Vol. 8 No. 2 (2022): July - December

Published: 2022-11-14

Research Papers

Applying Multi-Criteria Approaches to the Weld Bead Geometry Problem in Laser Welding With Filler Wire Process Using the Al-Mg-Mn-Zr-Er Alloy Sheet doi: 10.14456/mijet.2022.19

Kenechukwu Obinna Okponyia, Sunday Ayoola Oke, Akwaeno Uduak Umoh

142-160
- PDF doi: 10.14456/mijet.2022.19
Simulation of Water Losses for the 1D Salinity Forecasting Model in Chao Phraya River doi: 10.14456/mijet.2022.20

Kachapond Chettanawanit, Theerapol Charoensuk, Narongrit Luangdilok, Watin Thanathanphon, Apimook Mooktaree, Ticha Lolupiman, Kay Khaing Kyaw, Piyamarn Sisomphon

161-166
- PDF doi: 10.14456/mijet.2022.20
Photocatalytic Degradation of Synthetic Dye Wastewater Using Photocatalysts Modified with Coffee Ground-Derived Carbon doi: 10.14456/mijet.2022.21

Tanawat Montreepila, Patiya Kemacheevakul, Surawut Chuangchote

167-171
- PDF doi: 10.14456/mijet.2022.21
Ethnobotany of Zingiberaceae for the Phu Thai Ethnic Group in Nakhon Phanom Province, Thailand doi: 10.14456/mijet.2022.22

Areerat Ragsasilp, Piyaporn Saensouk , Rapeeporn Pholhiamhan, Surapon Saensouk

172-178
- PDF doi: 10.14456/mijet.2022.22
Assessing Reservoir Reoperation Performances through Adapted Rule Curve and Hedging Policies under Climate Change Scenarios: In–depth Investigation of Case Study of Bhumibol Dam in Thailand doi: 10.14456/mijet.2022.23

Khin Muyar Kyaw, Areeya Rittima, Yutthana Phankamolsil, Allan Sriratana Tabucanon, Wudhichart Sawangphol, Jidapa Kraisangka, Yutthana Talaluxmana, Varawoot Vudhivanich

179-185
- PDF doi: 10.14456/mijet.2022.23
Impacts of the 2011 Thailand Flood on Groundwater Recharge Potential in Flood Retention Area in the Middle Reach of Tha Chin River doi: 10.14456/mijet.2022.24

Sasipong Rantasewee, Pattarapong Teerapunyapong, Areeya Rittima, Kritsanat Surakit, Yutthana Phankamolsil, Allan Sriratana Tabucanon, Wudhichart Sawangphol, Jidapa Kraisangka, Yutthana Talaluxmana

186-191
- PDF doi: 10.14456/mijet.2022.24
Sugar Cane Red Stripe Disease Detection using YOLO CNN of Deep Learning Technique doi: 10.14456/mijet.2022.25

Inchaya Kumpala, Nontawat Wichapha, Piyawat Prasomsab

192-197
- PDF doi: 10.14456/mijet.2022.25
Design and Development of Transparent Luminescent Solar Concentrator using Mixed Rock Salt and Polymethyl Methacrylate doi: 10.14456/mijet.2022.26

Thanaruk Prosing, Chonlatee Photong

198-204
- PDF doi: 10.14456/mijet.2022.26
A Multi-Criteria Approach to Maintenance Performance Assessment in a Manufacturing System doi: 10.14456/mijet.2022.27

Desmond Eseoghene Ighravwe, Sunday Ayoola Oke

205-218
- PDF doi: 10.14456/mijet.2022.27
Optimizing the Boring Parameters on CNC Machine using IS 2062 E250 Steel Plates: Taguchi-Pareto-Box Behnken Design and Taguchi-ABC-Box Behnken Design Perspectives doi: 10.14456/mijet.2022.28

Yakubu Umar Abdullahi, Sunday Ayoola Oke

219-241
- PDF doi: 10.14456/mijet.2022.28
Effects of Hot Water Dipping and Storage Materials on Storage Quality of Fresh Galangal Rhizome Alpinia Galanga (Linn.) doi: 10.14456/mijet.2022.29

Jantana Suntudprom, Piyamart Jannok, Khairul Farihan Kasim

242-248
- PDF doi: 10.14456/mijet.2022.29
Effect of Fat Substitution with Pre-gelatinized Riceberry Rice Flour on Physicochemical Properties, Sensory Acceptance and Shelf life of Salad Dressing doi: 10.14456/mijet.2022.30

