Liao and Y. Li, “Polyetheretherketone and its composites for bone replacement and regeneration,” Polymers, vol. 12, no. 12, p. 2858, 2020.

K. Fujihara, Z. Huang, S. Ramakrishna, K. Satknanantham, and H. Hamada, “Feasibility of knitted carbon/PEEK composites for orthopedic bone plates,” Biomaterials, vol. 25, no.17, pp. 3877–3885, 2004.

K. Gulati, M. K. Meher, and K. M. Poluri, “Glycosaminoglycan-based resorbable polymer composites in tissue refurbishment,” Regenerative Medicine, vol. 12, no. 4, pp. 431–457, 2017.

T. J. Lehtonen, J. U. Tuominen, and E. Hiekkanen, “Resorbable composites with bioresorbable glass fibers for load-bearing applications. In vitro degradation and degradation mechanism,” Acta Biomaterials, vol. 9, no.1, pp. 4868–4877, 2013.

I. Ahmed, I. A. Jones, A. J. Parsons, J. Bernard, J. Farmer, C. A. Scotchford, G. S. Walker, and C. D. Rudd, “Composites for bone repair: Phosphate glass fiber reinforced PLA with varying fiber architecture” Journal of Materials Science: Materials in Medicine, vol. 22, no. 8, pp. 1825–1834, 2011.

E. Benham and M. McDaniel, “Polyethylene, high density” in Kirk-Othmer Encyclopedia of Chemical Technology. New York: Willey, 2005.

D. Kohn and Paul Ducheyne, “Materials for bone and joint replacement” in Materials Science and Technology. New York: Willey, 2006.

T. G. Y. Gowda, S. M. Rangappa, K. S. Bhat, P. Madhu, P. Senthamaraikannan, and B. Yogesha, “Polymer matrix-natural fiber composites: An overview,” Cogent Engineering, vol. 5, no. 1, 2018, Art. no. 1446667.

S. L. Phoenix, “Modeling the statistical lifetime of glass fiber/polymer matrix composites in tension,” Composite Structures, vol. 48, no. 1–3, pp. 19–29, 2000.

W. Jung, “Seismic retrofitting strategies of semi-rigid steel frames using polymer matrix composite materials,” Ph.D. dissertation, Department of Civil, Structural and Environmental Engineering, Faculty of the Graduate School of State, University of New York at Buffalo, New York, USA, 2006.

J. Szolomicki and H. Golasz-Szolomicka, “Technological advances and trends in modern high-rise buildings,” Buildings, vol. 9, p. 193, 2019.

P. Zhuo, S. Li, I. A. Ashcroft, and A. I. Jones, “Material extrusion additive manufacturing of continuous fiber reinforced polymer matrix composites: A review and outlook,” Composites Part B: Engineering, vol. 224, p. 109143, 2022.

L. C. Hollaway, “The evolution of and the way forward for advanced polymer composites in the civil infrastructure,” Construction and Building Materials, vol. 17, pp. 365–378, 2003.

Fibo Intercon, “Tunnel engineering and tunnel lining,” 2022. [Online]. Available: https:// fibointercon.com/tunnel-linings/

C. E. Bakis, L. C. Bank, V. L. Brown, E. Cosenza, J. F. Davalos, J. J. Lesko, A. Machida, S. H. Rizkalla, and T. C. Triantafillou, “Fiber-reinforced polymer composites for construction – state of-the-art review,” ASCE Journal of Composite for Construction, vol. 6, no. 2, pp. 73–87, 2022.

C. Deniaud and J. J. R. Cheng, “Review of shear design methods for reinforced concrete beams strengthened with fibre reinforced polymer sheets” Canadian Journal of Civil Engineering, vol. 28, pp. 271–281, 2001.

A. Bousselham and O. Chaallal, “Shear strengthening reinforced concrete beams with fiber-reinforced polymer: Assessment of influencing parameters and required research,” ACI Structural Journal, vol. 101, no. 2, pp. 219– 227, 2004.

A. Borri, P. Casadei, G. Castori, and J. Hammond, “Strengthening of brick masonry arches with externally bonded steel reinforced composites,” Journal of Composites for Construction, vol. 13, no. 6, pp. 468–475, 2009.

