Analysis and Optimization of Delamination Factor for Microwaved Cured Pineapple Leaf Fiber Polymer Composite through ANOVA Analysis

Main Article Content

Manabendra Saha
Hari Singh
Vivek Srivastava
Manoj Kumar Singh

Abstract

Natural fiber-reinforced composites are quickly replacing other materials as the material of choice for various engineering applications because of their high specific strength, low weight, and affordability. Additionally, natural composites come in various forms and are environmentally benign. In particular, the composite needs to be drilled to put the pieces together. The entry and exit levels of the holes are prone to damage during the drilling process. In the present work, Low-density polyethylene (LDPE) was combined with pineapple leaf fiber (PALF) mat after first undergoing a chemical treatment in this investigation. Microwave curing was applied for fabricating the natural fiber composite with the three specified process parameters i.e., microwave power, % of NaOH solution, and weight percentage of treated fiber. After fabrication, the composite delamination factor and modified delamination factor were determined for evaluating the crack propagation after the drilling operation. At constant speed, the feed and diameter of the drill were used for making the drill in different samples. A CNC drilling machine was used to drill the constructed structure at various input parameters. Using the Taguchi approach, the entire work was analyzed. A tensile test was conducted to estimate the strength of the samples with specific parameters. The tensile strength increases up to 24.34 MPa. ANOVA analysis was used to find the best combination and affecting factors. It was observed that the weight percentage of the treated fiber mat has a maximum contribution percentage of 61 % for the processing of natural fiber polymer composite.

Article Details

How to Cite
Saha, M., Singh, H., Srivastava, V., & Singh, M. K. (2024). Analysis and Optimization of Delamination Factor for Microwaved Cured Pineapple Leaf Fiber Polymer Composite through ANOVA Analysis. Applied Science and Engineering Progress, 17(4), 7531. https://doi.org/10.14416/j.asep.2024.08.010
Section
Research Articles

References

R. Phiri, S. M. Rangappa, S. Siengchin, and D. Marinkovic, “Agro-waste natural fiber sample preparation techniques for bio-composites development: Methodological insights,” Facta Universitatis, Series: Mechanical Engineering, vol. 21, no. 4, p. 631, Dec. 2023, doi: 10.22190/ Fume230905046p.

A. K. Sinha, H. K. Narang, and S. Bhattacharya, “Mechanical properties of natural fiber polymer composites,” Journal of Polymer Engineering, vol. 37, no. 9, pp. 879–895, Nov. 2017, doi: 10.1515/polyeng-2016-0362.

S. M. Rangappa, S. Siengchin, and H. N. Dhakal, “Green-composites: Ecofriendly and sustainability,” Applied Science and Engineering Progress, vol. 13, no. 3, pp. 183–184, Jul. 01, 2020, doi: 10.14416/j.asep.2020.06.001.

M. K. Singh, R. Tewari, S. Zafar, S. M. Rangappa, and S. Siengchin, “A comprehensive review of various factors for application feasibility of natural fiber-reinforced polymer composites,” Results in Materials, vol. 17, Mar. 2023, Art. no. 100355, doi: 10.1016/j.rinma.2022. 100355.

B. V. Ramnath, V. M. Manickavasagam, C. Elanchezhian, C. V. Krishna, S. Karthik, and K. Saravanan, “Determination of mechanical properties of intra-layer abaca-jute-glass fiber reinforced composite,” Materials & Design, vol. 60, pp. 643–652, 2014, doi: 10.1016/j.matdes. 2014.03.061.

E. Zini and M. Scandola, “Green composites: An overview,” Polymer Composites, vol. 32, no. 12. pp. 1905–1915, Dec. 2011. doi: 10.1002/pc.21224.

M. K. Singh, N. Verma, and S. Zafar, “Conventional processing of polymer matrix composites,” in Lightweight Polymer Composite Structures: Design and Manufacturing Techniques. Florida: CRC Press, pp. 21–66, 2020.

S. Alsubari, M. Y. M. Zuhri, S. M. Sapuan, M. R. Ishak, R. A. Ilyas, and M. R. M. Asyraf, “Potential of natural fiber reinforced polymer composites in sandwich structures: A review on its mechanical properties,” Polymers, vol. 13, no. 3, pp. 1–20, 2021, doi: 10.3390/polym13030423.

S. Zafar, M. K. Singh, and N. Verma, “Method for manufacturing thermoplastic composite rom microwave-assisted compression molding,” Official Journal of the Patent Office, vol. 33, 2020, Art. no. 31228.

G. Arora, “Microwave irradiation manufacturing of polymer composites,” in Sustainable Advanced Manufacturing and Materials Processing. Florida: CRC Press, pp. 9–32, 2022, doi: 10.1201/ 9781003269298-2.

M. K. Singh and S. Zafar, “Influence of microwave power on mechanical properties of microwave-cured polyethylene/coir composites,” Journal of Natural Fibers, vol. 17, no. 6, 2018, doi: 10.1080/15440478.2018.1534192.

M. K. Singh and S. Zafar, “Development and mechanical characterization of microwave-cured thermoplastic based natural fibre reinforced composites,” Journal of Thermoplastic Composite Materials, vol. 32, no. 10, pp. 1427–1442, 2019, doi: 10.1177/0892705718799832.

S. Rao and R. Rao, “Cure studies on bifunctional epoxy matrices using a domestic microwave oven,” Polymer Testing, vol. 27, no. 5, pp. 645–652, 2008, doi: 10.1016/j.polymertesting.2008.04.005.

