การสูญเสียน้ำหนักระหว่างการวิเคราะห์ของแข็งแขวนลอยทั้งหมดโดยไมโครเวฟ

Main Article Content

ชนยิตรี แสงวิจิตร
ประภากรณ์ แสงวิจิตร

บทคัดย่อ

งานวิจัยนี้เป็นการวิจัยกึ่งทดลอง มีวัตถุประสงค์เพื่อศึกษาร้อยละการสูญเสียน้ำหนัก ที่เกิดขึ้นจากของแข็งแขวนลอยระเหยได้ ในขั้นตอน การวิเคราะห์ของแข็งแขวนลอยทั้งหมด โดยใช้ไมโครเวฟ พร้อมทั้งเปรียบเทียบค่าพลังงานไฟฟ้าที่วิเคราะห์ระหว่างวิธีมาตรฐานและวิธีไมโครเวฟ เทียบกับจำนวนเงินเพื่อลดค่าใช้จ่าย ผลการวิจัยพบว่า การวิเคราะห์ของแข็งแขวนลอยทั้งหมด โดยใช้ไมโครเวฟกำลังไฟ 800 วัตต์ ระดับความร้อน High ที่ระยะเวลา 2 4 6 8 และ 10 นาที มีการสูญเสียของแข็งแขวนลอยระเหยได้ร้อยละ 0.6 1.4 3.3 4.1 และ 4.5 ตามลำดับ ค่าพลังงานไฟฟ้าที่ วิเคราะห์ของแข็งแขวนลอยทั้งหมด โดยใช้ไมโครเวฟ คิดเป็น 0.005 - 0.026 บาทต่อตัวอย่าง และวิธีมาตรฐานคิดเป็น 0.050 บาทต่อตัวอย่าง สำหรับการวิเคราะห์ของแข็งแขวนลอยต่อวัน วิธีไมโครเวฟมีปริมาณเท่ากับวิธีมาตรฐานจะต้องใช้ไมโครเวฟ 2 เครื่อง ต่อตู้อบ 1 เครื่อง ทำให้ลดค่าใช้จ่ายในการซื้อตู้อบได้ประมาณ 50,000 - 60,000 บาท

Article Details

ประเภทบทความ
บทความวิจัย (Research Article)

เอกสารอ้างอิง

[1] American Public Health Association, Water Environment Federation, American Water Works Association. Standard methods for the examination of water and wastewater. Methods 2540 D Total Suspended Solids Dried at 103 – 105°C. 23rd ed. Washington, D.C.: APHA-AWWA-WEF; 2017.
[2] Jones DA, Lelyveld TP, Mavrofidis SD, Kingman SW, Miles NJ. Microwave heating applications in environmental engineering—a review. Resources, Conservation and Recycling. 2002;34(2):75-90.
[3] Tata A ed., Hospital waste sterilization: a technical-economic comparison between radiation and microwaves treatment technologies - Part two. 1995; Italy: C.I.P.A.
[4] Yu Q, Lei H, Yu G, Feng X, Li Z, Wu Z. Influence of microwave irradiation on sludge dewaterability. Chemical Engineering Journal. 2009;155(1):88-93.
[5] Vongpradubchai S, Rattanadecho P. Microwave and Hot Air Drying of Wood Using a Rectangular Waveguide. Drying Technology. 2011;29(4):451-60.
[6] Association of Official Analytical Chemists. Official Methods of Analysis. Methods 7.007 Moisture in Animal Feed. 15th ed. Gaithersburg, M.D.: AOAC; 1990.
[8] American Public Health Association, Water Environment Federation, American Water Works Association. Standard methods for the examination of water and wastewater. Methods 2540 C Total Dissolved Solids Dried at 180°C. 23rd ed. Washington, D.C.: APHA-AWWA-WEF; 2017.
[9] American Public Health Association, Water Environment Federation, American Water Works Association. Standard methods for the examination of water and wastewater. Methods 2540 A Introduction. 23rd ed. Washington, D.C.: APHA-AWWA-WEF; 2017.
[10] Charoenphun N, Meemuk N. Effects of Different Blanching Methods on Quality of Orange Sweet Potatoes. Thai Science and Technology Journal. 2018;26(6): 981-992.
[11] American Public Health Association, Water Environment Federation, American Water Works Association. Standard methods for the examination of water and wastewater. Methods 2540 E Fixed and Volatile Solids Ignited at 550°C. 23rd ed. Washington, D.C.: APHA-AWWA-WEF; 2017.
[12] Sittiwong W. Study of Hot Air Flow Behavior using EasyFEM Simulation and Shadowgraph Techniques. UBU Engineering Journal. 2015;8(1): 37-50.