M. Pinto, V. B. Chalivendra, Y. K. Kim, and A. F. Lewis, “Improving the strength and service life of jute/epoxy laminar composites for structural applications,” Composite Structures, vol. 156, pp. 333–337, 2016.

A. Al-Fatlawi, K. Jarmai, and G. Kovacs, “Optimal design of a fiber-reinforced plastic composite sandwich structure for the base plate of aircraft pallets in order to reduce weight,” Polymers, vol. 13, no. 5, p. 834, 2021.

D. K. Rajak, P. H. Wagh, and E. Linul, “A review on synthetic fibers for polymer matrix composites: Performance, failure modes and applications,” Materials, vol. 15, no.14, p. 4790, 2022.

F. Fang, Y. Bai, W. Liu, Y. Qi, and J. Wang, “Connections and structural applications of fiber reinforced polymer composites for civil infrastructure in aggressive environments,” Composites Part B: Engineering, vol. 164, pp. 129–143, 2019.

S. S. Pendhari, T. Kant, and Y. M. Desai, “Application of polymer composites in civil construction: A general review” Composite Structures, vol. 84, pp. 114–124, 2007.

C. Benson, “Plastic Innovation developing performance injection molded bike frames,” 2017, [Online]. Available: https://bikerumor.com/ plastic-innovation-developing-performance-injection-molded-bike-frames/

M. R. Kessier, “Polymer matrix composites: A perspective for a special issue of polymer reviews,” Polymer Reviews, vol. 52, no. 3, pp. 229–233, 2012.

A. G. Koniuszewska and J. W. Kaczmar, “Application of polymer-based materials in transportation” Progress in Rubber Plastics and Recycling Technology, vol. 32, no. 1, pp. 1–24, 2016.

S. Surfs, “Sustainable cooperation between Samara surf and composites evolution: Eco-friendly surfboard created from biotex flax fabric and entropy resin,” 2012, [Online]. Available: http://www.netcomposites.com/news/biotex-flax-fabric-from-composites-evolution-used-to-create-eco-friendly-surfboard/7521

A. Jacob, “Kayak paddles feature carbon fiber recycled from aircraft production” 2012. [Online]. Available: https://www.reinforcedplastics.com/ content/news/kayak-paddles-feature-carbon-fibre-recycled-from-aircraft-production/

University of York, “Polymers in sports protection equipment” 2021. [Online]. Available: https://www.futurelearn.com/info/courses/ everyday-chemistry/0/steps/22346

D. Bajwa, C. Ulven, C. Ahlen, and J. Helphrey, “Application of composites in sporting goods,” 2019. [Online]. Available: https://slideplayer. com/slide/14540221/

B. K. Sovacool, “National context derives concerns” Natural Energy, vol. 3, pp. 820–821, 2018.

S. Quirin, T. Jeff, S. Tony, W. Alexandra, and M. Oliver, “Energy alternatives: Electricity without carbon,” Nature, vol. 454, pp. 816–823, 2008.

M. M. Lee, J. Teeuscher, T. Miyasaka, T. N. Murakami, and H. J. Snaith, “Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites” Science, vol. 338, pp. 643–647, 2012.

J. Wei, H. Li, Y. C. Zhao, W. K. Zhou, R. Fu, Y. Leprince-Wang, D. P. Yu, and Q. Zhao, “Suppressed hysteresis and improved stability in perovskite solar cells with conductive organic network” Nano Energy, vol. 26, pp. 139–147, 2016.

C. L. Gao, H. Z. Dong, X. C. Bao, Y. C. Zhang, A. Saparbaev, L. Y. Yu, S. G. Wen, R. Q. Yang, and L. F. Dong, “Additive engineering to improve efficiency and stability of inverted planar perovskite solar cells” Journal of Materials Chemistry C, vol. 6, pp. 8234–8241, 2018.

E. Senokos, Y. Ou, and J. J. Torres, “Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves,” Scientific Report, vol. 8, p. 3407, 2018.

Q. Wang, W. Chen, W. Zhu , D. J. McClements, and X. Liu, “A review of multilayer and composite films and coatings for active biodegradable packaging” Npj Science of Food, vol. 6, p. 18, 2022.

