Vol. 9 No. 1 (2023): January - June

Research Papers

• 

  Optimization of Wire Electrical Discharge Machining Process Parameters for Al7075/Al2O3/SiC Composite using Aspect Ratios of Taguchi Method, Taguchi-Pareto and Taguchi-ABC Methods doi: 10.14456/mijet.2023.1

  Meshach Chukwuebuka Ikedue, Sunday Ayoola Oke

  1-16

  • PDF doi: 10.14456/mijet.2023.1
• 

  Airborne Infection Isolation Room with Low-Cost Operating System doi: 10.14456/mijet.2023.2

  Nawee Nuntapap, Pracha Yeunyongkul, Jirasak Panya, Supachat Krudtong, Korawat Wuttikid, Thanawat Watcharadumrongsak, Srithorn Aupakham, Theerapat Boonsri, Parkpoom Jarupoom, Arpiruk Hokpunna, Nattaporn Chaiyat, Ronnachart Munsin

  17-23

  • PDF doi: 10.14456/mijet.2023.2
• 

  Finger Strength Assessment Device for Thai Traditional Massage Training doi: 10.14456/mijet.2023.3

  Prarin Chupawa, Kiattisin Kanjanawanishkul, Wanlapa Leelananthakul

  24-30

  • PDF doi: 10.14456/mijet.2023.3
• 

  Parametric Selection and Optimization for the Drilling Of AZ91 Magnesium Alloys Using the Taguchi Method Incorporating Direct and Aspect Parametric Ratios doi: 10.14456/mijet.2023.4

  Samson Oluwaseun Odudare, Sunday Ayoola Oke, Ugochukwu Sixtus Nwankiti

  31-46

  • PDF doi: 10.14456/mijet.2023.4
• 

  Low-Cost Herb Dryer using Infrared Lamps with Circulating Hot Air Blowers doi: 10.14456/mijet.2023.5

  Nattaphol Nasathit, Sarinya Sala-ngam , Liliya Terzieva, Chonlatee Photong

  47-55

  • PDF doi: 10.14456/mijet.2023.5
• 

  Drying Kinetics of House Cricket by Hot Air Drying using Full Air Re-circulation Tunnel under Varying Temperatures and Air Velocities doi: 10.14456/mijet.2023.6

  Bhuchiss Tanwanichkul

  56-61

  • PDF doi: 10.14456/mijet.2023.6
• 

  Enhancement of Brake Pads Production Planning with Time Management and Process Condition Using VBA on Microsoft Excel doi: 10.14456/mijet.2023.7

  Chanitsara Phalawan, Tongjai Satthaphon, Suntaree Unhapipat, Banpot Horbanluekit, Somkid Amornsamannkul

  62-69

  • PDF doi: 10.14456/mijet.2023.7
• 

  Dielectric Properties of Wall-Building Materials in Southeast Asia at 1.12-1.7 GHz doi: 10.14456/mijet.2023.8

  Narathep Phruksahiran

  70-74

  • PDF 10.14456/mijet.2023.8
• 

  Rice Yield Estimation Based on Machine Learning Approaches using MODIS 250 m Data doi: 10.14456/mijet.2023.9

  Woranan Mongkolnithithada , Jurawan Nontapun , Siwa Kaewplang

  75-79

  • PDF doi: 10.14456/mijet.2023.9
• 

  GMPPT-based PSO-FLC for Solar PV Charging System doi: 10.14456/mijet.2023.10

  Rati Wongsathan, Isaravuth Seedadan , Kuakoon Intarakamhaeng

  80-85

  • PDF 10.14456/mijet.2023.10
• 

  Congestion Control in CoAP Protocol: A Case study of Observing Resource with Block-Wise Transfer doi: 10.14456/mijet.2023.11

  Thavrak Chan, Chanwit Suwannapong, Chatchai Khunboa

  86-92

  • PDF doi: 10.14456/mijet.2023.11
• 

  A Decision Model for Concept Design Evaluation for Mechanical Ventilator Machines Used During the COVID-19 Pandemic doi: 10.14456/mijet.2023.12

  Daniel Aikhuele

  93-101

  • PDF doi: 10.14456/mijet.2023.12
• 

  A Hybrid BWM-MCLP Method for Selecting Emergency Medical Service Locations: A Case Study in Maha Sarakham Province, Thailand doi: 10.14456/mijet.2023.13

  Amin Lawong, Nuchsara Kriengkorakot, Preecha Kriengkorakot

  102-108

  • PDF doi: 10.14456/mijet.2023.13
• 

  Effect of Counter Electrode from Waste Carbon in Factory for Dye-Sensitized Solar Cell doi: 10.14456/mijet.2023.14

  Naphat Phunphat, Saharath Rodsin, Thitima Muangphara, Sirawit Chaihang, Pakpoom Chansri, Pattarapol Pooyodying

  109-113

  • PDF doi: 10.14456/mijet.2023.14