THE STUDY AND OPTIMUM DESIGN OF THE STRAINER PLATE IN THE FILTER TANK BY USING THE FINITE ELEMENT METHOD
คำสำคัญ:
Simulation, Strainer plate, Finite element method, Filter tank, Pressure vesselบทคัดย่อ
This study focused on designing water strainer plates for producing water filter tanks in the industrial sector. The main issues included difficulties in manufacturing strainer plates and problems related to incomplete welding and inadequate painting of support strainer plates. To address these challenges, the project conducted an analysis using various tools to identify and solve problems. This project employed a finite element analysis method to design strainer plates that resolved the mentioned shortcomings. The result showed that the development of strainer plates using a flat bar type (Type-3) with a beam structure had the lowest displacement value, cut production time by 12% and material costs by 25%. This project could potentially elevate the industrial sector to produce water filter tanks, resolve the identified issues, and improve their manufacture.
References
ASME. (2011). The American Society of Mechanical Engineers Boiler & Pressure Vessel Committee on Pressure Vessels Section VIII Division (1st ed.). Addenda 2011a.
Cao, X.J., & Miao, D.H. (2014). Research the Application of Elliptic Filter Plate to Horizontal Filtering Tank. Advanced Materials Research, 1004-1005, 1275–1280.
Chang, K.H. (2015). Design Optimization. Massachusetts: Academic Press. Doi: 10.1016/b978-0-12-382038-9.00017-x
Gao, B.J., Shi, X.P., Liu, H.Y., & Li, J.H. (2007). Separation of Primary Stress in Finite Element Analysis of Pressure Vessel with the Principle of Superposition. Key Engineering Materials, 353-358, 373–376.
Li, W.J., Liu, G.P., Li, D.H., & Yu,T. (2014). Finite Element Analysis and Optimum Design for Pressure Vessel Based on ANSYS Workbench. Applied Mechanics and Materials, 687-691, 290–293. Doi: 10.4028/www.scientific.net/AMM.687-691.290
Shinde, J., Kharade, S., Mulani, A., Kokare, K., Tapase, C., & Terani, A. (2022). Design and analysis of front axle using Solidworks simulation. International Research Journal of Engineering and Technology (IRJET), 9(5), 3477-3483.
Skopinskyand, V.N., & Smetankin, A.B. (2006). Modelling and Stress analysis of nozzle connections in Ellipsoidal heads of Pressure vessels under External loading. International Journal of Applied Mechanics and Engineering, 11(4), 965- 979.
Urdea, M. (2018). Static linear analysis for trusses structure for supporting pipes. IOP Conference Series: Materials Science and Engineering. Doi: 10.1088/1757-899X/399/1/012051
Venkatachalam, G., Nishanth, J., Mukesh, M., & Pavan Kumar, D.S. (2016). Investigations on Influence of Geometric Parameters in Drawing of Perforated Sheet Metals. Applied Mechanics and Materials, 852, 229–235.
Vicharnat, P. (2013, May). Study and Design of Pressure Vessel Thickness and Anthracite Filter Tray in the Pressure Vessel Using Finite Element Method. RSU Research Conference 2013, Sangsit University, Bangkok.
Wang, J., Huang, X.Y., & Sang, S.J. (2011). Using Multiple Methods for Rapid Programming in SolidWorks. Applied Mechanics and Materials, 48-49, 1337–1340.
Wang, W., Shi, J.B., Luo, M.F., Wang, Y.F. (2011). Study on a Large Opening in a Pressure Vessel. Advanced Materials Research, 308-310, 58–61.
Zhang, C.L., & Yang, F. (2011). Pressure Vessel Optimization Design Based on the Finite Element Analysis. Applied Mechanics and Materials, 65, 281–284. Doi: 10.4028/www.scientific.net/AMM.65.281
Zhang, J. (2013). EFD Fluid Simulation of Ball Valve on SolidWorks. Advanced Materials Research, 823, 13–16.