P. Baade and V. Wood, “Ultra-high throughput manufacturing method for composite solid-state electrolytes” Iscience, vol. 24, p.19, 2021.

C. P. Lee, C. A. Lin, T. C. Wei, M. L. Tsai, Y. Meng, C. T. Li, K. C. Huo, C. I. Wu, S. P. Lau, and J. H. He, “Economical low-light photovoltaics by using the Pt-free dye-sensitized solar cell with graphene dot/PEDOT:PSS counter electrodes” Nano Energy, vol. 18, pp. 109–117, 2015.

Q. Qin and R. Zhang, “A novel conical structure of polyaniline nanotubes synthesized on ITO-PET conducting substrate by electrochemical method,” Electrochimica Acta, vol. 89, pp. 726–731, 2013.

S. A. Agarkar, V. V. Dhas, S. Muduli, and S. B. Ogale, “Dye-sensitized solar cell (DSSC) by a novel fully room temperature process: A solar paint for smart windows and flexible substrates” RSC Advances, vol. 2, pp. 11645– 11649, 2012.

D. Carlsson, G. Nystršm, N. Ferraz, L. Nyholm, A. Mihranyan, and M. Strømme, “Development of nanocellulose/polypyrrole composites towards blood purification,” Procedia Engineering, vol. 44. pp. 733–736, 2012, doi: 10.1016/j.proeng.2012.08.550.

W. Hou, Y. Xiao, G. Han, and J. Lin, “The applications of polymers in solar cells: A review” Polymers, pp. 1 – 46, 2019.

H. Caliendo, “PET and PEN ship-in-a-bottle design lets plastics replace glass. Plastics today,” 2013. [Online]. Available: https://www. plasticstoday.com/pet-and-pen-ship-bottle-design-lets-plastics-replace-glass

S. A. Hayes, W. Zhang, M. Branthwaite, and F. R. Jones, “Self-healing of damage in fiber reinforced polymer-matrix composites,” Journal of the Royal Society Interface, vol. 4, no. 13, pp. 382–387, 2007.

A. F. Alabtah, F. Mahdi, and F. F. Eliyan, “External corrosion behavior of steel/gfrp composite pipes in harsh conditions,” Composite Structures, vol. 276, 2021, Art. no. 114595.

S. G. Maxineasa, D. N. Isopescu, I. S. Entuc, N. Taranu, L. M. Lupu, and I. Hudisteanu, “Different carbon and glass fiber reinforced polymer shear strengthening solutions of linear reinforced concrete elements,” Bulletin of Transilvania University of Bravos, vol. 11, no.1, pp. 108–115, 2021.

A. C. de Leon, I. G. M. da Silva, K. D. Pangilinan, Q. Chen, and E. B. Caldona, “High-performance polymers for oil and gas applications,” Reactive and Functional Polymers, vol. 162, 2021, Art. no. 104878.

L. Luke, E. Hector, B. Mike, “Time-dependent reliability analysis of frp rehabilitated pipes,” Journal of Composites for Construction, vol. 14, 2010, doi: 10.1061/(ASCE)CC.1943-5614. 0000075.

D. Kong, X. Huang, M. Xin, G. Xian, “Effects of defect dimensions and putty properties on the burst performances of steel pipes wrapped with CFRP composites” International Journal of Pressure Vessels and Piping, vol.186, 2020, Art. no. 104139.

C. V. Amaechi, C. Cole, O. B. Harrison, G. Nathaniel, W. Chunguang, A. J. Idris, A. R. Ahmed, and C. O. Agbomerie, “Review of composite marine risers for deep-water applications: Design, development and mechanics” Journal of Composites Science, vol. 6, no. 3, p. 96, 2023.

M. P. Kruijer, L. L. Warnet, and R. Akkerman, “Analysis of the mechanical properties of a reinforced thermoplastic pipe (RTP)” Composites Part A: Applied Science and Manufacturing, vol. 36, no. 2, pp. 291–300, 2005.

S. Panthapulakkal and M. Sain, “Injection-molded short hemp fiber/glass fiber reinforced polypropylene hybrid composites-mechanical, water absorption and thermal properties,” Journal of Applied Polymer Science, vol. 103, no. 4, pp. 2432–2441, 2007.

