พฤติกรรมของคานคอนกรีตเสริมเหล็กที่เสริมกำลังโดยใช้แผ่นเหล็กยึดติดด้วยอีพ็อกซี่และสลักเกลียว
Main Article Content
บทคัดย่อ
ดังเป็นที่ยอมรับโดยทั่วไปในงานวิจัยส่วนใหญ่ที่ได้ตีพิมพ์เผยแพร่ก่อนหน้านี้ว่า ลำพังการใช้การยึดติดแผ่นเหล็กด้วยวัสดุประสานสำหรับการเสริมกำลังจากภายนอกของคานคอนกรีตเสริมเหล็กมีประสิทธิภาพน้อยกว่าการใช้งานร่วมกันระหว่างการยึดติดแผ่นเหล็กและการจับยึดที่ปลายของแผ่นเหล็ก คานคอนกรีตเสริมเหล็กที่เสริมกำลังโดยไม่มีการจับยึดที่ปลายแผ่นนั้นบ่อยครั้งสามารถนำไปสู่การวิบัติจากการหลุดล่อนแบบเปราะก่อนที่น้ำหนักบรรทุกประลัยจะไปถึง ด้วยการจัดเตรียมตัวจับยึดปลายแผ่นเชิงกลให้กับคานเสริมกำลังพบว่า รูปแบบการวิบัติกลายมาเป็นการวิบัติแบบเหนียวเชิงดัดและความสามารถในการรับน้ำหนักบรรทุกของคานเสริมกำลังเพิ่มขึ้น ความมุ่งหมายของการศึกษา ณ ปัจจุบันนั้นคือ เพื่อทวนทบสอบความมีประสิทธิภาพและสมรรถนะของคานและเพื่อนำเสนอพฤติกรรมการตอบสนองสำหรับทั้งการเสริมกำลังคานคอนกรีตเสริมเหล็กรับแรงดึงอย่างเดียวและเสริมเหล็กรับแรงดึงและแรงอัดที่มีสลักเกลียวจับยึดที่ปลายแผ่นและภายในแผ่น ผลลัพธ์เชิงทดลองที่ได้มามีการนำเสนอสำหรับความสัมพันธ์ระหว่างน้ำหนักบรรทุกและการแอ่นตัวและความสามารถด้านกำลังต่างๆ ของคานกล่าวคือ น้ำหนักบรรทุกแตกร้าวเริ่มแรก น้ำหนักบรรทุกคราก น้ำหนักบรรทุกจากการหลุดล่อนและน้ำหนักบรรทุกประลัย
Article Details

อนุญาตภายใต้เงื่อนไข Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
บทความนี้เป็นลิขสิทธิ์ของวารสาร Engineering Transactions คณะวิศวกรรมศาสตร์และเทคโนโลยี มหาวิทยาลัยเทคโนโลยีมหานคร
เอกสารอ้างอิง
J.C. McCormac, Design of Reinforced Concrete, 5th ed., John Wiley & Sons Inc., New York, 2001.
D.J. Oehlers and M.A. Bradford, Elementary Behaviour of Composite Steel and Concrete Structural Members, Butterworth-Heinemann, Oxford, 1999.
K. Zilch, R. Niedermeier, and W. Finckh, Strengthening of Concrete Structures with Adhesively Bonded Reinforcement: Design and Dimensioning of CFRP Laminates and Steel Plates, Wilhelm Ernst & Sohn, Berlin, 2014.
I.L.K. Reid, Concrete Bridge Strengthening and Repair, Thomas Telford Ltd., London, 2009.
R. Jones, R.N. Swamy, and T.H. Ang, “Under- and over-reinforced concrete beams with glued steel plates,” Int. J. Cem. Compos. Lightweight Concr., vol. 4, pp. 19-32, 1982.
O. Vilnay, “The analysis of reinforced concrete beams strengthened by epoxy bonded steel plates,” Int. J. Cem. Compos. Lightweight Concr., vol. 10, pp. 73-78, 1988.
D.J. Oehlers, “Reinforced concrete beams with plates glued to their soffits,” J. Struct. Eng., vol. 118, pp. 2023-2038, 1992.
A. Gomes and J. Appleton, “Strengthening design of concrete beams by addition of steel plates,” in Proc. Int. Conf. on Enhancement and Promotion of Computational Methods in Engineering and Science, August 2-5, 1999, Macau, pp. 657-666, 1999.
H.E.M. Sallam, A.M. Saba, H.H. Shahin, and H. Abdel-Raouf, “Prevention of peeling failure in plated beams,” J. Adv. Concr. Technol., vol. 2, pp. 419-429, 2004
M.Z. Jumaat and M.A. Alam, “Plate bonded strengthened R.C. beams with end and intermediate anchors,” Int. J. Eng. Technol., vol. 4, pp. 185-193, 2007.
S.D. Ngidi and M. Dundu, “Repair of reinforced concrete beams with adhesive bonded steel plates,” in Proc. the 14th Int. Conf. on Structural and Geotechnical Engineering, December 20-22, 2015, Cairo, Egypt, 2015.
E.M. Lotfy and W. Elkamash, “Numerical study of R.C. beams strengthening by external steel plate,” Am. J. Eng. Res., vol. 6, pp. 48-56, 2017.
J. Tarigan, F.M. Patra, and T. Sitorus, “Flexural strength using steel plate, carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) on reinforced concrete beam in building technology,” IOP Conf. Ser.: Earth Environ. Sci., vol. 126, article no. 012025, 2018.
Y.G. Abtan, “Effective length and area of bolted steel plates attached externally to strengthen reinforced concrete beams,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 737, article no. 012012, 2020.
H. Tang, J. Peng, and J. Zhang, “Influence of further corrosion on structural behavior of corroded reinforced-concrete beam strengthened with steel plate using different strengthening schemes,” J. Perform. Constr. Facil, vol. 34, article no. 04019117, 2020.