Pianpan Supakot, Jatupat Samappito, Praphatsorn Rongdon , Sutharinee Yodprom

249-256
- PDF doi: 10.14456/mijet.2022.30
A Tensile Behavioural Analysis Incorporating Tensile Extensions and Energy at Break of Agro-Waste Filled Composites for Lightweight Application doi: 10.14456/mijet.2022.31

Oluwaseyi Ayodele Ajibade, Johnson Olumuyiwa Agunsoye, Sunday Ayoola Oke

257-266
- PDF doi: 10.14456/mijet.2022.31
Application of Taguchi, Taguchi-Pareto and Taguchi-ABC Methods for the Selection and Optimization Problem in Friction Stir Welding Process Parameters of AA6062-T6 Alloy doi: 10.14456/mijet.2022.32

Osita Prince Francis, Sunday Ayoola Oke, Ugochukwu Sixtus Nwankiti

267-280
- PDF doi: 10.14456/mijet.2022.32
Development of Rice Forming using Konjac Flour Mixed with RD43 Rice Flour as Main Components doi: 10.14456/mijet.2022.33

Lamul Wiset, Nattapol Poomsa-ad

281-286
- PDF doi: 10.14456/mijet.2022.33
Improving Belief Propagation Decoding of Polar Codes using Bi-Directional Bit-Flipping Strategy doi: 10.14456/mijet.2022.34

Nuttawat Mitsungnern, Virasit Imtawil, Anupap Meesomboon, Pirat Khunkitti, Watid Phakphisut, Puripong Suthisopapan

287-295
- PDF doi: 10.14456/mijet.2022.34
Influence of Width, Material Type and Layer Thickness of Adhesive on Stress Distribution in Second Molar Restoration by Finite Element Method doi: 10.14456/mijet.2022.35

Keawalin Trongklang, Pongsakorn Poovarodom, Jarupol Suriyawanakul

296-302
- PDF doi: 10.14456/mijet.2022.35
GaN-based Robot Power Supply Design doi: 10.14456/mijet.2022.36

Jie Gan, Mohd Azli Bin Salim, Chonlatee Photong

303-311
- PDF doi: 10.14456/mijet.2022.36
Mass Modeling of Thailand Varieties Pomelo Fruit (Khao-Nampueng Variety) with Overall Width doi: 10.14456/mijet.2022.37

Somwang Leekar, Sombat Khawprateep, Surachai Wongcharee

312-316
- PDF doi: 10.14456/mijet.2022.37
Impact of Imperfect Channel Estimation on the Performance of Signed Quadrature Spatial Modulation in Massive MIMO Systems doi: 10.14456/mijet.2022.38

Wongpram Vongjampa, Patinya Muangkammuen, Puripong Suthisopapan

317-320
- PDF doi: 10.14456/mijet.2022.38
Effect of All-Integer Quantization Decoding in LDPC Coded High Order Modulation Schemes doi: 10.14456/mijet.2022.39

Patinya Muangkammuen, Wongpram Vongjampa, Puripong Suthisopapan

321-324
- PDF doi: 10.14456/mijet.2022.39
Performance of a Rectangular Downdraft Open-top Kiln for a Dual Burner doi: 10.14456/mijet.2022.40

Worawoot Promtow, Sarawut Saenkham, Nantawat Butwong, Sopa Cansee

325-329
- PDF doi: 10.14456/mijet.2022.40
Effect of Drying Condition on Shatavari (Asparagus Racemosus Willd) Root Quality and Energy Consumption doi: 10.14456/mijet.2022.41

Phattharanan Thiangma, Woranan Nakbanpote, Nattapol Poomsa-ad, Lamul Wiset

330-335
- PDF doi: 10.14456/mijet.2022.41
Development of Microclimate Control Room using IoT System for Atmospheric Water Harvesting Research doi: 10.14456/mijet.2022.42

Ronnachart Munsin, Autanan Wannachai, Nopphadon Chongbun, Satit Karnpian, Nachapon Sumankant, Kanthanat Sanwong, Settawut Pinta, Jirasak Panya, Pracha Yeunyongkul, Nawee Nuntapap, Taweesak Mahawan, Arpirak Hokpanna, Nattaporn Chaiyat