A. B. M. Supian, S. M. Sapuan, M. Y. M. Zuhri, E. S. Zainudin, and H. H. Ya, “Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review” Defence Technology, vol. 14, no. 4, pp. 291–305, 2018.

S. Gowid, E. Mahdi, and F. Alabtah “Modeling and optimization of the crushing behavior and energy absorption of plain weave composite hexagonal quadruple ring systems using artificial neural network,” Composite Structure, vol. 1, pp. 1–19, 2019.

M. P. Illa, M. Khandelwal, and C. S. Sharma, “Bacterial cellulose-derived carbon nanofbers as anode for lithium-ion batteries,” Emergent Materials, vol. 1, pp. 105–120, 2018, doi: 10.1007/s42247-018-0012-2.

M. P. Illa, A. D. Pathak, C. S. Sharma, and M. Khandelwal, “Bacterial cellulose– polyaniline composite derived hierarchical nitrogen-doped porous carbon nanofibers as anode for high-rate lithium-ion batteries,” ACS Applied Energy Materials, vol. 3, pp. 8676–8687, 2020.

D. A. Gregory, L. Tripathi, A. T. R. Fricker, E. Asare, I. Orlando, V. Ragavendran, and I. Roy, “Bacterial cellulose: A smart biomaterial with diverse applications,” Materials Science and Engineering, R Report, vol. 145, p. 100623, 2021.

L. Ma, Z. Bi, Y. Xue, W. Zhang, Q. Huang, L. Zhang, and Y. Huang, “Bacterial cellulose: An encouraging eco-friendly nano-candidate for energy storage and energy conversion,” Journal of Materials Chemistry A, vol. 8, pp. 5812–5842, 2020.

Y. Huang, M. Zheng, Z. Lin, B. Zhao, S. Zhang, J. Yang, C. Zhu, H. Zhang, D. Sun, and Y. Shi, “Flexible cathodes and multifunctional interlayers based on carbonized bacterial cellulose for high-performance lithium–sulfur batteries,” Journal of Materials Chemistry A, vol. 3, pp. 10910–10918, 2015.

H. Tang, Q. Weng, and Z. Tang, “Chitosan oligosaccharides: A novel and efficient water soluble binder for lithium zinc titanate anode in lithium-ion batteries,” Electrochimica Acta, vol. 151, pp. 27–34, 2015.

Q. Li, N. Mahmood, J. Zhu, Y. Hou, and S. Sun, “Graphene and its composites with nanoparticles for electrochemical energy applications,” Nano Today, vol. 9, pp. 668–683, 2014.

R. Singh and H. W. Rhee, “The rise of bio-inspired energy devices,” Energy Storage Materials, vol. 23, pp. 390–408, 2019.

P. Tammela, Z. Wang, S. Frykstrand, P. Zhang, I. M. Sintorn, L. Nyholm, and M. Strømme, “Asymmetric supercapacitors based on carbon nanofbre and polypyrrole/nanocellulose composite electrodes,” RSC Advances, vol. 5, pp. 16405–16413, 2015.

M. G. Hosseini and E. Shahryari, “A novel high-performance supercapacitor based on chitosan/graphene oxide MWCNT/ polyaniline,” Journal Colloid Interface Science, vol. 496, pp. 371–381, 2017.

H. Zhang, X. Wang, and Y. Liang, “Preparation and characterization of a lithium-ion battery separator from cellulose nanofibers,” Heliyon, vol. 1, p. 00032, 2015, doi: 10.1016/j.heliyon. 2015.e00032.

H. J. Salavagione, A. M. Díez-Pascual, E. Lázaro, S. Vera, and M. A. Gómez-Fatou “Chemical sensors based on polymer composites with carbon nanotubes and graphene: The role of the polymer,” Materials Chemistry A, vol. 2, pp. 14289–14328, 2014.

K. Turcheniuk, R. Boukherroub, and S. Szunerits, “Gold-graphine nanocomposite for sensing and biomedical applications,” Journal Material Chemistry B, vol. 3, pp. 4301–4324, 2015.

