T-Shape Electrode Design for an Open Type Electro-Wetting on Dielectric: doi: 10.14456/mijet.2016.2

Kreeta Sukthang; Chadchawarn Pongsomboon; Pantakan Jiartaweesin; Wishsanuruk Wechsatol; Adisorn Tuantranont

T-Shape Electrode Design for an Open Type Electro-Wetting on Dielectric

doi: 10.14456/mijet.2016.2

Authors

Kreeta Sukthang Department of Mechanical Engineering, King Mongkut‟s University of Technology Thonburi 126 Prachautid Rd, Bandmod, Thungkru, Bangkok 10140, THAILAND
Chadchawarn Pongsomboon
Pantakan Jiartaweesin
Wishsanuruk Wechsatol
Adisorn Tuantranont

Keywords:

Open Type EWOD, Electrode, Manipulation of Droplet, Electro-Wetting on Dielectrics

Abstract

This work proposes the electro-wetting on dielectric (EWOD) design for manipulating the movement of 5 microliter DI water droplets on a T-shaped electrode layer. The fabrication methods for open-type EWOD are mentioned in detail. With the attached voltage and frequency control equipment, the created EWOD device could precisely manipulate the droplet movement on top of the device as expected.

Downloads

PDF doi: 10.14456/mijet.2016.2

Published

2016-07-01

How to Cite

Sukthang, K., Pongsomboon, C., Jiartaweesin, P., Wechsatol, W., & Tuantranont, A. (2016). T-Shape Electrode Design for an Open Type Electro-Wetting on Dielectric: doi: 10.14456/mijet.2016.2. Engineering Access, 2(1), 1–5. Retrieved from https://ph02.tci-thaijo.org/index.php/mijet/article/view/10.14456.mijet.2016.2