Rampal, G. Kumar, S. M. Rangappa, S. Siengchin, and S. Zafar, “A review of recent advancements in drilling of fiber-reinforced polymer composites,” Composites Part C: Open Access, vol. 9, 2022, Art. no. 100312, doi: 10.1016/j.jcomc.2022.100312.

I. Paul, T. Rajakumar, P. Hariharan, and L. Vijayaraghavan, “Drilling of carbon fiber reinforced plastic (CFRP) composites-A review,” International Journal of Materials and Product Technology, vol. 43, pp. 43–67, 2012, doi: 10.1016/j.jmrt.2022.08.161.

A. M. Kumar, R. Rajasekar, P. M. Kumar, R. Parameshwaran, A. Karthick, and M. Muhibbullah, “Comparative analysis of drilling behaviour of synthetic and natural Fiber-Based composites,” Advances in Materials Science and Engineering, vol. 2021, pp. 1–13, 2021, doi: 10.1155/2021/ 9019334.

P. K. Bajpai and I. Singh, “Drilling behavior of sisal fiber-reinforced polypropylene composite laminates,” Journal of Reinforced Plastics and Composites, vol. 32, no. 20, pp. 1569–1576, 2013, doi: 10.1177/0731684413492866.

K. Patel, P. P. Gohil, and V. Chaudhary, “Investigations on drilling of hemp/glass hybrid composites,” Materials and Manufacturing Processes, vol. 33, no. 15, pp. 1714–1725, 2018, doi: 10.1080/10426914.2018.1453150.

P. N. E. Naveen, “Experimental investigation of drilling parameters on composite materials,” Journal of Mechanical and Civil Engineering, vol. 2, pp. 30–37, 2012, doi: 10.9790/1684-0233037.

A. S. J. Sekaran and K. P. Kumar, “Study on drilling of woven sisal and aloevera natural fibre polymer composite,” Materials Today: Proceedings, vol. 16, pp. 640–646, 2019, doi: 10.1016/j.matpr. 2019.05.140.

E. Kilickap, “Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite,” Expert Systems with Applications, vol. 37, no. 8, pp. 6116–6122, 2010, doi: 10.1016/j.eswa.2010.02.023.

K. Palanikumar, “Experimental investigation and optimization in drilling of GFRP composites,” Measurement, vol. 44, no. 10, pp. 2138–2148, 2011, doi: 10.1016/j.measurement.2011.07.023.

E. Kilickap, “Modeling and optimization of burr height in drilling of Al-7075 using Taguchi method and response surface methodology,” The International Journal of Advanced Manufacturing Technology, vol. 49, pp. 911–923, 2010, doi: 10.1007/s00170-009-2469-x.

R. Çakıroğlu and A. Acır, “Optimization of cutting parameters on drill bit temperature in drilling by Taguchi method,” Measurement, vol. 46, no. 9, pp. 3525–3531, 2013, doi: 10.1016/ j.measurement.2013.06.046.

V. K. Vankanti and V. Ganta, “Optimization of process parameters in drilling of GFRP composite using Taguchi method,” Journal of Materials Research and Technology, vol. 3, no. 1, pp. 35–41, 2014, doi: 10.1016/j.jmrt.2013.10.007.

J. Arputhabalan, S. Prabhu, K. Palanikumar, S. Venkatesh, and K. Vijay, “Assay of machining attributes in drilling of natural hybrid fiber reinforced polymer composite,” Materials Today: Proceedings, vol. 16, pp. 1097–1105, 2019, doi: 10.1016/j.matpr.2019.05.201.

S. N. Fayzimatov, Y. Y. Xusanov, and D. A. Valixonov, “Optimization conditions of drilling polymeric composite materials,” The American Journal of Engineering and Technology, vol. 3, no. 02, pp. 22–30, 2021, doi: 10.37547/tajet/ Volume03Issue02-04.

Y. Kaynak, T. Lu, and I. S. Jawahir, “Cryogenic machining-induced surface integrity: A review and comparison with dry, MQL, and flood-cooled machining,” Machining Science and Technology, vol. 18, no. 2, pp. 149–198, 2014, doi: 10.1080/10910344.2014.897836.

L. Prasad, S. Kumar, R. V. Patel, A. Yadav, V. Kumar, and J. Winczek, “Physical and mechanical behaviour of sugarcane bagasse fibre-reinforced epoxy bio-composites,” Materials, vol. 13, no. 23, 2020, Art. no. 5387, doi: 10.3390/ma13235387.

R. V. Patel, A. Yadav, and J. Winczek, “Physical, mechanical, and thermal properties of natural Fiber-Reinforced epoxy composites for construction and automotive applications,” Applied Sciences, vol. 13, no. 8, p. 5126, 2023, doi: 10.3390/app13085126.

T. Raja, Y. Devarajan, G. Dhanraj, S. Pandiaraj, M. Rahaman, and M. Thiruvengadam, “Delamination analysis of drilling parameters on neem/banyan fiber–reinforced sawdust particulates hybrid polymer composite,” Biomass Conversion and Biorefinery, vol. 14, no. 9, pp. 10747–10757, 2024, doi: 10.1007/s13399-023-04951-x.

J. Davim, J. Rubio, and A. Abrao, “A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates,” Composites Science and Technology, vol. 67, no. 9, pp. 1939–1945, 2007, doi: 10.1016/j.compscitech.2006.10.009.

R. Benyettou, S. Amroune, M. Slamani, Y. Seki, A. Dufresne, M. Jawaid and S. Alamery, “Assessment of induced delamination drilling of natural fiber reinforced composites: A statistical analysis,” Journal of Materials Research and Technology, vol. 21, pp. 131–152, 2022, doi: 10.1016/j.jmrt.2022.08.161.