T. Yang, M. Chen, Q. Kong, X. Wang, X. Guo, W. Li, and K. Jiao, “Shape-Controllable ZnO nanostructure based on synchronously electrochemically reduced graphene oxide and their morphology-dependent electrochemical performance,” Electrochimica Acta, vol. 182, pp. 1037–1045, 2015.

M. Zhang, Y. Li, Z. Su, and G. Wei, “Recent advances in the synthesis and applications of graphene-polymer nanocomposites” Polymer Chemistry, vol. 6, pp. 6107–6124, 2015.

Q. He, S. Wu, Z. Yin, and H. Zhang, ‘‘Graphene- Based electronic sensors,’’ Chemical Science, vol. 3, pp. 1764–1772, 2012.

P. Zhang, X. Zhao, Y. Ji, Z. Ouyang, X. Wen, J. Li, G. Wei, and Z. Su, “Electrospinning graphene quantum dots into a nanofibrous membrane for dual-purpose fluoresce,nt and electrochemical biosensors,” Journal of Materials Chemistry B, vol. 3, pp. 2487–2496, 2015.

Q. Xi, X. Chen, D. G. Evans, and W. Yang. “Gold nanoparticle-embedded porous graphene thin fils fabricated via layer-by-layer self-assembly and subsequent thermal annealing for electrochemical sensing,” Langmuir, vol. 28, pp. 9885–9892, 2012.

P. Zhang, X. Zhang, S. Zhang, X. Lu, Q. Li, Z. Su, and G. Wei, “One-pot green synthesis, “characterizations, and biosensor application of self-assembled reduced graphene oxide-gold nanoparticle hybrid membranes,” Journal Materials Chemistry B, vol. 1, pp. 6525–6531, 2013.

X. Yu, W. Zhang, P. Zhang, and Z. Su, “Fabrication technologies and sensing applications of graphene-based composite films: Advances and challenges,” Biosensors and Bioelectronics, vol. 1. pp. 1–13, 2016, doi: 10.1016/j.bios. 2016.01.081i.

S. Demiroglu, V. Singaravelu, M. O. Seydibeyoglu, M. Misra, and A. K. Mohanty, “The use of nanotechnology for fiber-reinforced polymer composites,” Fiber Technology for Fiber- Reinforced Composites, vol. 1 pp. 277–297, 2017.

N. Saba, P. M. Tahir, and M. A. Jawaid, “Review on potentiality of nano filler/natural fiber filled polymer hybrid composites,” Polymers, vol. 6, pp. 2247–2273, 2014.

D. R. Paul and L. M. Roberson “Polymer nanotechnology: Nanocomposites,” Polymer, vol. 49, pp. 3187–3204, 2008.

M. Carmen, G. Henríquez, A. Mauricio, S. Vallejos, and A. Hernandez, “Polymers for additive manufacturing and 4D-printing: Materials methodologies, and biomedical applications,” Progress in Polymer Science, vol. 94, pp. 57–116, 2019.

H. Mattila, Textiles and Fashion Materials, Design, and Technology. Sawston, UK: Woodhead Publishing, pp. 355–376, 2015.

S. K. Prajapati, G. Mishra, A. Malaiya, and P. Kesharwani, “Application of coatings with smart functions,” Mini-Reviews in Organic Chemistry, vol. 18, no. 17, pp. 1–18, 2021.

B. Daniel and T. Anne-Marie, “Environmental assessment of additive manufacturing in the automotive industry,” Journal of Cleaner Production, vol. 1, p. 226, 2019, doi: 10.1016/j. jclepro.2019.04.086.

S. D. Nath and S. Nilufar, “An overview of additive manufacturing of polymers and associated composites,” Polymers, vol. 12, p. 2719, 2020.

J. M. Jafferson and D. Chatterjee, “A review on polymeric materials in additive manufacturing,” Materials Today: Proceedings, vol. 46, no. 3–4, p. 485, 2020, doi: 10.1016/j.matpr.2021.02.4 85.

M. Mehrpouya, A. Dehghanghadikolaei, B. Fotovvati, A. Vosooghnia, S. S. Emamian, and A. Gisario, “The potential of additive manufacturing in the smart factory industrial 4.0: A review,” Applied Sciences, vol. 9, p. 3865, 2021, doi: 10.3390/app9183865.

