การควบคุมอุณหภูมิและความชื้นสัมพัทธ์ในโรงเรือนเพาะปลูกที่ใช้ระบบทำความเย็นแบบแผ่นระเหยน้ำ

Main Article Content

วัศพล จันพายัพ
เทวรัตน์ ตรีอำนรรค
กระวี ตรีอำนรรค

บทคัดย่อ

งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาการควบคุมอุณหภูมิและความชื้นสัมพัทธ์ของอากาศภายในโรงเรือนเพาะปลูกที่ติดตั้งระบบทำความเย็นแบบแผ่นระเหยน้ำ ระบบการควบคุมแบ่งออกเป็น 3 ระบบ ได้แก่ ระบบควบคุมอุณหภูมิที่ 25 องศาเซลเซียส ระบบควบคุมความชื้นสัมพัทธ์ที่ร้อยละ 70 และระบบควบคุมแรงดึงระเหยน้ำของอากาศที่ 0.85 กิโลปาสคาล พบว่าระบบควบคุมอุณหภูมิสามารถควบคุมอุณหภูมิเฉลี่ยให้มีค่าประมาณ 25 องศาเซลเซียสได้ในวันที่อากาศมีอุณหภูมิไม่สูง แต่ในวันที่อุณหภูมิของอากาศสูงระบบไม่สามารถควบคุมหรือลดอุณหภูมิเฉลี่ยภายในโรงเรือนให้มีค่าตามที่กำหนดได้ แต่จะสามารถควบคุมอุณหภูมิเฉลี่ยภายในโรงเรือนให้มีค่าต่ำกว่าภายนอกโรงเรือนอยู่ประมาณ 5-7 องศาเซลเซียส ระบบควบคุมความชื้นสัมพัทธ์สามารถควบคุมความชื้นสัมพัทธ์เฉลี่ยภายในโรงเรือนได้ทุกวันที่ทำการทดสอบให้มีค่าประมาณร้อยละ 70 แต่อุณหภูมิเฉลี่ยภายในโรงเรือนมีค่าสูงประมาณ 28-35 องศาเซลเซียส และระบบควบคุมแรงดึงระเหยน้ำของอากาศสามารถควบคุมให้มีค่าตามที่กำหนดได้บางช่วงเวลา โดยจะแปรผันไปตามอุณหภูมิและความชื้นสัมพัทธ์ของอากาศ ซึ่งค่าอุณหภูมิและความชื้นสัมพัทธ์เฉลี่ยภายในโรงเรือนยังอยู่ในช่วงที่เหมาะสมต่อการปลูกพืชในโรงเรือน การใช้น้ำและพลังไฟฟ้าของระบบนั้นจะขึ้นอยู่กับสภาพอากาศและการทำงานของระบบควบคุมเป็นหลัก โดยในวันที่อากาศมีอุณหภูมิสูงและความชื้นต่ำ จะทำให้มีการใช้น้ำและพลังงานไฟฟ้าที่สูง เนื่องจากระบบควบคุมใช้เวลาในการทำงานที่ยาวนานขึ้นและใช้น้ำปริมาณมากขึ้นในการระเหยเพื่อเติมไอน้ำเข้าไปในอากาศจนกว่าจะได้ค่าตามที่กำหนด ซึ่งระบบควบคุมความชื้นสัมพัทธ์ใช้พลังงานไฟฟ้าต่ำสุดและระบบควบคุมอุณหภูมิมีการใช้พลังงานไฟฟ้าสูงสุด จึงทำให้ระบบควบคุมอุณหภูมินั้นมีค่าใช้จ่ายสูงที่สุด เมื่อเปรียบเทียบกับระบบควบคุมความชื้นสัมพัทธ์และระบบควบคุมแรงดึงระเหยน้ำของอากาศ

Article Details

How to Cite
[1]
จันพายัพ ว., ตรีอำนรรค เ., และ ตรีอำนรรค ก., “การควบคุมอุณหภูมิและความชื้นสัมพัทธ์ในโรงเรือนเพาะปลูกที่ใช้ระบบทำความเย็นแบบแผ่นระเหยน้ำ”, RMUTP Sci J, ปี 18, ฉบับที่ 2, น. 175–187, ธ.ค. 2024.
บท
บทความวิจัย (Research Articles)

References

T. Thongket, Growing plants in greenhouses, Bangkok: Kasetsart University, 2007.

M. Soussi, M. T. Chaibi, M. Buchholz, and Z. Saghrouni, “Comprehensive Review on Climate Control and Cooling Systems in Greenhouses under Hot and Arid Conditions,” Agronomy, vol. 12, no. 626, 2022.

