การผลิตไฟฟ้าด้วยกังหันลมที่มีการตามรอยกำลังไฟฟ้าสูงสุด โดยใช้ลมจากระบบระบายอากาศของการทำความเย็นแบบระเหยน้ำ

Main Article Content

กองพัน อารีรักษ์

บทคัดย่อ

บทความนี้นำเสนอการผลิตไฟฟ้าด้วยพลังงานลมจากระบบระบายอากาศของโรงเรือนที่มีการทำความเย็นแบบระเหยน้ำ โดยอาศัยระบบกังหันลมผลิตไฟฟ้า พลังงานเอาต์พุตของกังหันลมที่สกัดได้จากพลังงานลมโดยทั่วไปขึ้นอยู่กับความเร็วลมและมีความไม่เป็นเชิงเส้น ในแต่ละความเร็วลมจะมีจุดการทำงานที่มีค่ากำลังสูงสุดเพียงตำแหน่งเดียวเท่านั้น ด้วยเหตุนี้จึงจำเป็นต้องอาศัยระบบควบคุมตามรอยกำลังสูงสุด ขั้นตอนวิธีการที่นำเสนอจะแสดงให้เห็นว่าสามารถดึงกำลังสูงสุดจากระบบกังหันลมผลิตไฟฟ้าได้ การดำเนินงานวิจัยในเบื้องต้นเป็นการศึกษาและการจำลองสถานการณ์ระบบกังหันลมผลิตไฟฟ้าที่มีการตามรอยกำลังสูงสุด รวมถึงการพัฒนาและปรับปรุงระบบควบคุมตามรอยกำลังสูงสุดให้มีประสิทธิภาพสะดวกต่อการนำไปใช้งาน ผลการทดสอบจากชุดต้นแบบแสดงให้เห็นถึงประสิทธิภาพการผลิตไฟฟ้าที่ได้นำเสนอโดยใช้ลมจากระบบระบายอากาศของโรงเรือนที่มีการทำความเย็นแบบระเหยน้ำ

Article Details

รูปแบบการอ้างอิง
[1]
อารีรักษ์ ก., “การผลิตไฟฟ้าด้วยกังหันลมที่มีการตามรอยกำลังไฟฟ้าสูงสุด โดยใช้ลมจากระบบระบายอากาศของการทำความเย็นแบบระเหยน้ำ”, sej, ปี 13, ฉบับที่ 3, น. 18–30, พ.ย. 2018.
ประเภทบทความ
บทความวิจัย

เอกสารอ้างอิง

[1] A. Urtasun, P. Sanchis and L. Marroyo, “Small Wind Turbine Sensorless MPPT: Robustness Analysis and Lossless Approach,”IEEE Transactions on Industry Applications, Vol. 50, Issue. 6, pp. 4113 – 4121, Nov 2014.

[2] S. Lalouni, D. Rekioua, K. Idjdarene and A. Tounzi, “Maximum Power Point Tracking Based Hybrid Hill-climb Search Method Applied to Wind Energy Conversion System,” Electric Power Components and Systems, Vol. 43, Issue. 8, pp. 1028-1038, Nov 2015.

[3] E. Koutroulis and K. Kalaitzakis, “Design of a maximum power tracking system for wind-energy-conversion applications,”IEEE Transactions on Industrial Electronics, Vol. 53, Issue. 2, pp. 486–494, April 2006.

[4] R. Kot, M. Rolak and M. Malinowski, “Comparison of maximum peak power tracking algorithms for a small wind turbine,” Mathematics and Computers in Simulation, Vol. 91, pp. 29–40, May 2013.

[5] K-H. Kim, T. Van, D-C. Lee, S-H. Song and E. Kim, “Maximum Output Power Tracking Control in Variable-Speed Wind Turbine Systems Considering Rotor Inertial Power,” IEEE Transactions on industrial Electronics, Vol. 60, Issue. 8, pp. 3207-3217, Aug 2013.

[6] O. Carranzaa, E. Figueresb, G. Garceráb and L. G. Gonzalezc, “Comparative study of speed estimators with highly noisy measurement signals for Wind Energy Generation Systems,” Applied Energy, Vol. 88, Issue. 3, pp. 805–813, March 2011.

[7] S. Muhammad, R. Kazmi, H. Goto, H.-J. Guo and O. Ichinokura, “A Novel Algorithm for Fast and Efficient Speed-Sensorless Maximum Power Point Tracking in Wind Energy Conversion Systems,” IEEE Transactions on Industrial Electronics, Vol. 58, Issue. 1, pp. 29 – 36, Jan 2011.

[8] L.G. Gonzáleza, E. Figueresb, G. Garceráb and O. Carranzac, “Maximum-power-point tracking with reduced mechanical stress applied to wind-energy-conversion-systems,” Applied Energy, Vol. 87, Issue. 7, pp. 2304–2312, July 2010.

[9] Y. Xia, K. H. Ahmed and B. W. Williams, “Wind Turbine Power Coefficient Analysis of a New Maximum Power Point Tracking Technique,” IEEE Transactions on Industrial Electronics, Vol. 60, Issue. 3, pp. 1122–1132, March 2013.

[10] Z. M. Dalala, Z. U. Zahid, W. Yu, Y. Cho and J.-S. (Jason). Lai, “Design and Analysis of an MPPT Technique for Small-Scale Wind Energy Conversion Systems,” IEEE Transactions on Energy Conversion, Vol. 28, Issue. 3, pp. 756–767, Sept 2013.

[11] Y. Dailia, J.-P. Gaubertb and L. Rahmania, “Implementation of a new maximum power point tracking control strategy for small wind energy conversion systems without mechanical sensors,” Energy Conversion and Management, Vol. 97, pp. 298–306, June 2015.

[12] Q.-N. Trinh and H.-H. Lee, “Fuzzy Logic Controller for Maximum Power Tracking in PMSG-Based Wind Power Systems,” Advanced Intelligent Computing Theories and Applications. With Aspects of Artificial Intelligence, Springer, pp. 543-553, 2010.

[13] J. Lee and Y.-S. Kim, “Sensorless fuzzy-logic-based maximum power point tracking control for a small-scale wind power generation systems with a switched-mode rectifier,” IET Renewable Power Generation, 10, Issue 2, pp. 194 –202, Feb 2016.