S. Alghamdi, S. John, R. Choudhury, and N. K. Dutta, “Additive manufacturing of polymer materials: Progress, promise and challenges,” Polymers, vol. 13, p. 753, 2021.

D. Ortiz-Acosta, T. Moore, D. J. Safarik, K. M. Hubbard, and M. Janicke, “3D-printed silicone materials with hydrogen getter capability,” Advanced Functional Materials, vol. 28, p. 1707285, 2018.

M. E. Grigore, “Methods of recycling, properties, and applications of recycled thermoplastic polymers,” Recycling, vol. 2, no. 24, pp. 1–11, 2017.

Z. Gong, Z. Xiang, X. O. Yang, J. Zhang, N. Lau, J. Zhou, and C. C. Chan, “Wearable fiber optic technology based on smart textile: A review,” Materials, vol. 12, p. 3311, 2019.

A. B. Nair and R. Joseph, “Eco-friendly biocomposites using natural rubber (NR) matrices and natural fiber reinforcements,” in Chemistry, Manufacture and Applications of Natural Rubber. Sawston, UK : Woodhead Publishing, 2014.

E. Omrani, P. L. Menezes, and P. K. Rohatgi, “State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world,” Engineering Science and Technology, an International Journal, vol. 19, pp. 717–736, 2016.

W. Ouarhim, N. Zari, R. Bouhfid, and A. Qaiss, “Mechanical performance of natural fibers based thermosetting composites. In Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites, and Hybrid Composites,” Sawston, UK: Woodhead Publishing, pp. 43–60, 2019.

M. Saxena, A. Pappu, R. Haque, and A. Sharma, “Sisal fiber-based polymer composites and their applications,” in Cellulose Fibers: Bio-and Nano-Polymer Composites. Berlin/Heidelberg: Germany Springer, pp. 589–659, 2011.

C. W. Chin and B. F. Yousif, “Potential of kenaf fibers as reinforcement for tribological applications,” Wear, vol. 267, pp. 1550–1557, 2009.

K. Huang, L. Q. N. Tran, U. Kureemun, W. S. Teo, and H. P. Lee, “Vibroacoustic behavior and noise control of flax fiber-reinforced polypropylene composites,” Journal Natural Fibers, vol. 16, pp. 729–743, 2019.

S. Goutianos, T. Peijs, B. Nystrom, and M. Skrifvars, “Development of flax fiber based textile reinforcements for composite applications,” Applied Composite Materials, vol. 13, pp.199–215, 2009.

D. Chen, C. Pi, M. Chen, L. He, F. Xia, and S. Peng, “Amplitude-dependent damping properties of ramie fiber-reinforced thermoplastic composites with varying fiber content,” Polymer Composite, vol. 40, pp. 2681–2689, 2019.

Y. Du, N. Yan, and M. T. Kortschot, “The use of ramie fibers as reinforcements in composites,” in Biofiber Reinforced Composite Materials, pp. 104–137, 2015.

J. A. Khan and M. A. Khan, “The use of jute fibers as reinforcements in composites,” in Biofiber Reinforced Composite Materials, O. Faruk, and M. Sain, Eds. Sawston, UK: Woodhead Publishing, 2015, pp. 3–34.

R. Al-Mahaidi and R. Kalfat, “Fiber-reinforced polymers and their use in structural rehabilitation,” in Rehabilitation of Concrete Structures with Fiber-Reinforced Polymer, Amsterdam, The Netherlands: Elsevier Science, pp. 15–20, 2018.

E. Linul and L. Marsavina, “Prediction of fracture toughness for open cell polyurethane foams by finite element micromechanical analysis,” Iran Polymer Journal, vol. 20, pp. 736–746, 2012.

E. Linul and L. Marsavina “Assessment of sandwich beams with rigid polyurethane foam core using failure-mode maps,” Proceedings of the Romanian Academy - Series A, vol. 16, pp. 522–530, 2015.

D. K. Rajak, N. N. Mahajan, and E. Linul, “Crashworthiness performance and microstructural characteristics of foam-filled thin-walled tubes under diverse strain rate,” Journal of Alloyed Compound, vol. 775, pp. 675–689, 2019.