C. Saowarat, “AUTOMATIC CLIMATE CONTROL IN GREENHOUSE BY FOGGING SYSTEM,” M.Eng. thesis, Program in Mechanical and Process System, Suranaree Univ. of Technology, Nakhon Ratchasima, Thailand, 2017.

K. Simek, “REDUCTION OF HEAT FROM SOLAR ENERGY FOR MISTING GREENHOUSE,” M.Eng. thesis, Program in Mechanical and Process System Engineering, Suranaree Univ. of Technology, Nakhon Ratchasima, Thailand, 2019.

I. Tsafaras, J. B. Campen, C. Stanghellini, H. F. de Zwart, W. Voogt, K. Scheffers, A. Harbi and K. Assaf, “Intelligent greenhouse design decreases water use for evaporative cooling in arid regions,” Agricultural Water Management, vol. 250, 2021.

W. Baudoin, R. Nono-Womdim, N. Lutaladio, and A. Hodder, Good Agricultural Practices for greenhouse vegetable crops, Rome: Food and Agriculture Organization of the United Nations, 2013.

S. Ghani, F. Bakochristou, E. M. Elbialy, S. M. Gamaledin, M. M. Rashwan, A. M. Abdelhalim and S. M. Ismail, “Design challenges of agricultural greenhouses in hot and arid environments – A review,” Engineering in Agriculture, Environment and Food, vol. 12, no. 1, pp. 48-70, Jan. 2019.

I. Norkaew, “Energy Saving in Climatic Controlled Greenhouse with Evaporative cooling Using Excess Cool Water from Ice Factory,” M.Eng. thesis, Graduate School, Chiang Mai Univ, Chiang Mai, Thailand, 2000.

A. Arble, O. Yekutieli, and M. Barak, “Performance of a Fog System for Cooling Greenhouses,” Journal of Agricultural Engineering Research, vol. 72, no. 2, pp. 129-136, 1999.

C. Kittas, T. Bartzanas, and A. Jaffrin, “Temperature Gradients in a Partially Shaded Large Greenhouse equipped with Evaporative Cooling Pads,” Biosystems Engineering, vol. 85, no. 1, pp. 87-94, 2003.

J. Xu, Y. Li, R. Z. Wang, W. Liu, and P. Zhou, “Experimental performance of evaporative cooling pad systems in greenhouses in humid subtropical climates,” Applied Energy, vol. 138, pp. 291-301, Jan. 2015.

M. Sultan, T. Miyazaki, B. B. Saha, and S. Koyama, “Steady-state investigation of water vapor adsorption for thermally driven adsorption based greenhouse air-conditioning system,” Renewable Energy, vol. 86, pp. 785-795, Feb. 2016.

M. Amani, S. Foroushani, M. Sultan, and M. Bahrami, “Comprehensive review on dehumidification strategies for agricultural greenhouse applications,” Applied Thermal Engineering, vol. 181, Nov. 2020.

F. W. Murray, “On the computation of saturation vapor pressure,” Journal of Applied Meteorology, vol. 6, pp. 203-204, Feb. 1967.

ASHRAE Handbook Fundamentals, American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 2009.

H. Oz, A. Atilgan, K. Buyuktas, and T. Alagoz, “The efficiency of fan-pad cooling system in greenhouse and building up of internal greenhouse temperature map,” African Journal of Biotechnology, vol. 8, no.20, pp. 5436-5444, Oct. 2009.

M. Dayioglu and H. Sİllelİ, “Performance Analysis of a Greenhouse Fan-Pad Cooling System: Gradients of Horizontal Temperature and Relative Humidity,” Journal of Agricultural Sciences, vol. 21, no. 1, pp. 132-143, 2015.

I. M. A. Aljubury and H. D. Ridha, “Enhancement of evaporative cooling system in a greenhouse using geothermal energy,” Renewable Energy, vol. 111, pp. 321-331, Oct. 2017.

A. Alsadon, I. Al-Helal, A. Ibrahim, A. Abdel-Ghany, S. Al-Zaharani, and T. Ashour, “The effects of plastic greenhouse covering on cucumber (Cucumis sativus L.) growth,” Ecological Engineering, vol. 87, pp. 305-312, Feb. 2016.