336-344
- PDF doi: 10.14456/mijet.2022.42

Vol. 8 No. 2 (2022): July - December

Research Papers

Applying Multi-Criteria Approaches to the Weld Bead Geometry Problem in Laser Welding With Filler Wire Process Using the Al-Mg-Mn-Zr-Er Alloy Sheet doi: 10.14456/mijet.2022.19

Simulation of Water Losses for the 1D Salinity Forecasting Model in Chao Phraya River doi: 10.14456/mijet.2022.20

Photocatalytic Degradation of Synthetic Dye Wastewater Using Photocatalysts Modified with Coffee Ground-Derived Carbon doi: 10.14456/mijet.2022.21

Ethnobotany of Zingiberaceae for the Phu Thai Ethnic Group in Nakhon Phanom Province, Thailand doi: 10.14456/mijet.2022.22

Assessing Reservoir Reoperation Performances through Adapted Rule Curve and Hedging Policies under Climate Change Scenarios: In–depth Investigation of Case Study of Bhumibol Dam in Thailand doi: 10.14456/mijet.2022.23

Impacts of the 2011 Thailand Flood on Groundwater Recharge Potential in Flood Retention Area in the Middle Reach of Tha Chin River doi: 10.14456/mijet.2022.24

Sugar Cane Red Stripe Disease Detection using YOLO CNN of Deep Learning Technique doi: 10.14456/mijet.2022.25

Design and Development of Transparent Luminescent Solar Concentrator using Mixed Rock Salt and Polymethyl Methacrylate doi: 10.14456/mijet.2022.26

A Multi-Criteria Approach to Maintenance Performance Assessment in a Manufacturing System doi: 10.14456/mijet.2022.27

Optimizing the Boring Parameters on CNC Machine using IS 2062 E250 Steel Plates: Taguchi-Pareto-Box Behnken Design and Taguchi-ABC-Box Behnken Design Perspectives doi: 10.14456/mijet.2022.28

Effects of Hot Water Dipping and Storage Materials on Storage Quality of Fresh Galangal Rhizome Alpinia Galanga (Linn.) doi: 10.14456/mijet.2022.29

Effect of Fat Substitution with Pre-gelatinized Riceberry Rice Flour on Physicochemical Properties, Sensory Acceptance and Shelf life of Salad Dressing doi: 10.14456/mijet.2022.30

A Tensile Behavioural Analysis Incorporating Tensile Extensions and Energy at Break of Agro-Waste Filled Composites for Lightweight Application doi: 10.14456/mijet.2022.31

Application of Taguchi, Taguchi-Pareto and Taguchi-ABC Methods for the Selection and Optimization Problem in Friction Stir Welding Process Parameters of AA6062-T6 Alloy doi: 10.14456/mijet.2022.32

Development of Rice Forming using Konjac Flour Mixed with RD43 Rice Flour as Main Components doi: 10.14456/mijet.2022.33

Improving Belief Propagation Decoding of Polar Codes using Bi-Directional Bit-Flipping Strategy doi: 10.14456/mijet.2022.34

Influence of Width, Material Type and Layer Thickness of Adhesive on Stress Distribution in Second Molar Restoration by Finite Element Method doi: 10.14456/mijet.2022.35

GaN-based Robot Power Supply Design doi: 10.14456/mijet.2022.36

Mass Modeling of Thailand Varieties Pomelo Fruit (Khao-Nampueng Variety) with Overall Width doi: 10.14456/mijet.2022.37

Impact of Imperfect Channel Estimation on the Performance of Signed Quadrature Spatial Modulation in Massive MIMO Systems doi: 10.14456/mijet.2022.38

Effect of All-Integer Quantization Decoding in LDPC Coded High Order Modulation Schemes doi: 10.14456/mijet.2022.39

Performance of a Rectangular Downdraft Open-top Kiln for a Dual Burner doi: 10.14456/mijet.2022.40

Effect of Drying Condition on Shatavari (Asparagus Racemosus Willd) Root Quality and Energy Consumption doi: 10.14456/mijet.2022.41

Development of Microclimate Control Room using IoT System for Atmospheric Water Harvesting Research doi: 10.14456/mijet.2022.42

Make a Submission

thaijo

Information

logo

GoogleScholar

visitor

Developed By