สมบัติของยางธรรมชาติที่มีซิลิกาจากแกลบข้าวเคลือบพอลิเอทิลีนเป็นสารตัวเติม

Main Article Content

Kanjarat Sukrat
Adisak Jaturapiree
Ekrachan Chaichana
Thanunya Saowapark

บทคัดย่อ

          การศึกษานี้ศึกษาสมบัติการคงรูปและความต้านทานต่อแรงดึงของยางธรรมชาติที่มีซิลิกาจากแกลบข้าวที่ปรับปรุงผิวด้วยการเคลือบด้วยพอลิเอทิลีนเป็นสารตัวเติม โดยการเตรียมซิลิกาจากแกลบข้าว (SC/RH) ทำได้โดยนำแกลบข้าวมาเผาที่ 700 ̊C เมื่อนำไปวิเคราะห์ พบว่าประกอบด้วยซิลิกาถึงร้อยละ 99 และมีโครงสร้างเป็นแบบอสัณฐาน หลังจากนั้นนำซิลิกาที่ได้ไปปรับปรุงโดยใช้พอลิเอทิลีน (PE) ผ่านกระบวนการอินซิทูพอลิเมอร์ไรเซชันเปรียบเทียบกับซิลิกาเกรดการค้า (SC/com) พบว่า ซิลิกาทั้ง 2 ชนิดมี PE เคลือบอยู่ที่พื้นผิว เมื่อนำซิลิกาจากแกลบ และเกรดการค้าที่ยังไม่ได้ทำปรับปรุงพื้นผิว (SC/RH และ SC/com) และปรับปรุงพื้นผิวด้วย PE (SC/RH-PE และ SC/com-PE) มาใช้เป็นสารตัวเติมในยางธรรมชาติ พบว่า การใช้ซิลิกาปรับปรุงพื้นผิวด้วย PE เป็นสารตัวเติมส่งผลให้ระยะเวลาการคงรูปลดลง ผลต่างของแรงบิดและค่าความต้านทานต่อแรงดึงมีค่าเพิ่มขึ้น เนื่องจาก PE ที่เคลือบบนพื้นผิวของซิลิกานั้นสามารถลดการดูดซับตัวเร่งการเกิดปฏิกิริยาการคงรูป อีกทั้งลดอันตรกิริยาระหว่างสารตัวเติมหรือซิลิกา ส่งผลให้เกิดอันตรกิริยากับยางธรรมชาติได้ดีขึ้นซึ่งสอดคล้องกับผลของยางส่วนที่ติดกับอนุภาคของสารตัวเติม

Article Details

ประเภทบทความ
บทความวิจัย

เอกสารอ้างอิง

[1] Boonstra, B. B. (1973). Filler review: Carbon Black and Nonblack. Rubber Technology. New York: Van
Nostrand Reinhold.
[2] Mark, J.E., Erman, B. and Eirich, F.R. (2005). The Science and Technology of Rubber (3rd edition).
New York: Elsevier Academic.
[3] Hewitt, N. (2007). Compounding Precipitated Silica in Elastomers (1st edition). New York: William
Andrew Inc.
[4] Choi, S., Chung, K.H. and Nah, C. (2003). “Improvement of properties of silica-filled styrene-butadiene
rubber (SBR) compounds using acrylonitrile-styrene-butadiene rubber (NSBR)”, Polymer Advance
Technology. 14, 557-564.
[5] Ansarifar, A., Nijihawan, R., Nanapoolsin, T. and Song, M. (2003). “Reinforcing effect of silica and silane
fillers on the properties of some natural rubber vulcanizates”, Rubber Chemistry Technolology.
76, 1290-1310.
[6] Luginsland, H.D., Frohlich, J. and Wehmeier, A. (2002). “Influence of different silanes on the reinforcement
of silica filled rubber compounds”, Rubber Chemistry Technolology. 75, 563-579.
[7] Sae-Oui, P., Thepsuwan, U. and Hattapanit, K. (2004). “Effect of curing system on reinforcing efficiency of
silane coupling agent”, Polymer Testing. 23, 397-403.
[8] Sooyeon, K., Eunhye, K., Sungsoo, K. and Woosik, K. (2005). “Surface modification of silica nanoparticles
by UV-induced graft polymerization of methyl methacrylate”, Journal of Colloid and Interface
Science. 292, 93-98.
[9] Jianfei, C., Baoyong, L., Xujie, Y., Lude, L. and Xin, W. (2005). “Graft polymerization onto nano-sized SiO2
surface and its application to the modification of PBT”, Journal of Materials Letters. 59, 1603-1609.
[10] Chuayjuljit, S., Eiumnoh, S. and Potiyaraj, P. (2001). “Using silica from rice husk as a reinforcing filler in
natural rubber”, The Journal of Scientific Research Chulalongkorn University. 26, 127-138.
[11] Sombatsompop, N., Thongsang, S., Markpin, T. and Wimonmala, E. (2004). “Fly ash particles and
precipitated silica as fillers in rubbers. I. Untreated fillers in natural rubber and styrene–butadiene
rubber compound”, Journal of Applied Polymer Science. 93(5), 2119–2130.
[12] Phewphong, P., Saeoui, P. and Sirisinha, C. (2008). “Mechanism of silica reinforcement in CPE/NR blends
by the use of rheological approaches”, Journal of Applied Polymer Science. 107, 2638-45.
[13] Choi, S. (2001). “Influence of the silica content on rheological behaviour and cure characteristics of silica
filled styrene-butadienen rubber compound”, Polymer International. 50, 525-530.