L. Marsavina, D. M. Constantinescu, E. Linul, T. Voiconi, D. A. Apostol, and T. Sadowski, “Evaluation of mixed mode fracture for PUR foams,” Procedure Material Science, vol. 3, pp. 1342–1352, 2013.

E. Linul, D. A. Serban, T. Voiconi, L. Marsavina, and T. Sadowski, “Energy absorption and efficiency diagrams of rigid PUR foams” Key Engineering Materials, vol. 601, pp. 246–249, 2016.

D. Muhammad and M. Asaduzzaman, “Friction and wear of polymer and composites,” Composites and Their Properties. London, UK: IntechOpen, 2012, doi: 10.5772/48246.

Y. Liu, Y. Ma, J. Yu, J. Zhuang, S. Wu, and J. Tong, “Development and characterization of alkali-treated abaca fiber reinforced friction composites,” Composite Interface, vol. 26, pp. 67–82, 2019.

M. N. Habeeb and A. F, Ashour, “Flexural behavior of continuous GFRP reinforced concrete beams,” Journal Composite for Construction, vol. 12, pp. 115–124, 2012.

F. Abed, H. El-Chabib, and M. AlHamaydeh, “Shear characteristics of GFRP-reinforced concrete deep beams without web reinforcement,” Journal of Reinforced Plastic Composite, vol. 31, pp. 1063–1073, 2012.

M. M. Rafi, A. Nadjai, and F. Ali, “Experimental testing of concrete beams reinforced with carbon FRP,” Journal of Composite Material, vol. 41, pp. 2657–2673, 2007.

M. A. Rashid, M. A. Mansur, and P. Paramasivam, “Behavior of aramid fiber-reinforced polymer reinforced high strength concrete beams under bending,” Journal of Composite for Construction, vol. 9, pp. 117–127, 2005.

A. Altalmas, A. El Refai, and F. Abed, “Bond degradation of basalt fiber-reinforced polymer (BFRP) bars exposed to accelerated aging conditions,” Construction and Building Materials, vol. 81, pp. 162–171, 2005.

A. Al-tamimi, F. H. Abed, and A. Al-rahmani, “Effects of harsh environmental exposures on the bond capacity between concrete and GFRP reinforcing bars,” Advances in Concrete Construction, vol. 2, pp. 1–11, 2014.

A. El Refai, F. Abed, and A. Altalmas, “Bond durability of basalt fiber-reinforced polymer bars embedded in concrete under direct pullout conditions,” Journal of Composite for Construction, vol. 19, pp. 1–11, 2014.

J. R. Correia, “Pultrusion of advanced fiber-reinforced polymer (FRP) composites,” in Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications. Sawston, UK: Woodhead Publishing, pp. 207– 251, 2013.

J. I. Singh, S. Singh, and V. Dhawan, “Effect of curing temperature on mechanical properties of natural fiber reinforced polymer composites,” Journal Natural Fibers, vol. 15, pp. 687–696, 2017.

S. C. Joshi, “The pultrusion process for polymer matrix composites,” in Manufacturing Techniques for Polymer Matrix Composites (PMCs). Sawston, UK: Woodhead Publishing, pp. 381–413, 2012.

H. Toutanji and Y. Deng, “Comparison between organic and inorganic matrices for RC beams strengthened with carbon fiber sheets,” Journal of Composite for Construction, vol. 11, pp. 507–513, 2015.

C. Menna, D. Asprone, C. Ferone, F. Colangelo, A. Balsamo, A. Prota, R. Cioffi, and G. Manfredi, “Use of geopolymers for composite external reinforcement of RC members,” Composite Part. B-Engineering, vol. 45, pp. 1667–1676, 2013.

T. Trapko, “The effect of high temperature on the performance of CFRP and FRCM confined concrete elements,” Composite Part. B-Engineering, vol. 54, pp. 138–145, 2013.

K. Wang, B. Young, and S. T. Smith, “Mechanical properties of pultruded carbon fiber-reinforced polymer (CFRP) plates at elevated temperatures,” Engineering Structures, vol. 33, pp. 2154–2161, 2011.

Z. Ding, J. G. Dai, and S. Munir, “Study on an improved phosphate cement binder for the development of fiber-reinforced inorganic polymer composites,” Polymers, vol. 6, pp. 2819–2831, 2014.

