Mechanical Properties of Bacterial Cement Mortar Integrating Natural Banana Fibres
Article Sidebar
Main Article Content
Abstract
This investigation analyzes the usage of bacterial content and different lengths of banana fiber reinforced with variable percentages in cement mortar. Portland pozzolana cement (PPC) was combined with bacterial solutions (Bacillus cereus) at a concentration of 1.15×104 cells/ml to produce a mortar composite. By adding natural fibers like banana fiber to the composite components, the mechanical behavior of the bacterial mortar was enhanced. Mortar mixtures using banana fibers with different fiber concentrations (0.25, 0.5, 0.75, and 1%) and lengths (0.5, 1, 1.5, and 2 cm) were evaluated. Compressive and flexural strength was found to be greatly affected by the addition of banana fibers to concrete, but only at lower fiber levels of up to 0.25% for all fiber lengths. At lower fiber levels of up to 0.25%, the length of the fiber had no discernible effect on compressive strength; however, at larger dosages exceeding 0.25%, shorter fibers were shown to outperform longer ones. However, the mixing of bacterial content in the mortar is not only significant to the mechanical properties but also potentially lowers the carbon emissions, making it a more sustainable option for composite preparation. The stability of bacterial-based mortar and its compatibility with natural fibers further underscores the potential for eco-friendly construction materials. By exploring the chemical and physical properties of banana fibers treated with alkali chemicals and their compatibility with bacterial cultures, this study adds depth to our understanding of these composite materials. Overall, the proposed methodology for preparing these composites holds promise for future applications in the construction industry, offering a sustainable and efficient alternative to traditional materials.
Article Details
References
A. A. Nasser, N. M. Sorour, M. A. Saafan, and R. N. Abbas, “Microbially-Induced-Calcite-Precipitation (MICP): A biotechnological approach to enhance the durability of concrete using Bacillus pasteurii and Bacillus sphaericus,” Heliyon, vol. 8, no. 7, p. e09879, Jul. 2022, doi: 10.1016/j.heliyon.2022.e09879.
D. D. Zamba, T. A. Mohammed, Y. M. Getu, D. H. Tufa, and B. A. Demiss, “Experimental Investigation on Self-Healing Efficiency of Mortar with Bacillus subtilis and Bacillus cereus,” Advances in Materials Science and Engineering, vol. 2023, pp. 1–11, Apr. 2023, doi: 10.1155/2023/9399101.
D. M. Iqbal, L. S. Wong, and S. Y. Kong, “Bio-Cementation in Construction Materials: A Review,” Materials, vol. 14, no. 9, p. 2175, Apr. 2021, doi: 10.3390/ma14092175.
E. Tziviloglou, Z. Pan, H. M. Jonkers, and E. Schlangen, “Bio-based Self-healing Mortar: An Experimental and Numerical Study,” ACT, vol. 15, no. 9, pp. 536–543, Sep. 2017, doi: 10.3151/jact.15.536.
S. O. Ahmed, A. A. Nasser, R. N. Abbas, M. M. Kamal, M. A. Zahran, and N. M. Sorour, “Production of bioconcrete with improved durability properties using Alkaliphilic Egyptian bacteria,” 3 Biotech, vol. 11, no. 5, p. 231, May 2021, doi: 10.1007/s13205-021-02781-0.
N. Yamasamit, P. Sangkeaw, W. Jitchaijaroen, C. Thongchom, S. Keawsawasvong, and V. Kamchoom, “Effect of Bacillus subtilis on mechanical and self-healing properties in mortar with different crack widths and curing conditions,” Scientific Reports, vol. 13, no. 1, p. 7844, May 2023, doi: 10.1038/s41598-023-34837-x.
R. Anjali, S. A. Kumar, J. Gangolu, and R. Abiraami, “Experimental study on self-healing of micro-cracks in concrete with combination of environmentally friendly bacteria,” in Sustainable Structures and Buildings, A. Bahrami, Ed., Cham: Springer International Publishing, 2024, pp. 95–109, doi: 10.1007/978-3-031-46688-5_7.
B. A. Akinyemi and C. Dai, “Development of banana fibers and wood bottom ash modified cement mortars,” Construction and Building Materials, vol. 241, Apr. 2020, Art. no. 118041, doi: 10.1016/j.conbuildmat.2020.118041.
M. Barbuta, R. Bucur, A. A. Serbanoiu, S. Scutarasu, and A. Burlacu, “Combined effect of fly ash and fibers on properties of cement concrete,” Procedia Engineering, vol. 181, pp. 280–284, 2017, doi: 10.1016/j.proeng.2017.02.390.
M. Sravanthi, S. Venkateswara Rao, K. Krishnaveni, V. K. Lal Meenuga, and S. Kariveda, “Studies on compressive strength microstructural analysis of self-compacting mortar with bacteria,” Komunikácie, vol. 24, no. 4, pp. D183–D200, Oct. 2022, doi: 10.26552/com. C.2022.4.D183-D200.
W. De Muynck, D. Debrouwer, N. De Belie, and W. Verstraete, “Bacterial carbonate precipitation improves the durability of cementitious materials,” Cement and Concrete Research, vol. 38, no. 7, pp. 1005–1014, Jul. 2008, doi: 10.1016/j.cemconres.2008.03.005.
R. Siddique, V. Nanda, Kunal, E.-H. Kadri, M. I. Khan, M. Singh, and A. Rajor, “Influence of bacteria on compressive strength and permeation properties of concrete made with cement baghouse filter dust,” Construction and Building Materials, vol. 106, pp. 461–469, Mar. 2016, doi: 10.1016/j.conbuildmat.2015.12.112.
