Effect of Mg Content on Synthesis of TiC Powder from Leucoxene by Self-Propagating High-Temperature Synthesis Method
Article Sidebar
Main Article Content
Abstract
Titanium carbide (TiC) composite powder was synthesized via the self-propagating high-temperature synthesis (SHS) method using leucoxene as a source of titanium oxide (TiO2) and magnesium (Mg) as an initiator. The effect of Mg content on synthesized TiC composite powder was characterized in terms of chemical composition and morphology by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. Results showed that adding 1.5 moles Mg into the reactant system leached with 0.1 M hydrochloric acid solution was the optimal condition, and TiC was apparent in the XRD analysis at a particle size of less than 150 μm.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
Laixue, P.; Dajin, X.; Aiqin, Z.; Jing, X.; Jinsheng, Z. Microstructure and mechanical properties of Fe3Al-TiC composites. International Journal of Materials Research. 2013, 101, 865-868.
Jain, J.W.; Jun, J.H.; Zhi, M.G.; Song, W. Plasma preparation and low temperature sintering of spherical TiC-Fe composite powder. International Journal of Minerals, Metallurgy and Materials. 2015, 1328-1333.
Hui, W.; Wencheng, Z.; Yanchun, L.; Lingke, Z.; Luyi, S. The Microwave-Assisted Green Synthesis of TiC Powders. Materials. 2016, 9, 904.
Baoyan, L.; Xin, H.; Qin, Z.; Yucheng, Z.; Mingzhi, Wang. TiC/Ti3SiC2 composite prepared by mechanical alloying. International Journal of Refractory Metals and Hard Materials. 2009, 664-666.
Asadi, A.; Zandrahimi, M.; Ebrahimi, K.R.; Saidi, A.; Seyedalangi, S.M. New procedure for electrochemical production of Ni-TiC composite powder. Powder Metallurgy. 2010, 53(1), 47-50.
Sangita, M.; Dilip, K. M.; Saroj, K.S. Microscopic and spectroscopic analyses of TiC powder synthesized by thermal plasma technique. Powder Technology. 2013, 237, 41-45.
Aitao, T.; Shengming, L.; Fusheng, P. Novel approaches to produce Al2O3-TiC/TiCN-Fe composite powder directly from ilmenite. Progress in Natural Science: Materials International. 2013, 23(5), 501-507.
Hu, J.L.; et al. Effects of different carbon sources and reaction temperatures on the synthesis of SiC-TiC composite powders by carbothermal reduction. Journal of Ceramic Processing Research. 2017, 18(1), 79-85.
Ahram, M.; Chang, Y.S.; Jiwoong, K.; Hanjung, K. Fabrication of TiC-ZrC-Co composites with refined microstructure using ultrafine TiC-ZrC mixture powders. Journal of Alloys and Compounds. 2018, 740, 82-87.
Chanadee, T. Experimental studies on self-propagating high-temperature synthesis of Si-SiC composite from reactants of SiO2 derived from corn cob ash/C/Mg. Journal of the Australian Ceramic Society. 2017, 53(1), 245-252.
Saowanee, S.; Niyomwas, S.; Chanadee, T. Synthesis and Characterization of ZrB2-ZrC Composite Powders form Zircon Sand by Self-Propagating High-Temperature Synthesis Method. Materials Science Forum. 2018, 934, 66-70.
Maung, S.T.M.; Chananee, T.; Niyomwas, S. Intermetallic WSi2-W5Si3 Alloy by Magnesiothermic SHS Reaction. International Journal of Self-Propagating High-Temperature Synthesis. 2019, 28, 50-55.
Niyomwas, S.; Sathaporn, T.; Singsarothai, S. Synthesis and characterization of BaTiO3-BaAl2O4 composite by self-propagating high-temperature synthesis method. IOP Conference Series: Materials Science and Engineering. 2011, 18.
Azizov, Sh.T.; Kachin, A.R.; Loryan, V.E.; Borovinskaya, I.P.; Mnatsakanyan, A.S. Aluminothermic SHS of Ferrotitanium from Ilmenite: Influence of Al and KClO4 Content of Green Composite. International Journal of Self-Propagating High-Temperature Synthesis. 2014, 23, 161-164.
Prusoc, E.S.; Panfilov, A.A.; Kechin, V.A. Formation of phase composition of aluminum matrix composites during mechanical activation and self-propagating high-temperature synthesis. IOP Conference Series: Materials Science and Engineering. 2020, 896.
Kobashi, M.; Ichioka, D.; Kanetake, N. Combustion Synthesis of Porous TiC/Ti Composite by a Self-Prop Mode. Materials. 2010, 3, 3939-3947.
Zhengguang, Z.; Jinlian, L.; Yi, W. The Study of Self-propagating High-temperature Synthesis of TiC-Al2O3/Fe Composites form Natural Ilmenite. Key Engineering Materials. 2007, 280-283, 1103-1106.
Na, W.; Hong, Z.C.; Jie, W.; Jun, W.; Guan L.W.; Chen, J. Effects of Forming Conditions and TiC-TiB2 Contents on the Microstructures of Self-Propagating High-Temperature Synthesized NiAl-TiC-TiB2 Composites. Acta Metallurgy Sinica (English Letters). 2015, 28(1), 39-47.
Niyomwas, S. Synthesis and Characterization of Silicon–Silicon Carbide Composites from Rice Husk Ash via Self-Propagating High Temperature Synthesis. Journal of Metals, Materials and Minerals. 2009, 19(2), 21-25.
Dur˜aes, L.; Costa, B.; Santos, R.; et al. Fe2O3/Aluminum Thermite Reaction Intermediate and Final Products Characterization. Materials Science and Engineering: A. 2007, 465(1/2), 199-210.
Delmas, F.; Goncalves, L.; Martins, I.; Oliveira, M.; Magnesium Removal from TiC-TiB2 SHS Powders by controlled Hot Acid Leaching. Materials Science Forum. 2006, 514-516, 594-598.
Ignat'eva, T. I.; Vershinnikov, V. I.; Semenova, V. N.; Miloserdova, O. M. Extraction of TiAl Powder from SHS-Produced TiAl-MgO Semiproduct by Treatment in Different Solutions. International Journal of Self-Propagating High-Temperature Synthesis. 2017, 26(2), 115-118.
Radishevskaya, N, I.; Nazarova, A. Y.; Lvov, O. V.; Kasatsky, N. G.; Kitler, V. D. Synthesis of magnesium aluminate spinel in the MgO-Al2O3-Al system using the SHS method. Key Engineering Materials. 2019, 1214.
Choi, S.H.; Sim, J.J.; Lim, J.H.; Seo, S.J.; Kim, D.W.; Hyun, S.K.; Park, K.T. Removal of Mg and MgO By-Products through Magnesiothermic Reduction of Ti Powder in Self-Propagating High-Temperature Synthesis. Metals. 2019, 9, 169.
Chanadee, T.; Singsarothai, S. Effect of High-Energy Milling on Magnesiothermic Self-Propagating High-Temperature Synthesis in a Mixture of SiO2, C, and Mg Reactant Powders. Combustion, Explosion, and Shock Waves. 2019, 55(1), 97-106.
Chanadee, T.; Singsarothai, S. Self-Propagating High-Temperature Synthesis of Si-SiC Composite Powder. Key Engineering Materials. 2016, 675-676, 623-626.
Lok, J.Y.; Logan, K.V.; Payyapilly, J.J. Acid Leaching of SHS Produced Magnesium Oxide/Titanium Diboride. Journal of the American Ceramic Society. 2009, 92(1), 26-31.