Y. Fang, P. Cui, Z. Ding, and J. X. Zhu, “Properties of a magnesium phosphate cement-based fire-retardant coating containing glass fiber or glass fiber powder,” Construction and Building Materials, vol. 162, pp. 553–560, 2018.

J. G. Dai, S. Munir, and Z. Ding, “Comparative study of different cement-based inorganic pastes towards the development of FRIP strengthening technology,” Journal of Composite for Construction, vol. 18, p. 4013011, 2014.

Z. Ding, M. R. Xu, J. G. Dai, B. Q. Dong, M. J. Zhang, S. X. Hong, and F. Xing, “Strengthening concrete using phosphate cement-based fiber-reinforced inorganic composites for improved fire resistance,” Construction and Building Materials, vol. 212, pp. 755–764, 2019.

A. Manalo, T. Aravinthan, A. Fam, and B. Benmokrane, “State-of-the-Art review on FRP sandwich systems for lightweight civil infrastructure,” Journal of Composite for Construction, vol. 21, p. 04016068, 2017.

H. A. Toutanji and W. Gómez, “Durability characteristics of concrete beams externally bonded with FRP composite sheets,” Cement and Concrete Composite, vol. 19, pp. 351–358, 1997.

R. Kalfat, R. Al-Mahaidi, and S. T. Smith, “Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with FRP composites: State-of-the-Art review,” Journal of Composiste for Construction, vol. 17, pp. 14–33, 2013.

F. Elgabbas, E. A. Ahmed, and B. Benmokrane, “Flexural behavior of concrete beams reinforced with ribbed basalt-FRP bars under static loads,” Journal of Composite for Construction, vol. 21, pp. 195–230, 2016.

A. E. Refai and F. Abed, “Concrete contribution to shear strength of beams reinforced with basalt fiber-reinforced bars,” Journal of Composite for Construction, vol. 20, pp. 150– 179, 2015.

F. Abed and A. R. Alhafiz, “Effect of basalt fibers on the flexural behavior of concrete beams reinforced with BFRP bars,” Composite Structure, vol. 215, pp. 23–34, 2019.

H. W. Zhang and S. T. Smith, “Influence of FRP anchor fan configuration and dowel angle on anchoring FRP plates,” Composite Part B-Engineering, vol. 43, pp. 3516–3527, 2012.

B. T. Huang, Q. H. Li, S. L. Xu, and B. Zhou, “Strengthening of reinforced concrete structure using sprayable fiber-reinforced cementitious composites with high ductility,” Composite Structure, vol. 220, pp. 940–952, 2019.

L. Cheng and V. M. Karbhari, “New bridge systems using FRP composites and concrete: A state-of-the-art review,” Progress in Structural Engineering and Materials, vol. 8, pp. 143– 154, 2006.

T. M. Pham and H. Hao, “Review of concrete structures strengthened with FRP against impact loading,” Structures, vol. 7, pp. 59–70, 2016.

P. Alagusundaramoorthy, I. E. Harik, and C. C. Choo, “Structural behavior of FRP composite bridge deck panels,” Journal of Bridge Engineering, vol. 11, pp. 384–393, 2006.

R. Gopinath, R. Poopathi, and S. S. Saravanakumar, “Characterization and structural performance of hybrid fiber-reinforced composite deck panels,” Advance Composite and Hybrid. Materials, vol. 2, pp. 115–124, 2019.

T. Ozbakkaloglu, J. C. Lim, and T. Vincent, “FRP-confined concrete in circular sections: Review and assessment of stress-strain models,” Engineering Structures, vol. 49, pp. 1068–1088, 2013.

E. Guades, T. Aravinthan, M. Islam, and A. A. Manalo, “A review on the driving performance of FRP composite piles,” Composite Structures, vol. 94, pp. 1932–1942, 2012.

R. Sen and G. Mullins, “Application of FRP composites for underwater piles repair,” Composite Part B-Engineering, vol. 38, pp. 751–758, 2007.

A. S. Mosallam and K. M. Mosalam, “Strengthening of two-way concrete slabs with FRP composite laminates,” Construction and Building Materials, vol. 17, pp. 43–54, 2003.