Two output power control of induction cooker with full bridge inverter controlled by asymmetrical voltage control
Keywords:
Two induction cookers, Asymmetrical voltage and phase balance control, Induction coilAbstract
This paper presents the two independent power induction furnaces that independently adjust the output power of the full bridge circuit, controlled by asymmetrical voltage cancellation and phase balance control with dsPIC30F2020 IC, total power 1.5 kW. AC 220 V single phase power can adjust the power and heat used to cook food independent of each other that can adjust the power and heat used to cook independently of each other with the IGBT switch generates high-frequency signals and heat-induced coils. Use the induction principle of the magnetic field between the induction cooker can adjust the heat level output has five levels controlled by adjusting the asymmetrical phase balance voltage to divide the current flowing closely through two main switches, which increases efficiency around 8 percentage and it can divide up to 20% difference depending on usage.
References
[2] José MB, Fernando M, José RG, et al. A Two - Output Series-Resonant Inverter for Induction – Heating Cooking Appliances. IEEE Transaction on Industrial Electronics. 2005; 20(4);815 - 22.
[3] Pansuwan T, Nuchkamnead R, Chuchaloem K, et al . Bidirectional Converter with Duty Cycle Control using Solar Energy for CCTV. Electrical Engineering Network of Rajamangala University of Technology EENET 7th; 2015 May 27-29; Chonburi, Thailand. Bangkok; 2015.
[4] Kim JG, Park SW, Kim YH, et al. Bidirectional Soft Switching DC-DC Converter. 2010 International Power Electronics Conference. 2010 June 21-24; Japan; 2010.
[5] Chudjuarjeen S, Jayasuriya S, Yachiangkam S, et al. Analysis of Measurement Delay Errors in a DC-DC Buck-Boost Converter using Stochastic Differential Equations. 37th Annual Conference of the IEEE Industrial Electronics Society (IECON 2011). 2011 Nov 7-10; Melbourne, Australia; 2011.
[6] Chuang YC. High-Efficiency ZCS Buck Converter for Rechargeable Batteries. IEEE Trans Ind Electron. 2010; 57(7):2463–72.
[7] Cheng HL, Lin CW .Design and Implementation of a High-Power Factor LED Driver with Zero-Voltage Switching-On Characteristics. IEEE Trans Power Electron. 2014; 9(9):4949–58.
[8] Inoue S, Akagi H. A bidirectional dc–dc converter for an energy storage system with galvanic isolation. IEEE Trans Power Electron. 2007; 22(6): 2299–2306.
[9] Zhu L. A novel soft-commutating isolated boost full-bridge ZVSPWM DCDC converter for bidirectional high power applications. IEEE Trans Power Electron. 2006; 2 (2):422–29.
[10] Lee J, Jo J, Choi S, et al. A 10-kw SOFC low-voltage battery hybrid power conditioning system for residential use. IEEE Trans Energ Convers. 2006; 21(2):575–85.
[11] Chiu HJ, Lin LW. A bidirectional DCDC converter for fuel cell electric vehicle driving system. IEEE Trans Power Electron. 2006; 21(4):950–58.
[12] Zhao Q, Lee FC. High-efficiency, high step-up DCDC converters. IEEE Trans Power Electron. 2003; 18(1):65–73.
[13] Schuch L, Rech C, Hey HL, et al. Analysis and design of a new high-efficiency bidirectional integrated ZVT PWM converter for DC-bus and battery-bank interface. IEEE Trans Ind Appl. 2006; 42(5):1321–32.
[14] Tan NM, Abe T, Akagi H. Design and performance of a bidirectional isolated DC-DC converter for a battery energy storage system. IEEE Trans Power Electron. 2012; 27(3):1237-1248.
[15] Wang K, Lin CY, Zhu L, et al. Bidirectional dc/dc converters for fuel cell systems. IEEE Trans Power Electron.1998; 21(4):47–51.
[16] Peng FS, Li H, Su GJ, et al. A new ZVS bidirectional DC-DC converter for fuel cell and battery application. IEEE Trans Power Electron.2004; 19(1):54 – 65.
[17] Inoue S, Akagi H. A bidirectional dc-dc converter for an energy storage system with galvanic isolation. IEEE Trans Power Electron.2007; 22(6):2299-2306.
Downloads
Published
How to Cite
Issue
Section
License
กองบรรณาธิการวารสารวิชาการ มหาวิทยาลัยเทคโนโลยีราชมงคลกรุงเทพ มีความยินดีที่จะรับบทความจากอาจารย์ นักวิจัย นักวิชาการทั้งภายในและภายนอกมหาวิทยาลัย ในสาขาวิชาวิทยาศาสตร์และเทคโนโลยี ได้แก่ สาขาวิชาวิทยาศาสตร์ วิศวกรรมศาสตร์ และสาขาอื่นๆ ที่เกี่ยวข้อง รวมถึงสาขาต่างๆ ที่มีการบูรณาการข้ามศาสตร์ที่เกี่ยวข้องวิทยาศาสตร์และเทคโนโลยี ที่เขียนเป็นภาษาไทยหรือภาษาอังกฤษ ซึ่งผลงานวิชาการที่ส่งมาขอตีพิมพ์ต้องไม่เคยเผยแพร่ในสิ่งพิมพ์อื่นใดมาก่อน และต้องไม่อยู่ในระหว่างการพิจารณาของวารสารอื่น
การละเมิดลิขสิทธิ์ถือเป็นความรับผิดชอบของผู้ส่งบทความโดยตรง บทความที่ได้รับการตีพิมพ์ต้องผ่านการพิจารณากลั่นกรองคุณภาพจากผู้ทรงคุณวุฒิและได้รับความเห็นชอบจากกองบรรณาธิการ
ข้อความที่ปรากฏอยู่ในแต่ละบทความที่ตีพิมพ์ในวารสารวิชาการเล่มนี้ เป็นความคิดเห็นส่วนตัวของผู้เขียนแต่ละท่าน ไม่เกี่ยวข้องกับมหาวิทยาลัยเทคโนโลยีราชมงคลกรุงเทพแต่อย่างใด ความรับผิดชอบด้านเนื้อหาและการตรวจร่างบทความแต่ละบทความเป็นของผู้เขียนแต่ละท่าน หากมีความผิดพลาดใดๆ ผู้เขียนแต่ละท่านจะต้องรับผิดชอบบทความของตนเองแต่ผู้เดียว
กองบรรณาธิการขอสงวนสิทธิ์มิให้นำเนื้อหา หรือข้อคิดเห็นใดๆ ของบทความในวารสารวิชาการ มหาวิทยาลัยเทคโนโลยีราชมงคลกรุงเทพ ไปเผยแพร่ก่อนได้รับอนุญาตจากกองบรรณาธิการ อย่างเป็นลายลักษณ์อักษร ผลงานที่ได้รับการตีพิมพ์ถือเป็นลิขสิทธิ์ของวารสาร