J. Xu and X. Wang, “Self-healing of concrete cracks by use of bacteria-containing low alkali cementitious material,” Construction and Building Materials, vol. 167, pp. 1–14, Apr. 2018, doi: 10.1016/j.conbuildmat.2018.02.020.
Y. Hu, W. Liu, Q. Zhang, X. Hu, and X. Hu, “Investigation of cement prepared with microencapsulated microorganisms,” ACS Omega, vol. 7, no. 3, pp. 2947–2959, Jan. 2022, doi: 10.1021/acsomega.1c05971.
A. Elbehiry, O. Elnawawy, M. Kassem, A. Zaher, N. Uddin, and M. Mostafa, “Performance of concrete beams reinforced using banana fiber bars,” Case Studies in Construction Materials, vol. 13, Dec. 2020, Art. no. e00361, doi: 10.1016/j.cscm.2020.e00361.
L. L’Entêté, N. A. Entêté, and H. Ramasawmy, “An investigation on the use of sodium hydroxide treated Pandanus utilis fibres in compression moulded polyester composite,” IJSPR, vol. 1, no. 1, pp. 68–82, 2022, doi: 10.1504/IJSPR.2022.121664.
S. O. Bamaga, “Physical and mechanical properties of mortars containing date palm fibers,” Mater. Res. Express, vol. 9, no. 1, Jan. 2022, Art. no. 015102, doi: 10.1088/2053-1591/ac48b7.
H. Amjad, R. A. Khushnood, and S. A. Memon, “Biomimetic robust self-healing of Bacillus Subtilis immobilized through sisal fiber for next-generation concrete infrastructure,” Construction and Building Materials, vol. 368, Mar. 2023, Art. no. 130299, doi: 10.1016/j.conbuildmat. 2023.130299.
M. H. Nensok, M. A. O. Mydin, and H. Awang, “Optimization of mechanical properties of cellular lightweight concrete with alkali treated banana fiber,” Revista De La Construcción. Journal of Construction, vol. 20, no. 3, pp. 491–511, 2021, doi: 10.7764/RDLC.20.3.491.
Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM C496-96, 2017.
Precast Concrete Blocks for Paving, IS 15658, 2006.
A. Warudkar, S. Elavenil, and A. Arunkumar, “Assessment of abrasion resistance of concrete pavement for durability,” International Journal of Civil Engineering and Technology, vol. 9, no. 6, pp. 1176–1181, Jun. 2018.
T. A. Pathan and R. A. Jhumarwala, “Evaluation of mechanical properties of high strength banana fibre concrete (HSBFC) incorporating fly ash and silica fume,” IJRASET, vol. 10, no. 12, pp. 780–785, Dec. 2022, doi: 10.22214/ijraset.2022. 47892.
Method for Determination of Water Absorption, Testing concrete - part 122, 1998.
C. Xiong, T. Lan, Q. Li, H. Li, and W. Long, “Study of mechanical properties of an eco-friendly concrete containing recycled carbon fiber reinforced polymer and recycled aggregate,” Materials, vol. 13, no. 20, p. 4592, Oct. 2020, doi: 10.3390/ma13204592.
F. Wu, Q. Yu, C. Liu, H. J. H. Brouwers, L. Wang, and D. Liu, “Effect of fibre type and content on performance of bio-based concrete containing heat-treated apricot shell,” Materials and Structures, vol. 53, no. 6, p. 137, Dec. 2020, doi: 10.1617/s11527-020-01570-0.
M. Khan and M. Cao, “Effect of hybrid basalt fibre length and content on properties of cementitious composites,” Magazine of Concrete Research, vol. 73, no. 10, pp. 487–498, May 2021, doi: 10.1680/jmacr.19.00226.
T. Plagué, C. Desmettre, and J.-P. Charron, “Influence of fiber type and fiber orientation on cracking and permeability of reinforced concrete under tensile loading,” Cement and Concrete Research, vol. 94, pp. 59–70, Apr. 2017, doi: 10.1016/j.cemconres.2017.01.004.
P. S. Song, S. Hwang, and B. C. Sheu, “Strength properties of nylon- and polypropylene-fiber-reinforced concretes,” Cement and Concrete Research, vol. 35, no. 8, pp. 1546–1550, Aug. 2005, doi: 10.1016/j.cemconres.2004.06.033.
P. Manikandan, V. Vasugi, V. P. Kumar, S. Duraimurugan, M. Sankar, A. C. Ganesh, and G. S. Kumaran, “A neural network-based prediction of superplasticizers effect on the workability and compressive characteristics of portland pozzolana cement-based mortars,” Advances in Materials Science and Engineering, vol. 2023, pp. 1–14, May 2023, doi: 10.1155/2023/2605414.
R. B. Mugume, A. Karubanga, and M. Kyakula, “Impact of addition of banana fibres at varying fibre length and content on mechanical and microstructural properties of concrete,” Advances in Civil Engineering, vol. 2021, pp. 1–15, Oct. 2021, doi: 10.1155/2021/9422352.
B. Mobasher, Mechanics of fiber and Textile Reinforced Cement Composites. New York: CRC Press, 2019.
M. Mastali, A. Dalvand, and A. Sattarifard, “The impact resistance and mechanical properties of the reinforced self-compacting concrete incorporating recycled CFRP fiber with different lengths and dosages,” Composites Part B: Engineering, vol. 112, pp. 74–92, Mar. 2017, doi: 10.1016/j.compositesb.2016.12.029.
L. Chen, Z. Chen, Z. Xie, L. Wei, J. Hua, L. Huang, and P.-S. Yap, “Recent developments on natural fiber concrete: A review of properties, sustainability, applications, barriers, and opportunities,” Developments in the Built Environment, vol. 16, p. 100255, Dec. 2023, doi: 10.1016/j.dibe.2023.100255.